From: Dirk Brandewie <dirk.brandewie@gmail.com>
To: Martin Steigerwald <Martin@lichtvoll.de>,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Cc: dirk.brandewie@gmail.com
Subject: Re: [REGRESSION] 3.15: Seems to turbo mode Intel Sandybridge Dual Core without need, overheating CPU
Date: Mon, 09 Jun 2014 15:17:25 -0700 [thread overview]
Message-ID: <53963275.5040909@gmail.com> (raw)
In-Reply-To: <13232691.DxAv2jorp8@merkaba>
Hi Martin,
Can you send the output of:
turbostat sleep 10
and
for i in 0 1 2 3; do rdmsr -p $i -u -f15:8 0x198; done
For the normal and bad case please.
--Dirk
On 06/09/2014 02:33 PM, Martin Steigerwald wrote:
> Hi!
>
> Added linux-pm to Cc. Also reboots seems to fix up the condition:
>
> merkaba:~> grep . /sys/devices/system/cpu/cpu[0-3]/cpufreq/cpuinfo_cur_freq
> /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq:830957
> /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq:819628
> /sys/devices/system/cpu/cpu2/cpufreq/cpuinfo_cur_freq:800000
> /sys/devices/system/cpu/cpu3/cpufreq/cpuinfo_cur_freq:813476
> merkaba:~> sensors
> acpitz-virtual-0
> Adapter: Virtual device
> temp1: +71.0°C (crit = +98.0°C)
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Physical id 0: +71.0°C (high = +86.0°C, crit = +100.0°C)
> Core 0: +70.0°C (high = +86.0°C, crit = +100.0°C)
> Core 1: +71.0°C (high = +86.0°C, crit = +100.0°C)
>
> thinkpad-isa-0000
> Adapter: ISA adapter
> fan1: 3137 R
>
>
> Still hot in here and after reboot and login into KDE session there is quite
> some CPU activity for a while.
>
> But way better than before.
>
> I can test whether this also happens with ACPI cpufreq driver.
>
> I think I didn´t see this with 3.14.
>
>
>
> Am Montag, 9. Juni 2014, 23:24:54 schrieb Martin Steigerwald:
>> Hi!
>>
>> I get:
>>
>> Jun 9 22:41:32 merkaba kernel: [39978.006479] CPU0: Package temperature/speed normal
>> Jun 9 22:41:32 merkaba kernel: [39978.006481] CPU3: Package temperature/speed normal
>> Jun 9 22:41:32 merkaba kernel: [39978.006482] CPU2: Package temperature/speed normal
>> Jun 9 22:41:32 merkaba kernel: [39978.006487] CPU1: Package temperature/speed normal
>> Jun 9 22:44:02 merkaba kernel: [40127.673372] CPU2: Core temperature above threshold, cpu clock throttled (total events = 56554)
>> Jun 9 22:44:02 merkaba kernel: [40127.673383] CPU3: Core temperature above threshold, cpu clock throttled (total events = 56554)
>> Jun 9 22:44:02 merkaba kernel: [40127.674313] CPU3: Core temperature/speed normal
>> Jun 9 22:44:02 merkaba kernel: [40127.674352] CPU2: Core temperature/speed normal
>> Jun 9 22:45:21 merkaba kernel: [40207.302287] mce: [Hardware Error]: Machine check events logged
>> Jun 9 22:46:32 merkaba kernel: [40278.054568] CPU0: Package temperature/speed normal
>> Jun 9 22:46:32 merkaba kernel: [40278.054572] CPU3: Package temperature/speed normal
>> Jun 9 22:46:32 merkaba kernel: [40278.054574] CPU2: Package temperature/speed normal
>> Jun 9 22:46:32 merkaba kernel: [40278.054578] CPU1: Package temperature/speed normal
>> Jun 9 22:48:06 merkaba kernel: [40371.570654] perf interrupt took too long (19348 > 17857), lowering kernel.perf_event_max_sample_rate to 7000
>> Jun 9 22:51:32 merkaba kernel: [40578.103629] CPU3: Package temperature/speed normal
>> Jun 9 22:51:32 merkaba kernel: [40578.103633] CPU0: Package temperature/speed normal
>> Jun 9 22:51:32 merkaba kernel: [40578.103638] CPU2: Package temperature/speed normal
>> Jun 9 22:51:32 merkaba kernel: [40578.103639] CPU1: Package temperature/speed normal
>> Jun 9 22:56:32 merkaba kernel: [40878.174734] CPU1: Package temperature above threshold, cpu clock throttled (total events = 152620)
>> Jun 9 22:56:32 merkaba kernel: [40878.174737] CPU0: Package temperature above threshold, cpu clock throttled (total events = 152620)
>> Jun 9 22:56:32 merkaba kernel: [40878.174742] CPU3: Package temperature above threshold, cpu clock throttled (total events = 152620)
