From: "Dr. Markus Eich" <markus.eich@dfki.de>
To: "Iorga, Cristian" <cristian.iorga@intel.com>,
"poky@yoctoproject.org" <poky@yoctoproject.org>
Subject: Re: Problem Building DHCP into image
Date: Fri, 23 May 2014 17:03:38 +0200 [thread overview]
Message-ID: <537F634A.5010305@dfki.de> (raw)
In-Reply-To: <969F26A8BAB325438E7EB80D3C3134FB1CEB4D96@IRSMSX105.ger.corp.intel.com>
Thank you that did the trick. I have now installed dhclient on the image.
using
INSTALL +="dhcp-client"
But I somehow cannot enable it in systemd.
on the target machine I have lots of .service scripts in
/lib/systemd/system
but all the dhcp services are missing. I have found that there is a recipe
dhcp_4.2.5-P1.bbappend
in meta-openembedded/meta-systemd/oe-core/recipes-connectivity/dhcp
which uses
do_install_append() {
install -d ${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhclient.service
${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhcrelay.service
${D}${systemd_unitdir}/system
}
but it seems that it is not installed. How can I tell my recipe to add
the corresponding services?
Cheers,
Markus
Am 23.05.2014 15:21, schrieb Iorga, Cristian:
> Hello Markus,
>
> By running:
> bitbake dhcp
> you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things).
> By adding IMAGE_INSTALL, you try to add a certain package into the build.
> I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow.
> Now, the dhcp recipe will build the following packages:
> dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc.
> I believe that you want to add one of this to your image (server, client, etc).
>
> Regards,
> Cristian Iorga
> YP
> Intel Corporation
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Dr. Markus Eich
> Sent: Thursday, May 22, 2014 6:23 PM
> To: poky@yoctoproject.org
> Subject: [poky] Problem Building DHCP into image
>
> Dear all,
>
> I try to build a yocto image using the following receipe
>
> http://pastebin.com/SyW3MZrL
>
>
> The build config is
>
>
> Build Configuration:
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "overo"
> DISTRO = "poky"
> DISTRO_VERSION = "1.5.1"
> TUNE_FEATURES = "armv7a vfp neon"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
> meta-oe
> meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
> meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
> meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
> meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
>
> The problem is building the dhcp part, i.e.
>
> IMAGE_INSTALL += " \
> dhcp\
> "
>
> using bitbake dhcp runs fine, but
>
> bitbake my image (see pastbin) results in
>
>
> | Configuring iftop.
> | Collected errors:
> | * opkg_install_cmd: Cannot install package dhcp.
> | WARNING:
> /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1
> exit 255 from
> | opkg-cl ${ipkg_args} install ${package_to_install}
> | ERROR: Function failed: do_rootfs (log file is located at
> /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
> ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
> do_rootfs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed.
> No currently running tasks (5619 of 5621)
>
> Summary: 1 task failed:
> /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
> Summary: There was 1 WARNING message shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
> Any ideas?
>
> Cheers,
>
> Markus
>
>
>
>
> --
> Dr.-Ing. Markus Eich
>
> Senior Researcher
> Marine Inspection Robotics
> Space Robotics
>
> Besuchsadresse der Nebengeschäftstelle:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 5
> 28359 Bremen, Germany
>
> Postadresse der Hauptgeschäftsstelle Standort Bremen:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 1
> 28359 Bremen, Germany
>
> Tel.: +49 421 178 45-4105
> Zentrale: +49 421 178 45-0
> Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
> E-Mail: markus.eich@dfki.de
>
> Weitere Informationen: http://www.dfki.de/robotik
> -----------------------------------------------------------------------
> Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
> Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
> Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
> (Vorsitzender) Dr. Walter Olthoff
> Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
> Amtsgericht Kaiserslautern, HRB 2313
> Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
> USt-Id.Nr.: DE 148646973
> Steuernummer: 19/673/0060/3
> -----------------------------------------------------------------------
>
> --
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
prev parent reply other threads:[~2014-05-23 15:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
[not found] ` <537E1D0B.4050909@dfki.de>
2014-05-22 16:07 ` Gary Thomas
2014-05-23 13:21 ` Iorga, Cristian
2014-05-23 15:03 ` Dr. Markus Eich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537F634A.5010305@dfki.de \
--to=markus.eich@dfki.de \
--cc=cristian.iorga@intel.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.