From: Lars-Peter Clausen <lars@metafoo.de>
To: Paul Handrigan <Paul.Handrigan@cirrus.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, pawel.moll@arm.com,
ijc+devicetree@hellion.org.uk, broonie@kernel.org,
brian.austin@cirrus.com, lgirdwood@gmail.com, robh+dt@kernel.org,
galak@codeaurora.org
Subject: Re: [PATCH 2/2] ASoC: Add support for CS4265 CODEC
Date: Sat, 24 May 2014 18:14:50 +0200 [thread overview]
Message-ID: <5380C57A.9050603@metafoo.de> (raw)
In-Reply-To: <1400872614-21666-2-git-send-email-Paul.Handrigan@cirrus.com>
On 05/23/2014 09:16 PM, Paul Handrigan wrote:
[...]
A couple of trivial bits:
> @@ -300,6 +301,10 @@ config SND_SOC_CS42L73
> tristate "Cirrus Logic CS42L73 CODEC"
> depends on I2C
>
> +config SND_SOC_CS4265
> + tristate "Cirrus Logic CS4265 CODEC"
> + depends on I2C
select REGMAP_I2C
> +
> # Cirrus Logic CS4270 Codec
> config SND_SOC_CS4270
> tristate "Cirrus Logic CS4270 CODEC"
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index 1ccdaf0..b3c6b5f 100644
[...]
> diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c
> new file mode 100644
> index 0000000..f7a6be9
> --- /dev/null
> +++ b/sound/soc/codecs/cs4265.c
> @@ -0,0 +1,716 @@
[...]
> +struct cs4265_private {
> + struct cs4265_platform_data pdata;
> + struct regmap *regmap;
> + struct snd_soc_codec *codec;
> + struct device *dev;
Both the codec and the dev field don't seem to be used.
> + u8 format;
> + u32 sysclk;
> +};
> +
[...]
> +
> +static const struct soc_enum digital_input_mux_enum =
> + SOC_ENUM_SINGLE(CS4265_SIG_SEL, 7,
> + ARRAY_SIZE(digital_input_mux_text),
> + digital_input_mux_text);
SOC_ENUM_SINGLE_DECL(), same for the other enums below.
> +
[...]
> +static struct snd_soc_dai_ops cs4265_ops = {
const
> + .hw_params = cs4265_pcm_hw_params,
> + .digital_mute = cs4265_digital_mute,
> + .set_fmt = cs4265_set_fmt,
> + .set_sysclk = cs4265_set_sysclk,
> +};
[...]
> +static struct snd_soc_codec_driver soc_codec_dev_cs4265 = {
const
The soc_codec_dev_foobar naming scheme used in some older driver comes from
a time where there were no CODEC drivers. A better naming scheme for new
driver is foobar_codec_driver.
> + .probe = cs4265_probe,
> + .remove = cs4265_remove,
> + .set_bias_level = cs4265_set_bias_level,
> +
> + .dapm_widgets = cs4265_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(cs4265_dapm_widgets),
> + .dapm_routes = cs4265_audio_map,
> + .num_dapm_routes = ARRAY_SIZE(cs4265_audio_map),
> +
> + .controls = cs4265_snd_controls,
> + .num_controls = ARRAY_SIZE(cs4265_snd_controls),
> +};
> +
> +static struct regmap_config cs4265_regmap = {
const
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = CS4265_MAX_REGISTER,
> + .reg_defaults = cs4265_reg_defaults,
> + .num_reg_defaults = ARRAY_SIZE(cs4265_reg_defaults),
> + .readable_reg = cs4265_readable_register,
> + .volatile_reg = cs4265_volatile_register,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
[...]
next prev parent reply other threads:[~2014-05-24 16:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 19:16 [PATCH 1/2] ASoC: cs4265: bindings: sound: Add bindings for CS4265 CODEC Paul Handrigan
[not found] ` <1400872614-21666-1-git-send-email-Paul.Handrigan-jGc1dHjMKG3QT0dZR+AlfA@public.gmane.org>
2014-05-23 19:16 ` [PATCH 2/2] ASoC: Add support " Paul Handrigan
[not found] ` <1400872614-21666-2-git-send-email-Paul.Handrigan-jGc1dHjMKG3QT0dZR+AlfA@public.gmane.org>
2014-05-23 20:39 ` Mark Brown
[not found] ` <20140523203945.GN22111-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-05-24 14:18 ` Handrigan, Paul
2014-05-31 22:08 ` Handrigan, Paul
2014-05-24 16:14 ` Lars-Peter Clausen [this message]
[not found] ` <5380C57A.9050603-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2014-05-27 17:09 ` [alsa-devel] " Handrigan, Paul
2014-05-23 20:28 ` [PATCH 1/2] ASoC: cs4265: bindings: sound: Add bindings " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5380C57A.9050603@metafoo.de \
--to=lars@metafoo.de \
--cc=Paul.Handrigan@cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=brian.austin@cirrus.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.