From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Lifshitz Subject: Re: OMAP baseline test results for v3.15-rc8 Date: Mon, 02 Jun 2014 11:45:47 +0300 Message-ID: <538C39BB.9020809@compulab.co.il> References: Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------080308020107020906030006" Return-path: Received: from softlayer.compulab.co.il ([50.23.254.55]:43202 "EHLO compulab.co.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751442AbaFBIp4 (ORCPT ); Mon, 2 Jun 2014 04:45:56 -0400 In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Paul Walmsley Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel-build-reports@lists.infradead.org This is a multi-part message in MIME format. --------------080308020107020906030006 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Paul, CM-T3517 is a bare-bone CoM without MMC/SD card slot (NAND option). MMC/SD card interface (and some other peripherals) are properties of the carrier base board SB-T35, which turns this CoM into fully functional board SBC-T3517. Please, use omap3-sbc-t3517.dtb target. Attached Linux v3.15-rc8 boot log using omap2plus_defconfig. On 06/02/2014 10:50 AM, Paul Walmsley wrote: > > Boot to userspace: > FAIL ( 2/13): 2430sdp, cmt3517 > skip ( 2/13): 5912osk, 4460varsomom > Pass ( 9/13): 2420n800, 3517evm, 3530es3beagle, 3730beaglexm, > 37xxevm, 4430es2panda, 4460pandaes, am335xbone, > am335xbonelt > > Regards, Dmitry --------------080308020107020906030006 Content-Type: text/plain; charset=UTF-8; name="sbc_t3517_log_mmc_boot.txt" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="sbc_t3517_log_mmc_boot.txt" U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.2 Die ID #7a64000100000000016b29c60d00c020 Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 0 CM-T3517 # sete bootargs 'console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt' CM-T3517 # sete bootcmd 'tftp 0x82000000 uImage-cm-t3517_wdt.bin && bootm 0x82000000' CM-T3517 # boot Using DaVinci EMAC device TFTP from server 192.168.11.10; our IP address is 192.168.6.204 Filename 'uImage-cm-t3517_wdt.bin'. Load address: 0x82000000 Loading: ################################################################# ################################################################# ################################################T ################# ################################################################# ################################################################# ##########################################T ####################### ################################################################# ######T ########################################################### ###################################T ############################## ################################################################T # ################################################################# #############################T #################################### ##########################################################T ####### ################################################################# ###################### done Bytes transferred = 4769379 (48c663 hex) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4769315 Bytes = 4.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.0-rc8 (lifshitz@compulab.co.il) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #4 SMP Mon Jun 2 11:19:33 IDT 2014 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c092e8c0, node_mem_map cfcf2000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @cfcaf000 s14080 r8192 d14592 u36864 [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 227188K/261120K available (6111K kernel code, 664K rwdata, 2216K rodata, 393K init, 5522K bss, 33932K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0829e10 (8328 kB) [ 0.000000] .init : 0xc082a000 - 0xc088c700 ( 394 kB) [ 0.000000] .data : 0xc088e000 - 0xc09340c0 ( 665 kB) [ 0.000000] .bss : 0xc09340c0 - 0xc0e98c48 (5523 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000033] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000144] OMAP clocksource: timer1 at 13000000 Hz [ 0.001575] Console: colour dummy device 80x30 [ 0.001674] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001693] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001708] ... MAX_LOCK_DEPTH: 48 [ 0.001722] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001736] ... CLASSHASH_SIZE: 4096 [ 0.001750] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001764] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001777] ... CHAINHASH_SIZE: 16384 [ 0.001792] memory used by lock dependency info: 3695 kB [ 0.001806] per task-struct memory footprint: 1152 bytes [ 0.001885] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.106203] pid_max: default: 32768 minimum: 301 [ 0.106962] Security Framework initialized [ 0.107205] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.107234] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111655] CPU: Testing write buffer coherency: ok [ 