All of lore.kernel.org
 help / color / mirror / Atom feed
From: Josh Wu <josh.wu@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] macb: make checkpatch clean
Date: Tue, 27 May 2014 16:07:30 +0800	[thread overview]
Message-ID: <538447C2.7060901@atmel.com> (raw)
In-Reply-To: <1401137718-19394-1-git-send-email-andreas.devel@googlemail.com>

Hi, Dear Andreas

On 5/27/2014 4:55 AM, Andreas Bie?mann wrote:
> This also renames the CONFIG_SYS_MACB_xx defines. They are used just local and
> therefore don't need the CONFIG_SYS_ prefix.
>
> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>

This patch looks good to me.
Reviewed-by: Josh Wu <josh.wu@atmel.com>

Best Regards,
Josh Wu

> ---
>
>   drivers/net/macb.c |   56 +++++++++++++++++++++++++++-------------------------
>   1 file changed, 29 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 781a272..750331d 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -40,11 +40,11 @@
>   
>   #include "macb.h"
>   
> -#define CONFIG_SYS_MACB_RX_BUFFER_SIZE		4096
> -#define CONFIG_SYS_MACB_RX_RING_SIZE		(CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
> -#define CONFIG_SYS_MACB_TX_RING_SIZE		16
> -#define CONFIG_SYS_MACB_TX_TIMEOUT		1000
> -#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT	5000000
> +#define MACB_RX_BUFFER_SIZE		4096
> +#define MACB_RX_RING_SIZE		(MACB_RX_BUFFER_SIZE / 128)
> +#define MACB_TX_RING_SIZE		16
> +#define MACB_TX_TIMEOUT		1000
> +#define MACB_AUTONEG_TIMEOUT	5000000
>   
>   struct macb_dma_desc {
>   	u32	addr;
> @@ -170,7 +170,7 @@ int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
>   	struct eth_device *dev = eth_get_dev_by_name(devname);
>   	struct macb_device *macb = to_macb(dev);
>   
> -	if ( macb->phy_addr != phy_adr )
> +	if (macb->phy_addr != phy_adr)
>   		return -1;
>   
>   	arch_get_mdio_control(devname);
> @@ -184,7 +184,7 @@ int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
>   	struct eth_device *dev = eth_get_dev_by_name(devname);
>   	struct macb_device *macb = to_macb(dev);
>   
> -	if ( macb->phy_addr != phy_adr )
> +	if (macb->phy_addr != phy_adr)
>   		return -1;
>   
>   	arch_get_mdio_control(devname);
> @@ -208,11 +208,12 @@ static int macb_send(struct eth_device *netdev, void *packet, int length)
>   
>   	ctrl = length & TXBUF_FRMLEN_MASK;
>   	ctrl |= TXBUF_FRAME_END;
> -	if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
> +	if (tx_head == (MACB_TX_RING_SIZE - 1)) {
>   		ctrl |= TXBUF_WRAP;
>   		macb->tx_head = 0;
> -	} else
> +	} else {
>   		macb->tx_head++;
> +	}
>   
>   	macb->tx_ring[tx_head].ctrl = ctrl;
>   	macb->tx_ring[tx_head].addr = paddr;
> @@ -223,7 +224,7 @@ static int macb_send(struct eth_device *netdev, void *packet, int length)
>   	 * I guess this is necessary because the networking core may
>   	 * re-use the transmit buffer as soon as we return...
>   	 */
> -	for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
> +	for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
>   		barrier();
>   		ctrl = macb->tx_ring[tx_head].ctrl;
>   		if (ctrl & TXBUF_USED)
> @@ -233,7 +234,7 @@ static int macb_send(struct eth_device *netdev, void *packet, int length)
>   
>   	dma_unmap_single(packet, length, paddr);
>   
> -	if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
> +	if (i <= MACB_TX_TIMEOUT) {
>   		if (ctrl & TXBUF_UNDERRUN)
>   			printf("%s: TX underrun\n", netdev->name);
>   		if (ctrl & TXBUF_EXHAUSTED)
> @@ -256,7 +257,7 @@ static void reclaim_rx_buffers(struct macb_device *macb,
>   	while (i > new_tail) {
>   		macb->rx_ring[i].addr &= ~RXADDR_USED;
>   		i++;
> -		if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
> +		if (i > MACB_RX_RING_SIZE)
>   			i = 0;
>   	}
>   
> @@ -295,7 +296,7 @@ static int macb_recv(struct eth_device *netdev)
>   			if (wrapped) {
>   				unsigned int headlen, taillen;
>   
> -				headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
> +				headlen = 128 * (MACB_RX_RING_SIZE
