From: Wenlin Kang <wenlin.kang@windriver.com>
To: Saul Wold <sgw@linux.intel.com>,
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH] bash: fix to build bash/po/ correctly
Date: Mon, 9 Jun 2014 14:27:20 +0800 [thread overview]
Message-ID: <539553C8.5090803@windriver.com> (raw)
In-Reply-To: <53920437.1070908@linux.intel.com>
On 2014年06月07日 02:11, Saul Wold wrote:
> On 06/04/2014 12:45 AM, Wenlin Kang wrote:
>> There was an ignored error while building bash, causing the po/
>> directory not built out correctly, the log follow:
>> make[1]: *** No rule to make target `/config.status',
>> needed by `Makefile'. Stop.
>> make: [installdirs] Error 2 (ignored)
>>
>> The cause is that some variable,PACKAGE and VERSION don't be defined,
>> and others don't get correct value, eg, top_builddir in po/Makevar,
>> GETTEXT_MACRO_VERSION and MKDIR_P in po/Makefile.in.in and so on.
>>
>> The patch fixed above problem.
>
> No Signed-off-by: tag for this patch for OE-Core, I see one in the
> patch below.
Oh, yes, I miss it, I will add it.
>
> The patch does not seem to apply correctly, did you verify this
> against master?
>
Got it, thank your test, I will remake it.
//Wenlin
> Sau!
>
>
>> ---
>> .../bash/bash/fix-to-build-po-correctly.patch | 83 ++++++++++++++++++++
>> meta/recipes-extended/bash/bash_4.3.bb | 1 +
>> 2 files changed, 84 insertions(+)
>> create mode 100644
>> meta/recipes-extended/bash/bash/fix-to-build-po-correctly.patch
>>
>> diff --git
>> a/meta/recipes-extended/bash/bash/fix-to-build-po-correctly.patch
>> b/meta/recipes-extended/bash/bash/fix-to-build-po-correctly.patch
>> new file mode 100644
>> index 0000000..9db6fe2
>> --- /dev/null
>> +++ b/meta/recipes-extended/bash/bash/fix-to-build-po-correctly.patch
>> @@ -0,0 +1,83 @@
>> +
>> +Upstream-Status: Inappropriate [OE specific]
>> +Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
>> +
>> +diff -aurN bash-4.3-org/aclocal.m4 bash-4.3/aclocal.m4
>> +--- bash-4.3-org/aclocal.m4 2014-05-23 15:28:54.252565146 +0800
>> ++++ bash-4.3/aclocal.m4 2014-05-23 15:33:19.924570133 +0800
>> +@@ -3710,6 +3710,14 @@
>> + AC_REQUIRE([AC_PROG_INSTALL])dnl
>> + AC_REQUIRE([AM_MKINSTALLDIRS])dnl
>> + AC_REQUIRE([AM_NLS])dnl
>> ++ AC_REQUIRE([AC_PROG_MKDIR_P])dnl
>> ++ AC_REQUIRE([AC_PROG_SED])dnl
>> ++
>> ++ AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
>> ++
>> ++ dnl Release version of the gettext macros. This is used to ensure
>> that
>> ++ dnl the gettext macros and po/Makefile.in.in are in sync.
>> ++ AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
>> +
>> + dnl Perform the following tests also if --disable-nls has been given,
>> + dnl because they are needed for "make dist" to work.
>> +@@ -3723,6 +3731,22 @@
>> + :)
>> + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
>> +
>> ++ dnl Test whether it is GNU msgfmt >= 0.15.
>> ++changequote(,)dnl
>> ++ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
>> ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
>> ++ *) MSGFMT_015=$MSGFMT ;;
>> ++ esac
>> ++changequote([,])dnl
>> ++ AC_SUBST([MSGFMT_015])
>> ++changequote(,)dnl
>> ++ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
>> ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
>> ++ *) GMSGFMT_015=$GMSGFMT ;;
>> ++ esac
>> ++changequote([,])dnl
>> ++ AC_SUBST([GMSGFMT_015])
>> ++
>> + dnl Search for GNU xgettext 0.12 or newer in the PATH.