0.113814] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.113955] Setting up static identity map for 0x805c88c8 - 0x805c8938 [ 0.120143] Brought up 1 CPUs [ 0.120176] SMP: Total of 1 processors activated. [ 0.120194] CPU: All CPU(s) started in SVC mode. [ 0.125353] devtmpfs: initialized [ 0.139166] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.213542] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.215672] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.294681] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.314698] pinctrl core: initialized pinctrl subsystem [ 0.319801] regulator-dummy: no parameters [ 0.418889] NET: Registered protocol family 16 [ 0.429888] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.434387] In-band Error seen by USB_OTG at address 0 [ 0.434417] ------------[ cut here ]------------ [ 0.434469] WARNING: CPU: 0 PID: 1 at /home/lifshitz/workroot/git-repo/linux-cm-t3x/drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0x100/0x128() [ 0.434487] Modules linked in: [ 0.434524] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8 #4 [ 0.434586] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.434625] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 0.434661] [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x8c) [ 0.434691] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.434720] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0x100/0x128) [ 0.434760] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x58/0x20c) [ 0.434789] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.434821] [] (handle_irq_event) from [] (handle_level_irq+0xac/0x148) [ 0.434849] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.434879] [] (generic_handle_irq) from [] (handle_IRQ+0x4c/0xac) [ 0.434906] [] (handle_IRQ) from [] (omap3_intc_handle_irq+0x80/0x9c) [ 0.434933] [] (omap3_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.434953] Exception stack(0xce055d68 to 0xce055db0) [ 0.434978] 5d60: 00030b84 ce053070 00000000 ce052b00 60000153 ce005454 [ 0.435002] 5d80: ce005454 00000021 0000001a ce005434 60000153 00000000 00000000 ce055db0 [ 0.435021] 5da0: 00030b85 c05c25a0 20000153 ffffffff [ 0.435058] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.435089] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x2d8/0x4c0) [ 0.435118] [] (__setup_irq) from [] (request_threaded_irq+0xb8/0x13c) [ 0.435154] [] (request_threaded_irq) from [] (omap3_l3_probe+0x10c/0x16c) [ 0.435195] [] (omap3_l3_probe) from [] (platform_drv_probe+0x18/0x48) [ 0.435225] [] (platform_drv_probe) from [] (really_probe+0x78/0x218) [ 0.435254] [] (really_probe) from [] (driver_probe_device+0x30/0x48) [ 0.435280] [] (driver_probe_device) from [] (__driver_attach+0x94/0x98) [ 0.435306] [] (__driver_attach) from [] (bus_for_each_dev+0x54/0x88) [ 0.435332] [] (bus_for_each_dev) from [] (bus_add_driver+0xdc/0x1d4) [ 0.435359] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 0.435386] [] (driver_register) from [] (platform_driver_probe+0x20/0xa4) [ 0.435415] [] (platform_driver_probe) from [] (do_one_initcall+0x34/0x160) [ 0.435449] [] (do_one_initcall) from [] (do_basic_setup+0x90/0xc8) [ 0.435477] [] (do_basic_setup) from [] (kernel_init_freeable+0x74/0x110) [ 0.435510] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.435537] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.435803] ---[ end trace 06d1ca61a08dd8b8 ]--- [ 0.448829] Reprogramming SDRC clock to 332000000 Hz [ 0.453158] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.464408] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.465960] OMAP GPIO hardware version 2.5 [ 0.468276] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.471524] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.474778] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.478038] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.481191] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.496039] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.497128] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.509289] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.512135] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.667512] No ATAGs? [ 0.667564] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.672304] OMAP DMA hardware revision 4.0 [ 0.712718] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.712847] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.780155] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.781570] of_get_named_gpiod_flags: can't parse gpios property of node '/hsusb1_power_reg[0]' [ 0.782713] hsusb1_vbus: 3300 mV [ 0.783396] of_get_named_gpiod_flags: can't parse gpios property of node '/hsusb2_power_reg[0]' [ 0.784100] hsusb2_vbus: 3300 mV [ 0.784742] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vmmc[0]' [ 0.785406] vmmc: 3300 mV [ 0.786167] reg-fixed-voltage wl12xx_vmmc2.8: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.786360] platform wl12xx_vmmc2.8: Driver reg-fixed-voltage requests probe