Re: [PATCH 1/2] ASoC: max98090: Add master clock handling

[Stephen Warren <swarren@wwwdotorg.org>]

On 05/22/2014 03:17 AM, Tushar Behera wrote:
> If master clock is provided through device tree, then update
> the master clock frequency during set_sysclk.
> 
> Documentation has been updated to reflect the change.

> diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c

> @@ -1929,6 +1930,11 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai,
>  	if (freq == max98090->sysclk)
>  		return 0;
>  
> +	if (!IS_ERR(max98090->mclk)) {
> +		freq = clk_round_rate(max98090->mclk, freq);
> +		clk_set_rate(max98090->mclk, freq);
> +	}

What are the intended semantics of set_sysclk()?
sound/soc/tegra/tegra_wm98090.c assumes that set_sysclk() is a
notification to the CODEC driver to tell it what rate the MCLK input is
set to (the rate is set before calling set_sysclk), whereas the code
above assumes that this function is to tell the CODEC to somehow
configure its input clock to be a particular rate. I have a feeling the
code above might fail on Tegra.