>Hi, just wondered if AMD K10 chips are supported yet? I searched the list for 
>this topic and see a patch from Oct 08, but it's confusing whether this patch 
>is working or not because of some errata on AMD's part. I see we also have 
>IT8720 capability according to sensors-detect, but this is not available yet 
>for us to use either.  Is there any (other) way to monitor temperatures on 
>this platform (Asus M4N78 pro motherboard, AMD Phenom II Deneb 920 cpu)?
>
>Thanks in advance for any info :)

Hi, i also try to get CPU temp info from a system we just got. It is 
Tyan Thunder s4985g3nr-e motherboard with an additional cpu board, so we
 have
 8 Opterons, qadcore all. I downloaded the rewritten k8temp source and 
recompiled. Also downloaded lm_sensors 3.1.0 and installed it. Using the new 
k8temp module and the new sensors, the output i get is:

w83627hf-isa-0c00
Adapter: ISA adapter
in0:         +1.78 V  (min =  +0.00 V, max =  +4.08 V)
in1:         +1.76 V  (min =  +0.00 V, max =  +4.08 V)
in2:         +3.36 V  (min =  +2.82 V, max =  +3.79 V)
in3:         +2.96 V  (min =  +4.02 V, max =  +2.48 V)
in4:         +1.46 V  (min =  +4.08 V, max =  +4.08 V)
in5:         +1.49 V  (min =  +4.08 V, max =  +4.08 V)
in6:         +1.17 V  (min =  +4.08 V, max =  +4.08 V)
in7:         +3.33 V  (min =  +4.08 V, max =  +4.08 V)
in8:         +0.06 V  (min =  +4.08 V, max =  +4.08 V)
fan1:          0 RPM  (min =    0 RPM, div = 2)
fan2:          0 RPM  (min =    0 RPM, div = 2)
fan3:          0 RPM  (min =    0 RPM, div = 2)
temp1:      
 +32.0 C  (high =  -1.0 C, hyst =  -1.0 C)  sensor = thermistor
temp2:       +32.5 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
temp3:       +34.5 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
cpu0_vid:   +0.000 V
beep_enable:enabled

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +7.5 C                                    

k10temp-pci-00cb
Adapter: PCI adapter
temp1:       +17.5 C                                    

k10temp-pci-00d3
Adapter: PCI adapter
temp1:        +8.5 C                                    

k10temp-pci-00db
Adapter: PCI adapter
temp1:        +8.0 C                                    

k10temp-pci-00e3
Adapter: PCI adapter
temp1:       +12.0 C                                    

k10temp-pci-00eb
Adapter: PCI adapter
temp1:        +4.5 C                                    

k10temp-pci-00f3
Adapter: PCI
 adapter
temp1:        +4.4 C                                    

k10temp-pci-00fb
Adapter: PCI adapter
temp1:        +7.5 C


I know the temps are supposed to be relative to some value, this is just 
the point where i currently am. Also the 8 cpus, not all the cores are reported.

Peter