deferral [ 0.786604] of_get_named_gpiod_flags: can't parse gpios property of node '/wl12xx_vaux2[0]' [ 0.787360] vwl1271_vaux2: 1800 mV [ 0.787989] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vddvario-sb-t35[0]' [ 0.788641] vddvario: no parameters [ 0.789171] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a-sb-t35[0]' [ 0.789808] vdd33a: no parameters [ 0.796762] SCSI subsystem initialized [ 0.798296] usbcore: registered new interface driver usbfs [ 0.798632] usbcore: registered new interface driver hub [ 0.799376] usbcore: registered new device driver usb [ 0.800027] usb_phy_gen_xceiv hsusb1_phy.5: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.800097] platform hsusb1_phy.5: Driver usb_phy_gen_xceiv requests probe deferral [ 0.800234] usb_phy_gen_xceiv hsusb2_phy.6: could not find pctldev for node /ocp/pinmux@48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.800286] platform hsusb2_phy.6: Driver usb_phy_gen_xceiv requests probe deferral [ 0.804125] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 0.806475] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.808303] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 0.816220] Switched to clocksource timer1 [ 1.114162] NET: Registered protocol family 2 [ 1.117580] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.117847] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.119015] TCP: Hash tables configured (established 2048 bind 2048) [ 1.119376] TCP: reno registered [ 1.119431] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.119760] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.121593] NET: Registered protocol family 1 [ 1.125013] RPC: Registered named UNIX socket transport module. [ 1.125052] RPC: Registered udp transport module. [ 1.125073] RPC: Registered tcp transport module. [ 1.125091] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.127629] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.137137] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.378968] VFS: Disk quotas dquot_6.5.2 [ 1.379206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.382752] NFS: Registering the id_resolver key type [ 1.383492] Key type id_resolver registered [ 1.383529] Key type id_legacy registered [ 1.383737] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.384583] msgmni has been set to 475 [ 1.395561] io scheduler noop registered [ 1.395603] io scheduler deadline registered [ 1.395751] io scheduler cfq registered (default) [ 1.401578] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.402477] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.407239] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV [ 1.409639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.423830] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.423896] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 1.427808] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.431028] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.431087] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.432632] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.434973] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.435029] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@49020000[0]' [ 1.437090] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.756411] console [ttyO2] enabled [ 2.815596] brd: module loaded [ 2.849957] loop: module loaded [ 2.858675] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.064914] libphy: smsc911x-mdio: probed [ 3.146917] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.159520] smsc911x 2d000000.ethernet eth0: MAC Address: 36:94:5b:1b:64:70 [ 3.216032] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.222557] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.233324] libphy: davinci_mdio.0: probed [ 3.237857] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.246535] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.256506] usbcore: registered new interface driver asix [ 3.262425] usbcore: registered new interface driver ax88179_178a [ 3.269147] usbcore: registered new interface driver cdc_ether [ 3.275616] usbcore: registered new interface driver smsc95xx [ 3.281954] usbcore: registered new interface driver net1080 [ 3.288192] usbcore: registered new interface driver cdc_subset [ 3.294627] usbcore: registered new interface driver zaurus [ 3.300910] usbcore: registered new interface driver cdc_ncm [ 3.309776] usbcore: registered new interface driver cdc_wdm [ 3.316300] usbcore: registered new interface driver usb-storage [ 3.322942] usbcore: registered new interface driver usbtest [ 3.332885] mousedev: PS/2 mouse device common for all mice [ 3.344451] spi1.0 supply vcc not found, using dummy regulator [ 3.353902] ads7846 spi1.0: touchscreen, irq 169 [ 3.361909] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input0 [ 3.383110] i2c /dev entries driver [ 3.392899] Driver for 1-wire Dallas network protocol. [ 3.407144] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.417626] of_get_named_gpiod_flags