All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gioh Kim <gioh.kim@lge.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
	"Rik van Riel" <riel@redhat.com>,
	"Johannes Weiner" <hannes@cmpxchg.org>,
	"Mel Gorman" <mgorman@suse.de>,
	"Laura Abbott" <lauraa@codeaurora.org>,
	"Minchan Kim" <minchan@kernel.org>,
	"Heesub Shin" <heesub.shin@samsung.com>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Michal Nazarewicz" <mina86@mina86.com>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	"Linux Memory Management List" <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>, 이건호 <gunho.lee@lge.com>
Subject: Re: [PATCH v2 2/3] CMA: aggressively allocate the pages on cma reserved memory when not used
Date: Mon, 02 Jun 2014 16:13:19 +0900	[thread overview]
Message-ID: <538C240F.60501@lge.com> (raw)
In-Reply-To: <20140602062344.GB7713@js1304-P5Q-DELUXE>

I'm not sure what I'm doing wrong.
These are my code.

  770 #ifdef CONFIG_CMA
  771 void adjust_managed_cma_page_count(struct zone *zone, long count)
  772 {
  773         unsigned long flags;
  774         long total, cma, movable;
  775
  776         spin_lock_irqsave(&zone->lock, flags);
  777
  778         zone->managed_cma_pages += count;
  779
  780         total = zone->managed_pages;
  781         cma = zone->managed_cma_pages;
  782         movable = total - cma - high_wmark_pages(zone);
  783
  784         printk("count=%ld total=%ld cma=%ld movable=%ld\n",
  785                count, total, cma, movable);
  786


2014-06-02 i??i?? 3:23, Joonsoo Kim i?' e,?:
> On Mon, Jun 02, 2014 at 02:54:30PM +0900, Gioh Kim wrote:
>> I found 2 problems at my platform.
>>
>> 1st is occured when I set CMA size 528MB and total memory is 960MB.
>> I print some values in adjust_managed_cma_page_count(),
>> the total value becomes 105439 and cma value 131072.
>> Finally movable value becomes negative value.
>>
>> The total value 105439 means 411MB.
>> Is the zone->managed_pages value pages amount except the CMA?
>> I think zone->managed_pages value is including CMA size but it's value is strange.
>
> Hmm...
> zone->managed_pages includes nr of CMA pages.
> Is there any mistake about your printk?
>
>>
>> 2nd is a kernel panic at __netdev_alloc_skb().
>> I'm not sure it is caused by the CMA.
>> I'm checking it again and going to send you another report with detail call-stacks.
>
> Okay.
>
> Thanks.
>
>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Gioh Kim <gioh.kim@lge.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
	"Rik van Riel" <riel@redhat.com>,
	"Johannes Weiner" <hannes@cmpxchg.org>,
	"Mel Gorman" <mgorman@suse.de>,
	"Laura Abbott" <lauraa@codeaurora.org>,
	"Minchan Kim" <minchan@kernel.org>,
	"Heesub Shin" <heesub.shin@samsung.com>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Michal Nazarewicz" <mina86@mina86.com>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	"Linux Memory Management List" <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>, 이건호 <gunho.lee@lge.com>
Subject: Re: [PATCH v2 2/3] CMA: aggressively allocate the pages on cma reserved memory when not used
Date: Mon, 02 Jun 2014 16:13:19 +0900	[thread overview]
Message-ID: <538C240F.60501@lge.com> (raw)
In-Reply-To: <20140602062344.GB7713@js1304-P5Q-DELUXE>

I'm not sure what I'm doing wrong.
These are my code.

  770 #ifdef CONFIG_CMA
  771 void adjust_managed_cma_page_count(struct zone *zone, long count)
  772 {
  773         unsigned long flags;
  774         long total, cma, movable;
  775
  776         spin_lock_irqsave(&zone->lock, flags);
  777
  778         zone->managed_cma_pages += count;
  779
  780         total = zone->managed_pages;
  781         cma = zone->managed_cma_pages;
  782         movable = total - cma - high_wmark_pages(zone);
  783
  784         printk("count=%ld total=%ld cma=%ld movable=%ld\n",
  785                count, total, cma, movable);
  786