>> Jun 9 22:56:32 merkaba kernel: [40878.174744] CPU2: Package temperature above threshold, cpu clock throttled (total events = 152620)
>> Jun 9 22:56:32 merkaba kernel: [40878.176744] CPU3: Package temperature/speed normal
>> Jun 9 22:56:32 merkaba kernel: [40878.176746] CPU2: Package temperature/speed normal
>> Jun 9 22:56:32 merkaba kernel: [40878.176748] CPU1: Package temperature/speed normal
>> Jun 9 22:56:32 merkaba kernel: [40878.176749] CPU0: Package temperature/speed normal
>> Jun 9 22:59:11 merkaba kernel: [41037.278705] CPU3: Core temperature/speed normal
>> Jun 9 22:59:11 merkaba kernel: [41037.278707] CPU2: Core temperature/speed normal
>> Jun 9 23:01:32 merkaba kernel: [41178.225837] CPU2: Package temperature above threshold, cpu clock throttled (total events = 177343)
>> Jun 9 23:01:32 merkaba kernel: [41178.225841] CPU0: Package temperature above threshold, cpu clock throttled (total events = 177343)
>> Jun 9 23:01:32 merkaba kernel: [41178.225843] CPU3: Package temperature above threshold, cpu clock throttled (total events = 177343)
>> Jun 9 23:01:32 merkaba kernel: [41178.225845] CPU1: Package temperature above threshold, cpu clock throttled (total events = 177343)
>> Jun 9 23:01:32 merkaba kernel: [41178.237850] CPU1: Package temperature/speed normal
>> Jun 9 23:01:32 merkaba kernel: [41178.237853] CPU2: Package temperature/speed normal
>> Jun 9 23:01:32 merkaba kernel: [41178.237855] CPU0: Package temperature/speed normal
>> Jun 9 23:01:32 merkaba kernel: [41178.237856] CPU3: Package temperature/speed normal
>> Jun 9 23:01:36 merkaba kernel: [41182.452403] mce: [Hardware Error]: Machine check events logged
>> Jun 9 23:06:32 merkaba kernel: [41478.291923] CPU1: Package temperature above threshold, cpu clock throttled (total events = 204756)
>> Jun 9 23:06:32 merkaba kernel: [41478.291926] CPU0: Package temperature above threshold, cpu clock throttled (total events = 204756)
>> Jun 9 23:06:32 merkaba kernel: [41478.291946] CPU3: Package temperature above threshold, cpu clock throttled (total events = 204756)
>> Jun 9 23:06:32 merkaba kernel: [41478.291950] CPU2: Package temperature above threshold, cpu clock throttled (total events = 204756)
>> Jun 9 23:11:32 merkaba kernel: [41778.341992] CPU3: Package temperature/speed normal
>> Jun 9 23:11:32 merkaba kernel: [41778.341995] CPU0: Package temperature/speed normal
>> Jun 9 23:11:32 merkaba kernel: [41778.341996] CPU1: Package temperature/speed normal
>> Jun 9 23:11:32 merkaba kernel: [41778.341997] CPU2: Package temperature/speed normal
>>
>>
>> And this:
>>
>> merkaba:~> sensors
>> acpitz-virtual-0
>> Adapter: Virtual device
>> temp1: +96.0°C (crit = +98.0°C)
>>
>> coretemp-isa-0000
>> Adapter: ISA adapter
>> Physical id 0: +98.0°C (high = +86.0°C, crit = +100.0°C)
>> Core 0: +96.0°C (high = +86.0°C, crit = +100.0°C)
>> Core 1: +96.0°C (high = +86.0°C, crit = +100.0°C)
>>
>> thinkpad-isa-0000
>> Adapter: ISA adapter
>> fan1: 3580 RPM
>>
>> merkaba:~> acpi -t
>> Thermal 0: ok, 96.0 degrees C
>>
>>
>> On
>>
>> martin@merkaba:~> phoronix-test-suite system-info
>>
>> Phoronix Test Suite v4.8.3
>> System Information
>>
>> Hardware:
>> Processor: Intel Core i5-2520M @ 3.20GHz (4 Cores), Motherboard: LENOVO 42433WG, Chipset: Intel 2nd Generation Core Family DRAM, Memory: 8192MB, Disk: 300GB INTEL SSDSA2CW30 + 480GB Crucial_CT480M50, Graphics: Intel HD 3000 (1300MHz), Audio: Intel 6 /C200, Network: Intel 82579LM Gigabit Connection + Intel Centrino Advanced-N 6205
>>
>> Software:
>> OS: Debian unstable, Kernel: 3.15.0-tp520 (x86_64), Desktop: KDE 4.13.1, Display Server: X Server 1.15.1, Display Driver: intel 2.21.15, OpenGL: 3.1 Mesa 10.1.4, Compiler: GCC 4.8, File-System: btrfs, Screen Resolution: 1920x1080
>>
>>
>> during playing PlaneShift with Intel gfx.