exited with status 0 [ 3.423356] of_get_named_gpiod_flags exited with status 0 [ 3.466861] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.476164] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.486326] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.494138] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.503138] usbcore: registered new interface driver usbhid [ 3.509126] usbhid: USB HID core driver [ 3.515226] oprofile: using arm/armv7 [ 3.520174] TCP: cubic registered [ 3.523679] Initializing XFRM netlink socket [ 3.528495] NET: Registered protocol family 17 [ 3.533298] NET: Registered protocol family 15 [ 3.538631] Key type dns_resolver registered [ 3.545290] PM: no software I/O chain control; some wakeups may be lost [ 3.552883] ThumbEE CPU extension supported. [ 3.557542] Registering SWP/SWPB emulation handler [ 3.576523] vwl1271_vaux2: disabling [ 3.580320] vmmc: disabling [ 3.583267] hsusb2_vbus: disabling [ 3.587002] hsusb1_vbus: disabling [ 3.593871] of_get_named_gpiod_flags exited with status 0 [ 3.601214] vw1271: 1800 mV [ 3.605733] of_get_named_gpiod_flags exited with status 0 [ 3.613238] of_get_named_gpiod_flags exited with status 0 [ 3.620577] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.629852] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 3.741010] /home/lifshitz/workroot/git-repo/linux-cm-t3x/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.835073] Waiting for root device /dev/mmcblk0p2... [ 3.847356] omap_hsmmc 480b4000.mmc: card claims to support voltages below defined range [ 3.871505] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.881628] mmc1: new SDIO card at address 0001 [ 17.337245] mmc0: new SDHC card at address e624 [ 17.346375] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 17.367618] mmcblk0: p1 p2 [ 17.482047] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 17.496648] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 17.540713] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 17.549636] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 17.561280] devtmpfs: mounted [ 17.565783] Freeing unused kernel memory: 392K (c082a000 - c088c000) /bin/sh: can't access tty; job control turned off # ls bin dev home media opt root selinux sys usr boot etc lib mnt proc sbin srv tmp var # --------------080308020107020906030006-- From mboxrd@z Thu Jan 1 00:00:00 1970 From: lifshitz@compulab.co.il (Dmitry Lifshitz) Date: Mon, 02 Jun 2014 11:45:47 +0300 Subject: OMAP baseline test results for v3.15-rc8 In-Reply-To: References: Message-ID: <538C39BB.9020809@compulab.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Paul, CM-T3517 is a bare-bone CoM without MMC/SD card slot (NAND option). MMC/SD card interface (and some other peripherals) are properties of the carrier base board SB-T35, which turns this CoM into fully functional board SBC-T3517. Please, use omap3-sbc-t3517.dtb target. Attached Linux v3.15-rc8 boot log using omap2plus_defconfig. On 06/02/2014 10:50 AM, Paul Walmsley wrote: > > Boot to userspace: > FAIL ( 2/13): 2430sdp, cmt3517 > skip ( 2/13): 5912osk, 4460varsomom > Pass ( 9/13): 2420n800, 3517evm, 3530es3beagle, 3730beaglexm, > 37xxevm, 4430es2panda, 4460pandaes, am335xbone, > am335xbonelt > > Regards, Dmitry -------------- next part -------------- U-Boot 2009.11-cm-t3517-1 (Dec 10 2010 - 23:25:02) AM35xx-GP ES2.0, L3-165MHz CM-T3517 Module + LPDDR/NAND 128/512M I2C: ready DRAM: 256 MB NAND: 512 MiB In: serial Out: serial Err: serial PCB: 1.2 Die ID #7a64000100000000016b29c60d00c020 Net: DaVinci EMAC, smc911x-0 Hit any key to stop autoboot: 0 CM-T3517 # sete bootargs 'console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt' CM-T3517 # sete bootcmd 'tftp 0x82000000 uImage-cm-t3517_wdt.bin && bootm 0x82000000' CM-T3517 # boot Using DaVinci EMAC device TFTP from server 192.168.11.10; our IP address is 192.168.6.204 Filename 'uImage-cm-t3517_wdt.bin'. Load address: 0x82000000 Loading: ################################################################# ################################################################# ################################################T ################# ################################################################# ################################################################# ##########################################T ####################### ################################################################# ######T ########################################################### ###################################T ############################## ################################################################T # ################################################################# #############################T #################################### ##########################################################T ####### ################################################################# ###################### done Bytes transferred = 4769379 (48c663 