From: keita kobayashi <keita.kobayashi.ym@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 1/3] ARM: shmobile: APMU: Add Core-Standby-state for Suspend to RAM
Date: Thu, 29 May 2014 07:24:27 +0000 [thread overview]
Message-ID: <5386E0AB.9010906@renesas.com> (raw)
This patch add Core-Standby-state for Suspend to RAM.
Signed-off-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
---
arch/arm/mach-shmobile/include/mach/common.h | 2 +
arch/arm/mach-shmobile/platsmp-apmu.c | 60 ++++++++++++++++++++++++--
2 files changed, 58 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index f7a360e..8f0cd57 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -35,8 +35,10 @@ extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
#ifdef CONFIG_SUSPEND
int shmobile_suspend_init(void);
+void shmobile_smp_apmu_suspend_init(void);
#else
static inline int shmobile_suspend_init(void) { return 0; }
+static inline void shmobile_smp_apmu_suspend_init(void) { return 0; }
#endif
#ifdef CONFIG_CPU_IDLE
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 8cb641c..c64fc12 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -7,15 +7,19 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/smp.h>
+#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/proc-fns.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include <mach/common.h>
static struct {
@@ -141,7 +145,7 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
return apmu_wrap(cpu, apmu_power_on);
}
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
/* nicked from arch/arm/mach-exynos/hotplug.c */
static inline void cpu_enter_lowpower_a15(void)
{
@@ -172,16 +176,40 @@ static inline void cpu_enter_lowpower_a15(void)
dsb();
}
-void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
{
- /* For this particular CPU deregister boot vector */
- shmobile_smp_hook(cpu, 0, 0);
/* Select next sleep mode using the APMU */
apmu_wrap(cpu, apmu_power_off);
/* Do ARM specific CPU shutdown */
cpu_enter_lowpower_a15();
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+#endif
+
+#if defined(CONFIG_HOTPLUG_CPU)
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+ /* For this particular CPU deregister boot vector */
+ shmobile_smp_hook(cpu, 0, 0);
+
+ /* Shutdown CPU core */
+ shmobile_smp_apmu_cpu_shutdown(cpu);
/* jump to shared mach-shmobile sleep / reset code */
shmobile_smp_sleep();
@@ -192,3 +220,27 @@ int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
return apmu_wrap(cpu, apmu_power_off_poll);
}
#endif
+
+#if defined(CONFIG_SUSPEND)
+static int shmobile_smp_apmu_do_suspend(unsigned long cpu)
+{
+ shmobile_smp_hook(cpu, virt_to_phys(cpu_resume), 0);
+ shmobile_smp_apmu_cpu_shutdown(cpu);
+ cpu_do_idle(); /* WFI selects Core Standby */
+ return 1;
+}
+
+static int shmobile_smp_apmu_enter_suspend(suspend_state_t state)
+{
+ cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend);
+ cpu_leave_lowpower();
+ return 0;
+}
+
+void shmobile_smp_apmu_suspend_init(void)
+{
+ shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend;
+}
+#else
+void shmobile_smp_apmu_suspend_init(void) {}
+#endif
--
1.7.9.5
reply other threads:[~2014-05-29 7:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5386E0AB.9010906@renesas.com \
--to=keita.kobayashi.ym@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.