>>
>>
>> I get the impression that Intel P-State driver turbo modes all of the cores
>> needlessly *and* permanently once this condition is triggered. Usually
>> temperature is just about 55-60 degree celsius. But not at maximum.
>>
>>
>> I see this:
>>
>> merkaba:/sys/devices/system/cpu> grep . cpu[0-3]/cpufreq/cpuinfo_cur_freq
>> cpu0/cpufreq/cpuinfo_cur_freq:3015917
>> cpu1/cpufreq/cpuinfo_cur_freq:3008984
>> cpu2/cpufreq/cpuinfo_cur_freq:3000000
>> cpu3/cpufreq/cpuinfo_cur_freq:3000000
>>
>>
>> Without that much work to do:
>>
>> merkaba:~> mpstat -P ALL 10
>> Linux 3.15.0-tp520 (merkaba) 09.06.2014 _x86_64_ (4 CPU)
>>
>> 23:21:42 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
>> 23:21:52 all 15,61 0,00 2,68 10,33 0,15 0,00 0,00 0,00 0,00 71,23
>> 23:21:52 0 25,70 0,00 4,22 22,59 0,30 0,00 0,00 0,00 0,00 47,19
>> 23:21:52 1 20,02 0,00 1,80 14,71 0,10 0,00 0,00 0,00 0,00 63,36
>> 23:21:52 2 10,14 0,00 2,61 3,01 0,10 0,00 0,00 0,00 0,00 84,14
>> 23:21:52 3 6,63 0,00 2,11 0,80 0,10 0,00 0,00 0,00 0,00 90,36
>>
>> 23:21:52 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
>> 23:22:02 all 14,19 0,00 2,26 10,93 0,13 0,00 0,00 0,00 0,00 72,50
>> 23:22:02 0 32,26 0,00 4,01 31,86 0,20 0,00 0,00 0,00 0,00 31,66
>> 23:22:02 1 12,11 0,00 1,30 8,51 0,10 0,00 0,00 0,00 0,00 77,98
>> 23:22:02 2 8,12 0,00 2,21 2,91 0,10 0,00 0,00 0,00 0,00 86,66
>> 23:22:02 3 4,31 0,00 1,60 0,40 0,10 0,00 0,00 0,00 0,00 93,59
>>
>> 23:22:02 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
>> 23:22:12 all 25,33 0,03 2,63 9,00 0,15 0,00 0,00 0,00 0,00 62,87
>> 23:22:12 0 35,71 0,00 4,01 19,56 0,20 0,00 0,00 0,00 0,00 40,52
>> 23:22:12 1 27,43 0,00 1,90 10,61 0,20 0,00 0,00 0,00 0,00 59,86
>> 23:22:12 2 22,14 0,10 2,40 4,41 0,10 0,00 0,00 0,00 0,00 70,84
>> 23:22:12 3 15,96 0,10 2,21 1,41 0,10 0,00 0,00 0,00 0,00 80,22
>>
>> 23:22:12 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
>> 23:22:22 all 27,90 0,03 3,94 8,87 0,33 0,00 0,00 0,00 0,00 58,94
>> 23:22:22 0 36,77 0,00 5,81 20,74 0,90 0,00 0,00 0,00 0,00 35,77
>> 23:22:22 1 28,99 0,00 2,41 10,13 0,10 0,00 0,00 0,00 0,00 58,38
>> 23:22:22 2 25,48 0,00 3,81 3,21 0,20 0,00 0,00 0,00 0,00 67,30
>> 23:22:22 3 20,34 0,00 3,71 1,40 0,20 0,00 0,00 0,00 0,00 74,35
>>
>>
>>
>> Will reboot now to see whether it resets that condition. Didn´t happen during the whole
>> day.
>>
>> But seems to happen after a while of playing PlaneShift.
>>
>> Any hints?
>
> Thanks,
>
next prev parent reply other threads:[~2014-06-09 22:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-09 21:24 [REGRESSION] 3.15: Seems to turbo mode Intel Sandybridge Dual Core without need, overheating CPU Martin Steigerwald
2014-06-09 21:33 ` Martin Steigerwald
2014-06-09 21:41 ` Martin Steigerwald
2014-06-09 22:02 ` Martin Steigerwald
2014-06-09 22:44 ` Dirk Brandewie
2014-06-10 9:33 ` Martin Steigerwald
2014-06-09 22:20 ` Rafael J. Wysocki
2014-06-09 22:11 ` Martin Steigerwald
2014-06-09 22:31 ` Rafael J. Wysocki
2014-06-09 22:29 ` Rafael J. Wysocki
2014-06-10 9:31 ` Martin Steigerwald
2014-06-10 2:37 ` Doug Smythies
2014-06-10 2:37 ` Doug Smythies
2014-06-09 22:17 ` Dirk Brandewie [this message]
2014-06-11 20:39 ` Martin Steigerwald
2014-06-11 20:44 ` Martin Steigerwald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53963275.5040909@gmail.com \
--to=dirk.brandewie@gmail.com \
--cc=Martin@lichtvoll.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.