diff for duplicates of <538F05BC.7000800@ti.com> diff --git a/a/1.txt b/N1/1.txt index 03b1042..a5c7281 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -47,7 +47,8 @@ On Saturday 24 May 2014 03:36 AM, Sergei Shtylyov wrote: > 4 files changed, 356 insertions(+) > > Index: linux-phy/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt -> =================================> --- /dev/null +> =================================================================== +> --- /dev/null > +++ linux-phy/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt > @@ -0,0 +1,60 @@ > +* Renesas R-Car generation 2 USB PHY @@ -121,7 +122,8 @@ PHY specifier (The channel should be configured to a particualr mode in xlate). Btw I'm not sure if it is recommended to pass register mask values from dt. > Index: linux-phy/drivers/phy/Kconfig -> =================================> --- linux-phy.orig/drivers/phy/Kconfig +> =================================================================== +> --- linux-phy.orig/drivers/phy/Kconfig > +++ linux-phy/drivers/phy/Kconfig > @@ -31,6 +31,13 @@ config PHY_MVEBU_SATA > depends on OF @@ -138,7 +140,8 @@ Btw I'm not sure if it is recommended to pass register mask values from dt. > tristate "OMAP CONTROL PHY Driver" > depends on ARCH_OMAP2PLUS || COMPILE_TEST > Index: linux-phy/drivers/phy/Makefile -> =================================> --- linux-phy.orig/drivers/phy/Makefile +> =================================================================== +> --- linux-phy.orig/drivers/phy/Makefile > +++ linux-phy/drivers/phy/Makefile > @@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy- > obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o @@ -149,7 +152,8 @@ Btw I'm not sure if it is recommended to pass register mask values from dt. > obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > Index: linux-phy/drivers/phy/phy-rcar-gen2.c -> =================================> --- /dev/null +> =================================================================== +> --- /dev/null > +++ linux-phy/drivers/phy/phy-rcar-gen2.c > @@ -0,0 +1,288 @@ > +/* diff --git a/a/content_digest b/N1/content_digest index 706eac3..590d852 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,7 +1,7 @@ "ref\0201405240206.04700.sergei.shtylyov@cogentembedded.com\0" "From\0Kishon Vijay Abraham I <kishon@ti.com>\0" "Subject\0Re: [PATCH v4] phy: Renesas R-Car Gen2 PHY driver\0" - "Date\0Wed, 04 Jun 2014 11:52:44 +0000\0" + "Date\0Wed, 4 Jun 2014 17:10:44 +0530\0" "To\0Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>" robh+dt@kernel.org pawel.moll@arm.com @@ -64,7 +64,8 @@ "> 4 files changed, 356 insertions(+)\n" "> \n" "> Index: linux-phy/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt\n" - "> =================================> --- /dev/null\n" + "> ===================================================================\n" + "> --- /dev/null\n" "> +++ linux-phy/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt\n" "> @@ -0,0 +1,60 @@\n" "> +* Renesas R-Car generation 2 USB PHY\n" @@ -138,7 +139,8 @@ "\n" "Btw I'm not sure if it is recommended to pass register mask values from dt.\n" "> Index: linux-phy/drivers/phy/Kconfig\n" - "> =================================> --- linux-phy.orig/drivers/phy/Kconfig\n" + "> ===================================================================\n" + "> --- linux-phy.orig/drivers/phy/Kconfig\n" "> +++ linux-phy/drivers/phy/Kconfig\n" "> @@ -31,6 +31,13 @@ config PHY_MVEBU_SATA\n" "> \tdepends on OF\n" @@ -155,7 +157,8 @@ "> \ttristate \"OMAP CONTROL PHY Driver\"\n" "> \tdepends on ARCH_OMAP2PLUS || COMPILE_TEST\n" "> Index: linux-phy/drivers/phy/Makefile\n" - "> =================================> --- linux-phy.orig/drivers/phy/Makefile\n" + "> ===================================================================\n" + "> --- linux-phy.orig/drivers/phy/Makefile\n" "> +++ linux-phy/drivers/phy/Makefile\n" "> @@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY)\t\t+= phy-\n" "> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)\t+= phy-exynos-dp-video.o\n" @@ -166,7 +169,8 @@ "> obj-$(CONFIG_OMAP_USB2)\t\t\t+= phy-omap-usb2.o\n" "> obj-$(CONFIG_TI_PIPE3)\t\t\t+= phy-ti-pipe3.o\n" "> Index: linux-phy/drivers/phy/phy-rcar-gen2.c\n" - "> =================================> --- /dev/null\n" + "> ===================================================================\n" + "> --- /dev/null\n" "> +++ linux-phy/drivers/phy/phy-rcar-gen2.c\n" "> @@ -0,0 +1,288 @@\n" "> +/*\n" @@ -234,4 +238,4 @@ "Thanks\n" Kishon -4757ea6668b742b8134787051119db40ec73eef5335bded0d1ef22340f59d670 +c02b3d713dcc063f1f3ebac3831d604a94c19073590a75b30fb8e18de7117aa5
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.