hex) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4769315 Bytes = 4.5 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.15.0-rc8 (lifshitz at compulab.co.il) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) ) #4 SMP Mon Jun 2 11:19:33 IDT 2014 [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: CompuLab SBC-T3517 with CM-T3517 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c092e8c0, node_mem_map cfcf2000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM3517 ES1.1 (l2cache sgx neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @cfcaf000 s14080 r8192 d14592 u36864 [ 0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO2,115200n8 debug ignore_loglevel earlyprintk root=/dev/mmcblk0p2 rootwait init=/bin/sh nohlt [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 227188K/261120K available (6111K kernel code, 664K rwdata, 2216K rodata, 393K init, 5522K bss, 33932K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0829e10 (8328 kB) [ 0.000000] .init : 0xc082a000 - 0xc088c700 ( 394 kB) [ 0.000000] .data : 0xc088e000 - 0xc09340c0 ( 665 kB) [ 0.000000] .bss : 0xc09340c0 - 0xc0e98c48 (5523 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer2 at 13000000 Hz [ 0.000033] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns [ 0.000144] OMAP clocksource: timer1 at 13000000 Hz [ 0.001575] Console: colour dummy device 80x30 [ 0.001674] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001693] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001708] ... MAX_LOCK_DEPTH: 48 [ 0.001722] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001736] ... CLASSHASH_SIZE: 4096 [ 0.001750] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001764] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001777] ... CHAINHASH_SIZE: 16384 [ 0.001792] memory used by lock dependency info: 3695 kB [ 0.001806] per task-struct memory footprint: 1152 bytes [ 0.001885] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.106203] pid_max: default: 32768 minimum: 301 [ 0.106962] Security Framework initialized [ 0.107205] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.107234] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.111655] CPU: Testing write buffer coherency: ok [ 0.113814] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.113955] Setting up static identity map for 0x805c88c8 - 0x805c8938 [ 0.120143] Brought up 1 CPUs [ 0.120176] SMP: Total of 1 processors activated. [ 0.120194] CPU: All CPU(s) started in SVC mode. [ 0.125353] devtmpfs: initialized [ 0.139166] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.213542] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.215672] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.294681] omap_hwmod: uart4: cannot be enabled for reset (3) [ 0.314698] pinctrl core: initialized pinctrl subsystem [ 0.319801] regulator-dummy: no parameters [ 0.418889] NET: Registered protocol family 16 [ 0.429888] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.434387] In-band Error seen by USB_OTG at address 0 [ 0.434417] ------------[ cut here ]------------ [ 0.434469] WARNING: CPU: 0 PID: 1 at /home/lifshitz/workroot/git-repo/linux-cm-t3x/drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0x100/0x128() [ 0.434487] Modules linked in: [ 0.434524] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8 #4 [ 0.434586] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.434625] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 0.434661] [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x8c) [ 0.434691] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 0.434720] [] (warn_slowpath_null) from [] (omap3_l3_app_irq+0x100/0x128) [ 0.434760] [] (omap3_l3_app_irq) from [] (handle_irq_event_percpu+0x58/0x20c) [ 0.434789] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 0.434821] [] (handle_irq_event) from [] (handle_level_irq+0xac/0x148) [ 0.434849] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x30) [ 0.434879] [] (generic_handle_irq) from [] (handle_IRQ+0x4c/0xac) [ 0.434906] [] (handle_IRQ) from [] (omap3_intc_handle_irq+0x80/0x9c) [ 0.434933] [] (omap3_intc_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 0.434953] Exception stack(0xce055d68 to 0xce055db0) [ 0.434978] 5d60: 00030b84 ce053070 00000000 ce052b00 60000153 ce005454 [ 0.435002] 5d80: ce005454 00000021 0000001a ce005434 60000153 00000000 00000000 ce055db0 [ 0.435021] 5da0: 00030b85 c05c25a0 20000153 ffffffff [ 0.435058] [] (__irq_svc) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 0.435089] [] (_raw_spin_unlock_irqrestore) from [] (__setup_irq+0x2d8/0x4c0) [ 0.435118] [] (__setup_irq) from [] (request_threaded_irq+0xb8/0x13c) [ 0.435154] [] (request_threaded_irq) from [] (omap3_l3_probe+0x10c/0x16c) [ 0.435195] [] (omap3_l3_probe) from [] (platform_drv_probe+0x18/0x48) [ 0.435225] [] (platform_drv_probe) from [] (really_probe+0x78/0x218) [ 0.435254] [] (really_probe) from [] (driver_probe_device+0x30/0x48) [ 0.435280] [] (driver_probe_device) from [] (__driver_attach+0x94/0x98) [ 