>> + dnl The first test excludes Solaris xgettext and early GNU xgettext
>> versions.
>> + dnl The second test excludes FreeBSD xgettext.
>> +@@ -3733,6 +3757,15 @@
>> + dnl Remove leftover from FreeBSD xgettext call.
>> + rm -f messages.po
>> +
>> ++ dnl Test whether it is GNU xgettext >= 0.15.
>> ++changequote(,)dnl
>> ++ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
>> ++ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
>> ++ *) XGETTEXT_015=$XGETTEXT ;;
>> ++ esac
>> ++changequote([,])dnl
>> ++ AC_SUBST([XGETTEXT_015])
>> ++
>> + dnl Search for GNU msgmerge 0.11 or newer in the PATH.
>> + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
>> + [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
>> +diff -aurN bash-4.3-org/configure.ac bash-4.3/configure.ac
>> +--- bash-4.3-org/configure.ac 2014-05-23 15:28:54.208565145 +0800
>> ++++ bash-4.3/configure.ac 2014-05-23 15:29:35.640565923 +0800
>> +@@ -1201,6 +1201,10 @@
>> + #AC_SUBST(ALLOCA_SOURCE)
>> + #AC_SUBST(ALLOCA_OBJECT)
>> +
>> ++# Define the identity of the package.
>> ++AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
>> ++AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])dnl
>> ++
>> + AC_OUTPUT([Makefile builtins/Makefile lib/readline/Makefile
>> lib/glob/Makefile \
>> + lib/intl/Makefile \
>> + lib/malloc/Makefile lib/sh/Makefile lib/termcap/Makefile \
>> +diff -aurN bash-4.3-org/po/Makevars bash-4.3/po/Makevars
>> +--- bash-4.3-org/po/Makevars 2014-05-23 15:28:54.204565145 +0800
>> ++++ bash-4.3/po/Makevars 2014-05-23 15:30:04.772566469 +0800
>> +@@ -5,7 +5,7 @@
>> +
>> + # These two variables depend on the location of this directory.
>> + subdir = po
>> +-top_builddir = $(BUILD_DIR)
>> ++top_builddir = ..
>> +
>> + # These options get passed to xgettext.
>> + XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ -C
>> diff --git a/meta/recipes-extended/bash/bash_4.3.bb
>> b/meta/recipes-extended/bash/bash_4.3.bb
>> index 25b7410..a6d7d40 100644
>> --- a/meta/recipes-extended/bash/bash_4.3.bb
>> +++ b/meta/recipes-extended/bash/bash_4.3.bb
>> @@ -10,6 +10,7 @@ SRC_URI =
>> "${GNU_MIRROR}/bash/${BPN}-${PV}.tar.gz;name=tarball \
>> file://build-tests.patch \
>> file://test-output.patch \
>> file://run-ptest \
>> + file://fix-to-build-po-correctly.patch \
>> "
>>
>> SRC_URI[tarball.md5sum] = "81348932d5da294953e15d4814c74dd1"
>>
>
>
--
Thanks,
Wenlin Kang
next prev parent reply other threads:[~2014-06-09 6:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-04 7:45 [PATCH] bash: fix to build bash/po/ correctly Wenlin Kang
2014-06-06 18:11 ` Saul Wold
2014-06-09 6:27 ` Wenlin Kang [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-06-09 6:29 [PATCH V2] " Wenlin Kang
2014-06-09 6:29 ` [PATCH] " Wenlin Kang
2014-07-02 9:48 ` Robert Yang
2014-07-02 11:21 ` Burton, Ross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=539553C8.5090803@windriver.com \
--to=wenlin.kang@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=sgw@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.