2014-06-02 오후 3:23, Joonsoo Kim 쓴 글:
> On Mon, Jun 02, 2014 at 02:54:30PM +0900, Gioh Kim wrote:
>> I found 2 problems at my platform.
>>
>> 1st is occured when I set CMA size 528MB and total memory is 960MB.
>> I print some values in adjust_managed_cma_page_count(),
>> the total value becomes 105439 and cma value 131072.
>> Finally movable value becomes negative value.
>>
>> The total value 105439 means 411MB.
>> Is the zone->managed_pages value pages amount except the CMA?
>> I think zone->managed_pages value is including CMA size but it's value is strange.
>
> Hmm...
> zone->managed_pages includes nr of CMA pages.
> Is there any mistake about your printk?
>
>>
>> 2nd is a kernel panic at __netdev_alloc_skb().
>> I'm not sure it is caused by the CMA.
>> I'm checking it again and going to send you another report with detail call-stacks.
>
> Okay.
>
> Thanks.
>
>

  reply	other threads:[~2014-06-02  7:13 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-28  7:04 [PATCH v2 0/3] Aggressively allocate the pages on cma reserved memory Joonsoo Kim
2014-05-28  7:04 ` Joonsoo Kim
2014-05-28  7:04 ` [PATCH v2 1/3] CMA: remove redundant retrying code in __alloc_contig_migrate_range Joonsoo Kim
2014-05-28  7:04   ` Joonsoo Kim
2014-05-28  7:04 ` [PATCH v2 2/3] CMA: aggressively allocate the pages on cma reserved memory when not used Joonsoo Kim
2014-05-28  7:04   ` Joonsoo Kim
2014-05-29  7:24   ` Gioh Kim
2014-05-29  7:24     ` Gioh Kim
2014-05-29  7:48     ` Joonsoo Kim
2014-05-29  7:48       ` Joonsoo Kim
2014-05-29  8:09       ` Gioh Kim
2014-05-29  8:09         ` Gioh Kim
2014-05-30  0:45         ` Joonsoo Kim
2014-05-30  0:45           ` Joonsoo Kim
2014-05-31  0:02           ` Michal Nazarewicz
2014-05-31  0:02             ` Michal Nazarewicz
2014-06-02  6:17             ` Joonsoo Kim
2014-06-02  6:17               ` Joonsoo Kim
2014-05-30  7:53   ` Gioh Kim
2014-05-30  7:53     ` Gioh Kim
2014-05-30 14:23     ` Joonsoo Kim
2014-05-30 14:23       ` Joonsoo Kim
2014-06-02  5:54       ` Gioh Kim
2014-06-02  5:54         ` Gioh Kim
2014-06-02  6:23         ` Joonsoo Kim
2014-06-02  6:23           ` Joonsoo Kim
2014-06-02  7:13           ` Gioh Kim [this message]
2014-06-02  7:13             ` Gioh Kim
2014-05-31  0:11   ` Michal Nazarewicz
2014-05-31  0:11     ` Michal Nazarewicz
2014-10-30 10:37   ` Hui Zhu
2014-10-30 10:37     ` Hui Zhu
     [not found]   ` <CADtm3G5Cb2vzVo61qDJ7-1ZNzQ2zOisfjb7GiFXvZR0ocKZy0A@mail.gmail.com>
2015-01-06  4:01     ` Gregory Fong
2015-01-06  4:01       ` Gregory Fong
2015-01-06  8:23       ` Joonsoo Kim
2015-01-06  8:23         ` Joonsoo Kim
2014-05-28  7:04 ` [PATCH v2 3/3] CMA: always treat free cma pages as non-free on watermark checking Joonsoo Kim
2014-05-28  7:04   ` Joonsoo Kim
2014-05-30 10:40   ` Ritesh Harjani
2014-05-30 10:40     ` Ritesh Harjani
2014-05-30 14:46     ` Joonsoo Kim
2014-05-30 14:46       ` Joonsoo Kim
2014-06-02  4:07       ` Ritesh Harjani
2014-06-02  4:07         ` Ritesh Harjani
2014-06-02 10:47         ` Bartlomiej Zolnierkiewicz
2014-06-02 10:47           ` Bartlomiej Zolnierkiewicz
2014-06-02 14:05           ` Joonsoo Kim
2014-06-02 14:05             ` Joonsoo Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=538C240F.60501@lge.com \
    --to=gioh.kim@lge.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=gunho.lee@lge.com \
    --cc=hannes@cmpxchg.org \
    --cc=heesub.shin@samsung.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=lauraa@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mgorman@suse.de \
    --cc=mina86@mina86.com \
    --cc=minchan@kernel.org \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.