0.435306] [] (__driver_attach) from [] (bus_for_each_dev+0x54/0x88) [ 0.435332] [] (bus_for_each_dev) from [] (bus_add_driver+0xdc/0x1d4) [ 0.435359] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 0.435386] [] (driver_register) from [] (platform_driver_probe+0x20/0xa4) [ 0.435415] [] (platform_driver_probe) from [] (do_one_initcall+0x34/0x160) [ 0.435449] [] (do_one_initcall) from [] (do_basic_setup+0x90/0xc8) [ 0.435477] [] (do_basic_setup) from [] (kernel_init_freeable+0x74/0x110) [ 0.435510] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 0.435537] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.435803] ---[ end trace 06d1ca61a08dd8b8 ]--- [ 0.448829] Reprogramming SDRC clock to 332000000 Hz [ 0.453158] platform 480c5000.aes: Cannot lookup hwmod 'aes' [ 0.464408] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.465960] OMAP GPIO hardware version 2.5 [ 0.468276] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.471524] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.474778] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.478038] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.481191] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.496039] platform 480c3000.sham: Cannot lookup hwmod 'sham' [ 0.497128] platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core' [ 0.509289] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.512135] platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs' [ 0.667512] No ATAGs? [ 0.667564] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.672304] OMAP DMA hardware revision 4.0 [ 0.712718] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.712847] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.780155] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 0.781570] of_get_named_gpiod_flags: can't parse gpios property of node '/hsusb1_power_reg[0]' [ 0.782713] hsusb1_vbus: 3300 mV [ 0.783396] of_get_named_gpiod_flags: can't parse gpios property of node '/hsusb2_power_reg[0]' [ 0.784100] hsusb2_vbus: 3300 mV [ 0.784742] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vmmc[0]' [ 0.785406] vmmc: 3300 mV [ 0.786167] reg-fixed-voltage wl12xx_vmmc2.8: could not find pctldev for node /ocp/pinmux at 48002a00/pinmux_wl12xx_wkup_pins, deferring probe [ 0.786360] platform wl12xx_vmmc2.8: Driver reg-fixed-voltage requests probe deferral [ 0.786604] of_get_named_gpiod_flags: can't parse gpios property of node '/wl12xx_vaux2[0]' [ 0.787360] vwl1271_vaux2: 1800 mV [ 0.787989] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vddvario-sb-t35[0]' [ 0.788641] vddvario: no parameters [ 0.789171] of_get_named_gpiod_flags: can't parse gpios property of node '/regulator-vdd33a-sb-t35[0]' [ 0.789808] vdd33a: no parameters [ 0.796762] SCSI subsystem initialized [ 0.798296] usbcore: registered new interface driver usbfs [ 0.798632] usbcore: registered new interface driver hub [ 0.799376] usbcore: registered new device driver usb [ 0.800027] usb_phy_gen_xceiv hsusb1_phy.5: could not find pctldev for node /ocp/pinmux at 48002030/pinmux_hsusb1_phy_reset_pins, deferring probe [ 0.800097] platform hsusb1_phy.5: Driver usb_phy_gen_xceiv requests probe deferral [ 0.800234] usb_phy_gen_xceiv hsusb2_phy.6: could not find pctldev for node /ocp/pinmux at 48002030/pinmux_hsusb2_phy_reset_pins, deferring probe [ 0.800286] platform hsusb2_phy.6: Driver usb_phy_gen_xceiv requests probe deferral [ 0.804125] omap_i2c 48070000.i2c: bus 0 rev3.3 at 400 kHz [ 0.806475] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.808303] omap_i2c 48060000.i2c: bus 2 rev3.3 at 400 kHz [ 0.816220] Switched to clocksource timer1 [ 1.114162] NET: Registered protocol family 2 [ 1.117580] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 1.117847] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 1.119015] TCP: Hash tables configured (established 2048 bind 2048) [ 1.119376] TCP: reno registered [ 1.119431] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.119760] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.121593] NET: Registered protocol family 1 [ 1.125013] RPC: Registered named UNIX socket transport module. [ 1.125052] RPC: Registered udp transport module. [ 1.125073] RPC: Registered tcp transport module. [ 1.125091] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.127629] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 1.137137] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.378968] VFS: Disk quotas dquot_6.5.2 [ 1.379206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.382752] NFS: Registering the id_resolver key type [ 1.383492] Key type id_resolver registered [ 1.383529] Key type id_legacy registered [ 1.383737] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. [ 1.384583] msgmni has been set to 475 [ 1.395561] io scheduler noop registered [ 1.395603] io scheduler deadline registered [ 1.395751] io scheduler cfq registered (default) [ 1.401578] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568 [ 1.402477] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 