From: Georgi Kehaiov <nortalion@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] Missing disable_ani in /sys/kernel/debug/ieee80211/phy0/ath9k
Date: Tue, 20 May 2014 11:17:07 +0200 [thread overview]
Message-ID: <537B1D93.9040601@gmail.com> (raw)
Hello everyone,
I've got an Atheros AR5416 wireless network adapter and I'm experiencing
the problem described in
https://bugzilla.kernel.org/show_bug.cgi?id=42092 So I tried to execute
the official solution (echo 1 >
/sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani) but for some reason
or other I am missing the disable_ani file. Is this file located
somewhere else now? Have I done something wrong? I am running a 3.14.4
kernel.
Any help will be much appreciated.
Here is some system information you might find useful (kernel config,
lsmod, module load options, lspci and the contents of
/sys/kernel/debug/ieee80211/phy0/ath9k):
$ zgrep CONFIG_ATH /proc/config.gz
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
CONFIG_ATH_DEBUG=y
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
# CONFIG_ATH6KL is not set
# CONFIG_ATH10K is not set
$ lsmod | grep ath
12:ath9k 165273 0
13:ath9k_common 1906 1 ath9k
14:ath9k_hw 438914 2 ath9k_common,ath9k
15:ath 20040 3 ath9k_common,ath9k,ath9k_hw
16:led_class 3611 1 ath9k
17:mac80211 585093 1 ath9k
27:cfg80211 459335 3 ath,ath9k,mac80211
$ cat /etc/modprobe.d/ath9k.conf
options ath9k debug=0xffffffff
$ lspci -k | grep Wireless -A 3
80:04:06.0 Network controller: Qualcomm Atheros AR5416 Wireless Network
Adapter [AR5008 802.11(a)bgn] (rev 01)
81- Subsystem: Qualcomm Atheros Device 3071
82- Kernel driver in use: ath9k
83- Kernel modules: ath9k
# ls /sys/kernel/debug/ieee80211/phy0/ath9k/ -1
ani
antenna_diversity
base_eeprom
bt_ant_diversity
btcoex
debug
dma
dump_nfcal
gpio_mask
gpio_val
ignore_extcca
interrupt
misc
modal_eeprom
paprd
phy_err
qlen_be
qlen_bk
qlen_vi
qlen_vo
queues
recv
regdump
regidx
regval
reset
rx_chainmask
spectral_count
spectral_fft_period
spectral_period
spectral_scan0
spectral_scan_ctl
spectral_short_repeat
tx_chainmask
xmit
Regards,
Georgi Kehaiov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140520/cf65db33/attachment.htm
next reply other threads:[~2014-05-20 9:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-20 9:17 Georgi Kehaiov [this message]
2014-05-21 10:34 ` [ath9k-devel] Missing disable_ani in /sys/kernel/debug/ieee80211/phy0/ath9k Rajkumar Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537B1D93.9040601@gmail.com \
--to=nortalion@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.