>   						 - macb->rx_tail);
>   				taillen = length - headlen;
>   				memcpy((void *)NetRxPackets[0],
> @@ -306,11 +307,11 @@ static int macb_recv(struct eth_device *netdev)
>   			}
>   
>   			NetReceive(buffer, length);
> -			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
> +			if (++rx_tail >= MACB_RX_RING_SIZE)
>   				rx_tail = 0;
>   			reclaim_rx_buffers(macb, rx_tail);
>   		} else {
> -			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
> +			if (++rx_tail >= MACB_RX_RING_SIZE) {
>   				wrapped = 1;
>   				rx_tail = 0;
>   			}
> @@ -333,7 +334,7 @@ static void macb_phy_reset(struct macb_device *macb)
>   	macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
>   					 | BMCR_ANRESTART));
>   
> -	for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
> +	for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
>   		status = macb_mdio_read(macb, MII_BMSR);
>   		if (status & BMSR_ANEGCOMPLETE)
>   			break;
> @@ -385,9 +386,8 @@ static int macb_phy_init(struct macb_device *macb)
>   	arch_get_mdio_control(netdev->name);
>   #ifdef CONFIG_MACB_SEARCH_PHY
>   	/* Auto-detect phy_addr */
> -	if (!macb_phy_find(macb)) {
> +	if (!macb_phy_find(macb))
>   		return 0;
> -	}
>   #endif /* CONFIG_MACB_SEARCH_PHY */
>   
>   	/* Check if the PHY is up to snuff... */
> @@ -414,7 +414,7 @@ static int macb_phy_init(struct macb_device *macb)
>   		/* Try to re-negotiate if we don't have link already. */
>   		macb_phy_reset(macb);
>   
> -		for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
> +		for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
>   			status = macb_mdio_read(macb, MII_BMSR);
>   			if (status & BMSR_LSTATUS)
>   				break;
> @@ -499,21 +499,23 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
>   
>   	/* initialize DMA descriptors */
>   	paddr = macb->rx_buffer_dma;
> -	for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
> -		if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
> +	for (i = 0; i < MACB_RX_RING_SIZE; i++) {
> +		if (i == (MACB_RX_RING_SIZE - 1))
>   			paddr |= RXADDR_WRAP;
>   		macb->rx_ring[i].addr = paddr;
>   		macb->rx_ring[i].ctrl = 0;
>   		paddr += 128;
>   	}
> -	for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
> +	for (i = 0; i < MACB_TX_RING_SIZE; i++) {
>   		macb->tx_ring[i].addr = 0;
> -		if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
> +		if (i == (MACB_TX_RING_SIZE - 1))
>   			macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
>   		else
>   			macb->tx_ring[i].ctrl = TXBUF_USED;
>   	}
> -	macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
> +	macb->rx_tail = 0;
> +	macb->tx_head = 0;
> +	macb->tx_tail = 0;
>   
>   	macb_writel(macb, RBQP, macb->rx_ring_dma);
>   	macb_writel(macb, TBQP, macb->tx_ring_dma);
> @@ -654,12 +656,12 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
>   
>   	netdev = &macb->netdev;
>   
> -	macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
> +	macb->rx_buffer = dma_alloc_coherent(MACB_RX_BUFFER_SIZE,
>   					     &macb->rx_buffer_dma);
> -	macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
> +	macb->rx_ring = dma_alloc_coherent(MACB_RX_RING_SIZE
>   					   * sizeof(struct macb_dma_desc),
>   					   &macb->rx_ring_dma);
> -	macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
> +	macb->tx_ring = dma_alloc_coherent(MACB_TX_RING_SIZE
>   					   * sizeof(struct macb_dma_desc),
>   					   &macb->tx_ring_dma);
>   

  reply	other threads:[~2014-05-27  8:07 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-26 20:55 [U-Boot] [PATCH] macb: make checkpatch clean Andreas Bießmann
2014-05-27  8:07 ` Josh Wu [this message]
2014-06-11 15:26   ` Tom Rini
2014-06-12  7:23     ` Andreas Bießmann
2014-06-14 16:14 ` [U-Boot] " Andreas Bießmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=538447C2.7060901@atmel.com \
    --to=josh.wu@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.