1.407239] pbias_mmc_omap2430: 1800 <--> 3000 mV at 3000 mV [ 1.409639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.423830] omap_uart 4806a000.serial: no wakeirq for uart0 [ 1.423896] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806a000[0]' [ 1.427808] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.431028] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.431087] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 4806c000[0]' [ 1.432632] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.434973] omap_uart 49020000.serial: no wakeirq for uart0 [ 1.435029] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 49020000[0]' [ 1.437090] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 2.756411] console [ttyO2] enabled [ 2.815596] brd: module loaded [ 2.849957] loop: module loaded [ 2.858675] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.064914] libphy: smsc911x-mdio: probed [ 3.146917] smsc911x 2d000000.ethernet eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=2d000000.etherne:01, irq=-1) [ 3.159520] smsc911x 2d000000.ethernet eth0: MAC Address: 36:94:5b:1b:64:70 [ 3.216032] davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 [ 3.222557] davinci_mdio davinci_mdio.0: detected phy mask fffffffc [ 3.233324] libphy: davinci_mdio.0: probed [ 3.237857] davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio.0:00, driver unknown [ 3.246535] davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio.0:01, driver unknown [ 3.256506] usbcore: registered new interface driver asix [ 3.262425] usbcore: registered new interface driver ax88179_178a [ 3.269147] usbcore: registered new interface driver cdc_ether [ 3.275616] usbcore: registered new interface driver smsc95xx [ 3.281954] usbcore: registered new interface driver net1080 [ 3.288192] usbcore: registered new interface driver cdc_subset [ 3.294627] usbcore: registered new interface driver zaurus [ 3.300910] usbcore: registered new interface driver cdc_ncm [ 3.309776] usbcore: registered new interface driver cdc_wdm [ 3.316300] usbcore: registered new interface driver usb-storage [ 3.322942] usbcore: registered new interface driver usbtest [ 3.332885] mousedev: PS/2 mouse device common for all mice [ 3.344451] spi1.0 supply vcc not found, using dummy regulator [ 3.353902] ads7846 spi1.0: touchscreen, irq 169 [ 3.361909] input: ADS7846 Touchscreen as /devices/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input0 [ 3.383110] i2c /dev entries driver [ 3.392899] Driver for 1-wire Dallas network protocol. [ 3.407144] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.417626] of_get_named_gpiod_flags exited with status 0 [ 3.423356] of_get_named_gpiod_flags exited with status 0 [ 3.466861] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' [ 3.476164] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' [ 3.486326] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 3.494138] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 3.503138] usbcore: registered new interface driver usbhid [ 3.509126] usbhid: USB HID core driver [ 3.515226] oprofile: using arm/armv7 [ 3.520174] TCP: cubic registered [ 3.523679] Initializing XFRM netlink socket [ 3.528495] NET: Registered protocol family 17 [ 3.533298] NET: Registered protocol family 15 [ 3.538631] Key type dns_resolver registered [ 3.545290] PM: no software I/O chain control; some wakeups may be lost [ 3.552883] ThumbEE CPU extension supported. [ 3.557542] Registering SWP/SWPB emulation handler [ 3.576523] vwl1271_vaux2: disabling [ 3.580320] vmmc: disabling [ 3.583267] hsusb2_vbus: disabling [ 3.587002] hsusb1_vbus: disabling [ 3.593871] of_get_named_gpiod_flags exited with status 0 [ 3.601214] vw1271: 1800 mV [ 3.605733] of_get_named_gpiod_flags exited with status 0 [ 3.613238] of_get_named_gpiod_flags exited with status 0 [ 3.620577] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' [ 3.629852] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 480b4000[0]' [ 3.741010] /home/lifshitz/workroot/git-repo/linux-cm-t3x/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.835073] Waiting for root device /dev/mmcblk0p2... [ 3.847356] omap_hsmmc 480b4000.mmc: card claims to support voltages below defined range [ 3.871505] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.881628] mmc1: new SDIO card at address 0001 [ 17.337245] mmc0: new SDHC card at address e624 [ 17.346375] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 17.367618] mmcblk0: p1 p2 [ 17.482047] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 17.496648] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 17.540713] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 17.549636] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 17.561280] devtmpfs: mounted [ 17.565783] Freeing unused kernel memory: 392K (c082a000 - c088c000) /bin/sh: can't access tty; job control turned off # ls bin dev home media opt root selinux sys usr boot etc lib mnt proc sbin srv tmp var #