From: Bruce Ashfield <bruce.ashfield@windriver.com>
To: Kevin Hao <kexin.hao@windriver.com>, <poky@yoctoproject.org>
Subject: Re: [PATCH v2 0/3] meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board
Date: Mon, 16 Jun 2014 00:08:01 -0400 [thread overview]
Message-ID: <539E6DA1.5050301@windriver.com> (raw)
In-Reply-To: <1402710444-2334-1-git-send-email-kexin.hao@windriver.com>
On 2014-06-13, 9:47 PM, Kevin Hao wrote:
> Hi,
>
> v2:
> Add the example about booting from jffs2 root in README.hardware
>
Looks good to me.
As promised, I stacked these on top of my kernel update for NAND support
on the board.
If all goes well, I'll send the merge pull request tomorrow.
Bruce
> v1:
> This tries to enable the jffs2 support for the mpc8315e-rdb board. I have
> tested the jffs2 with the following steps and it worked perfectly.
>
> 1. root@mpc8315e-rdb:~# cat /proc/mtd
> dev: size erasesize name
> mtd0: 00800000 00010000 "fe000000.flash"
> mtd1: 00100000 00004000 "u-boot"
> mtd2: 00300000 00004000 "kernel"
> mtd3: 01c00000 00004000 "fs"
>
> 2. root@mpc8315e-rdb:~# flash_eraseall /dev/mtd3
> flash_eraseall has been replaced by `flash_erase <mtddev> 0 0`; please use it
> Erasing 16 Kibyte @ 1bec000 -- 99 % complete flash_erase: Skipping bad block at 01bf0000
> flash_erase: Skipping bad block at 01bf4000
> flash_erase: Skipping bad block at 01bf8000
> flash_erase: Skipping bad block at 01bfc000
> Erasing 16 Kibyte @ 1bfc000 -- 100 % complete
>
> 3. root@mpc8315e-rdb:~# flashcp core-image-minimal-mpc8315e-rdb.jffs2 /dev/mtd3
>
> 4. Then boot with a jffs2 rootfs
>
> 5. root@mpc8315e-rdb:~# cat /proc/cmdline
> root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200
> root@mpc8315e-rdb:~#
> root@mpc8315e-rdb:~# mount
> rootfs on / type rootfs (rw)
> /dev/root on / type jffs2 (rw,relatime)
> devtmpfs on /dev type devtmpfs (rw,relatime,size=59136k,nr_inodes=14784,mode=755)
> proc on /proc type proc (rw,relatime)
> sysfs on /sys type sysfs (rw,relatime)
> debugfs on /sys/kernel/debug type debugfs (rw,relatime)
> tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
> tmpfs on /var/volatile type tmpfs (rw,relatime)
> devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
>
> The following changes since commit 8e0c54cd0e82ffe120f84f495101cd29e6fd06bf:
>
> bitbake: bb/utils: fix contains_any() (2014-06-12 17:47:59 +0100)
>
> are available in the git repository at:
>
> git://git.yoctoproject.org/poky-contrib hao/master
>
> for you to fetch changes up to 05ef8967ff189b16485e1a462c8de1ed74a08a32:
>
> mpc8315e-rdb: add the example about booting from jffs2 root (2014-06-14 09:24:26 +0800)
>
> ----------------------------------------------------------------
> Kevin Hao (3):
> mpc8315e-rdb: bump to linux-yocto 3.14
> mpc8315e-rdb: add the jffs2 image support
> mpc8315e-rdb: add the example about booting from jffs2 root
>
> README.hardware | 16 ++++++++++++++++
> meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf | 5 ++++-
> .../recipes-kernel/linux/linux-yocto_3.14.bbappend | 3 +++
> 3 files changed, 23 insertions(+), 1 deletion(-)
>
prev parent reply other threads:[~2014-06-16 4:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-14 1:47 [PATCH v2 0/3] meta-yocto-bsp: enable the jffs2 for mpc8315e-rdb board Kevin Hao
2014-06-14 1:47 ` [PATCH v2 1/3] mpc8315e-rdb: bump to linux-yocto 3.14 Kevin Hao
2014-06-14 1:47 ` [PATCH v2 2/3] mpc8315e-rdb: add the jffs2 image support Kevin Hao
2014-06-14 1:47 ` [PATCH v2 3/3] mpc8315e-rdb: add the example about booting from jffs2 root Kevin Hao
2014-06-16 4:08 ` Bruce Ashfield [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=539E6DA1.5050301@windriver.com \
--to=bruce.ashfield@windriver.com \
--cc=kexin.hao@windriver.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.