[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
that I posted earlier. Here we add the VIN and ADV7180 video decoder device
tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
that I posted earlier. Here we add the VIN and ADV7180 video decoder device
tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

   Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
that I posted earlier. Here we add the VIN and ADV7180 video decoder device
tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
order to work.

[1/2] ARM: shmobile: r8a7791: add VIN DT support
[2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

WBR, Sergei

[PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -518,6 +521,30 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -518,6 +521,30 @@
 		status = "disabled";
 	};
 
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
 		spi1 = &msiof0;
 		spi2 = &msiof1;
 		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
 	};
 
 	cpus {
@@ -518,6 +521,30 @@
 		status = "disabled";
 	};
 
+	vin0: video at e6ef0000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video at e6ef1000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video at e6ef2000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

Re: [PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:06 AM, Sergei Shtylyov wrote:

> Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
> the VIN[0-2] device nodes.

> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

> ---
>   arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
>   1 file changed, 27 insertions(+)

> Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
> =================================> --- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7791.dtsi
[...]
> @@ -518,6 +521,30 @@
>   		status = "disabled";
>   	};
>
> +	vin0: video@e6ef0000 {
> +		compatible = "renesas,vin-r8a7790";

    Duh, should have been "renesas,vin-r8a7791"...

WBR, Sergei

Re: [PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:06 AM, Sergei Shtylyov wrote:

> Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
> the VIN[0-2] device nodes.

> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

> ---
>   arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
>   1 file changed, 27 insertions(+)

> Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7791.dtsi
[...]
> @@ -518,6 +521,30 @@
>   		status = "disabled";
>   	};
>
> +	vin0: video@e6ef0000 {
> +		compatible = "renesas,vin-r8a7790";

    Duh, should have been "renesas,vin-r8a7791"...

WBR, Sergei

[PATCH 1/2] ARM: shmobile: r8a7791: add VIN DT support

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:06 AM, Sergei Shtylyov wrote:

> Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
> the VIN[0-2] device nodes.

> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

> ---
>   arch/arm/boot/dts/r8a7791.dtsi |   27 +++++++++++++++++++++++++++
>   1 file changed, 27 insertions(+)

> Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7791.dtsi
[...]
> @@ -518,6 +521,30 @@
>   		status = "disabled";
>   	};
>
> +	vin0: video at e6ef0000 {
> +		compatible = "renesas,vin-r8a7790";

    Duh, should have been "renesas,vin-r8a7791"...

WBR, Sergei

[PATCH 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,11 @@
 				 "msiof0_tx";
 		renesas,function = "msiof0";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -181,6 +186,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -230,3 +248,20 @@
 		spi-cpha;
 	};
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

[PATCH 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,11 @@
 				 "msiof0_tx";
 		renesas,function = "msiof0";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -181,6 +186,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -230,3 +248,20 @@
 		spi-cpha;
 	};
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

[PATCH 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2  bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm/boot/dts/r8a7791-henninger.dts |   35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -125,6 +125,11 @@
 				 "msiof0_tx";
 		renesas,function = "msiof0";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif0 {
@@ -181,6 +186,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in at 20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &qspi {
@@ -230,3 +248,20 @@
 		spi-cpha;
 	};
 };
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 03:04:18AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> order to work.

I wonder what the status of those (driver?) patches are.

In general I prefer bindings to be accepted before they are used.

> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support
> 
> WBR, Sergei
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 03:04:18AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> order to work.

I wonder what the status of those (driver?) patches are.

In general I prefer bindings to be accepted before they are used.

> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support
> 
> WBR, Sergei
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 03:04:18AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> order to work.

I wonder what the status of those (driver?) patches are.

In general I prefer bindings to be accepted before they are used.

> [1/2] ARM: shmobile: r8a7791: add VIN DT support
> [2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support
> 
> WBR, Sergei
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:54 AM, Simon Horman wrote:

>>     Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
>> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
>> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
>> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
>> order to work.

> I wonder what the status of those (driver?) patches are.

    Someone in CodeThink is working on them, I was told. I had to fix them up 
somewhat in order for them to compile.

> In general I prefer bindings to be accepted before they are used.

    No argument here. I just have my own schedule.

WBR, Sergei

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:54 AM, Simon Horman wrote:

>>     Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
>> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
>> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
>> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
>> order to work.

> I wonder what the status of those (driver?) patches are.

    Someone in CodeThink is working on them, I was told. I had to fix them up 
somewhat in order for them to compile.

> In general I prefer bindings to be accepted before they are used.

    No argument here. I just have my own schedule.

WBR, Sergei

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Sergei Shtylyov]

Hello.

On 06/11/2014 03:54 AM, Simon Horman wrote:

>>     Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
>> 'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
>> that I posted earlier. Here we add the VIN and ADV7180 video decoder device
>> tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
>> adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
>> order to work.

> I wonder what the status of those (driver?) patches are.

    Someone in CodeThink is working on them, I was told. I had to fix them up 
somewhat in order for them to compile.

> In general I prefer bindings to be accepted before they are used.

    No argument here. I just have my own schedule.

WBR, Sergei

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 04:41:33PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 06/11/2014 03:54 AM, Simon Horman wrote:
> 
> >>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> >>that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> >>tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> >>adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> >>order to work.
> 
> >I wonder what the status of those (driver?) patches are.
> 
>    Someone in CodeThink is working on them, I was told. I had to fix them up
> somewhat in order for them to compile.
> 
> >In general I prefer bindings to be accepted before they are used.
> 
>    No argument here. I just have my own schedule.

No argument there either :)

Re: [PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 04:41:33PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 06/11/2014 03:54 AM, Simon Horman wrote:
> 
> >>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> >>that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> >>tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> >>adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> >>order to work.
> 
> >I wonder what the status of those (driver?) patches are.
> 
>    Someone in CodeThink is working on them, I was told. I had to fix them up
> somewhat in order for them to compile.
> 
> >In general I prefer bindings to be accepted before they are used.
> 
>    No argument here. I just have my own schedule.

No argument there either :)

[PATCH 0/2] Add VIN and ADV7180 DT support for R8A7791/Henninger board

[Simon Horman]

On Wed, Jun 11, 2014 at 04:41:33PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 06/11/2014 03:54 AM, Simon Horman wrote:
> 
> >>    Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> >>'renesas-devel-v3.15-20140610' tag plus the Henninger I2C2 DT support patch
> >>that I posted earlier. Here we add the VIN and ADV7180 video decoder device
> >>tree support on the R8A7791/Henninger board. The patchset requires Ben Dooks'
> >>adv7180, rcar_vin, and soc_camera DT support patches posted back in April in
> >>order to work.
> 
> >I wonder what the status of those (driver?) patches are.
> 
>    Someone in CodeThink is working on them, I was told. I had to fix them up
> somewhat in order for them to compile.
> 
> >In general I prefer bindings to be accepted before they are used.
> 
>    No argument here. I just have my own schedule.

No argument there either :)