From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH v2 6/8] ARM: shmobile: r8a7791/koelsch dts: Add DVFS parameters into cpu0 node for r8a7791
Date: Tue, 03 Jun 2014 12:03:10 +0000 [thread overview]
Message-ID: <538DB97E.1060004@bp.renesas.com> (raw)
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.
- voltage-tolerance = 1%
It reflects the tolerance for the CPU voltage defined inside the OPP
table. Due to the lack of proper OPP definition, use an arbitrary safe
value.
- clock-latency = 300 us
Approximate worst-case latency to do a full DVFS transition for every
OPPs. Due to the lack of HW information, use an arbitrary safe value.
Note: The term transition-latency will be more accurate to define this
value since the clock transition latency is not the only parameter that
will define the overall DVFS transition.
- operating-points = < kHz - uV >
List of 6 operating points. All of them are using the same voltage
since DVS is not supported in R-CAR Gen2.
- clocks
phandle to the CPU clock source. This clock source is used for all the
2 CortexA15 located inside the same cluster.
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
---
Changes since version 1:
- added the setting of VDD.
- fixed subject.
arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
arch/arm/boot/dts/r8a7791.dtsi | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 95331d7..b2e6616 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -429,3 +429,7 @@
regulator-always-on;
};
};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8d7ffae..b9b3c74 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -45,6 +45,17 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
+ voltage-tolerance = <1>; /* 1% */
+ clocks = <&cpg_clocks R8A7791_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
};
cpu1: cpu@1 {
--
1.7.9.5
next reply other threads:[~2014-06-03 12:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-03 12:03 Gaku Inami [this message]
2014-06-04 23:39 ` [PATCH v2 6/8] ARM: shmobile: r8a7791/koelsch dts: Add DVFS parameters into cpu0 node for r8a779 Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=538DB97E.1060004@bp.renesas.com \
--to=gaku.inami.xw@bp.renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.