From: Beomho Seo <beomho.seo@samsung.com>
To: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
Tomasz Figa <t.figa@samsung.com>,
Kukjin Kim <kgene.kim@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Thomas Abraham <thomas.abraham@linaro.org>
Cc: Myungjoo Ham <myungjoo.ham@samsung.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH] Documentation: remove gpio-samsung device tree bindings documentation
Date: Wed, 21 May 2014 20:22:27 +0900 [thread overview]
Message-ID: <537C8C73.8050606@samsung.com> (raw)
This patch remove gpio-samsung device tree bindings documentation.
Already a pictrl driver used for exynos4 and 5. If want to know about
gpio pin control(e.g. mux function, confiugration), refer to samsung-pinctrl
device tree bindings documentation.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
.../devicetree/bindings/gpio/gpio-samsung.txt | 41 --------------------
1 file changed, 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
- region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
- should be the following with values derived from the SoC user manual.
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [mux function]
- [flags and pull up/down]
- [drive strength]>
-
- Values for gpio specifier:
- - Pin number: is a value between 0 to 7.
- - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
- 1 - Pull Down Enabled.
- 3 - Pull Up Enabled.
- Bit 16 (0x00010000) - Input is active low.
- - Drive Strength: 0 - 1x,
- 1 - 3x,
- 2 - 2x,
- 3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
- gpa0: gpio-controller@11400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- gpio-controller;
- };
--
1.7.9.5
reply other threads:[~2014-05-21 11:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537C8C73.8050606@samsung.com \
--to=beomho.seo@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=jh80.chung@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=t.figa@samsung.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.