From: Ben Greear <greearb@candelatech.com>
To: netdev <netdev@vger.kernel.org>
Subject: lockdep splat in hacked 3.14.7+, ipv6 related?
Date: Tue, 17 Jun 2014 17:31:49 -0700 [thread overview]
Message-ID: <53A0DDF5.80103@candelatech.com> (raw)
As usual, this is from my tree with local patches:
http://dmz2.candelatech.com/git/gitweb.cgi?p=linux-3.14.dev.y/.git;a=summary
There is no cxgb4 (chelsio) hardware in this system, for what that's worth,
but it seems some iscsi code loaded the driver.
=================================
[ INFO: inconsistent lock state ]
3.14.7+ #24 Tainted: G C O
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
radvd/3794 [HC0[0]:SC1[1]:HE1:SE0] takes:
(adap_rcu_lock){+.?...}, at: [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4]
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810fca81>] __lock_acquire+0x34a/0xe48
[<ffffffff810fd98b>] lock_acquire+0x82/0x9d
[<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43
[<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4]
[<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4]
[<ffffffff815da98b>] notifier_call_chain+0x32/0x5c
[<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e
[<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18
[<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6]
[<ffffffffa01f8df0>] addrconf_add_linklocal+0x5f/0x95 [ipv6]
[<ffffffffa01fc3e9>] addrconf_notify+0x632/0x841 [ipv6]
[<ffffffff815da98b>] notifier_call_chain+0x32/0x5c
[<ffffffff810e09a1>] __raw_notifier_call_chain+0x9/0xb
[<ffffffff810e09b2>] raw_notifier_call_chain+0xf/0x11
[<ffffffff8151b3b7>] call_netdevice_notifiers_info+0x4e/0x56
[<ffffffff8151b3d0>] call_netdevice_notifiers+0x11/0x13
[<ffffffff8151c0a6>] netdev_state_change+0x1f/0x38
[<ffffffff8152f004>] linkwatch_do_dev+0x3b/0x49
[<ffffffff8152f184>] __linkwatch_run_queue+0x10b/0x144
[<ffffffff8152f1dd>] linkwatch_event+0x20/0x27
[<ffffffff810d7bc0>] process_one_work+0x1cb/0x2ee
[<ffffffff810d7e3b>] worker_thread+0x12e/0x1fc
[<ffffffff810dd391>] kthread+0xc4/0xcc
[<ffffffff815dc48c>] ret_from_fork+0x7c/0xb0
irq event stamp: 3388
hardirqs last enabled at (3388): [<ffffffff810c6c85>] __local_bh_enable_ip+0xaa/0xd9
hardirqs last disabled at (3387): [<ffffffff810c6c2d>] __local_bh_enable_ip+0x52/0xd9
softirqs last enabled at (3288): [<ffffffffa01f1d5b>] rcu_read_unlock_bh+0x0/0x2f [ipv6]
softirqs last disabled at (3289): [<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(adap_rcu_lock);
<Interrupt>
lock(adap_rcu_lock);
*** DEADLOCK ***
5 locks held by radvd/3794:
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffffa020b85a>] rawv6_sendmsg+0x74b/0xa4d [ipv6]
#1: (rcu_read_lock){.+.+..}, at: [<ffffffff8151ac6b>] rcu_lock_acquire+0x0/0x29
#2: (rcu_read_lock){.+.+..}, at: [<ffffffffa01f4cca>] rcu_lock_acquire.constprop.16+0x0/0x30 [ipv6]
#3: (rcu_read_lock){.+.+..}, at: [<ffffffff810e09b4>] rcu_lock_acquire+0x0/0x29
#4: (rcu_read_lock){.+.+..}, at: [<ffffffffa0998782>] rcu_lock_acquire.constprop.40+0x0/0x30 [cxgb4]
stack backtrace:
CPU: 7 PID: 3794 Comm: radvd Tainted: G C O 3.14.7+ #24
Hardware name: Supermicro X7DBU/X7DBU, BIOS 6.00 12/03/2007
ffffffff81f15990 ffff88012fdc36a8 ffffffff815d0016 0000000000000006
ffff8800c80dc2a0 ffff88012fdc3708 ffffffff815cc727 0000000000000001
0000000000000001 ffff880100000000 ffffffff81015b02 ffff8800c80dcb58
Call Trace:
<IRQ> [<ffffffff815d0016>] dump_stack+0x4e/0x71
[<ffffffff815cc727>] print_usage_bug+0x1ec/0x1fd
[<ffffffff81015b02>] ? save_stack_trace+0x27/0x44
[<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0
[<ffffffff810fc640>] mark_lock+0x11b/0x212
[<ffffffff810fca0b>] __lock_acquire+0x2d4/0xe48
[<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0
[<ffffffff810fbff6>] ? check_usage_forwards+0x4c/0xa6
[<ffffffff810c6c8a>] ? __local_bh_enable_ip+0xaf/0xd9
[<ffffffff810fd98b>] lock_acquire+0x82/0x9d
[<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4]
[<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4]
[<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43
[<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4]
[<ffffffffa09987b0>] ? rcu_lock_acquire.constprop.40+0x2e/0x30 [cxgb4]
[<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4]
[<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4]
[<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4]
[<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d
[<ffffffff810e09b4>] ? raw_notifier_call_chain+0x11/0x11
[<ffffffff815da98b>] notifier_call_chain+0x32/0x5c
[<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e
[<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11
[<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18
[<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6]
[<ffffffff810fde6a>] ? trace_hardirqs_on+0xd/0xf
[<ffffffffa01fb634>] addrconf_prefix_rcv+0x385/0x6ea [ipv6]
[<ffffffffa0207950>] ndisc_rcv+0x9d3/0xd76 [ipv6]
[<ffffffffa020d536>] icmpv6_rcv+0x592/0x67b [ipv6]
[<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9
[<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9
[<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b
[<ffffffffa020df97>] ? rcu_read_unlock+0x21/0x23 [ipv6]
[<ffffffff8150df52>] ? rcu_read_unlock+0x23/0x23
[<ffffffffa01f4ede>] ip6_input_finish+0x1e4/0x2fc [ipv6]
[<ffffffffa01f540b>] ip6_input+0x33/0x38 [ipv6]
[<ffffffffa01f5557>] ip6_mc_input+0x147/0x160 [ipv6]
[<ffffffffa01f4ba3>] ip6_rcv_finish+0x7c/0x81 [ipv6]
[<ffffffffa01f5397>] ipv6_rcv+0x3a1/0x3e2 [ipv6]
[<ffffffff8151ef96>] __netif_receive_skb_core+0x4ab/0x511
[<ffffffff810fdc94>] ? mark_held_locks+0x71/0x99
[<ffffffff8151f0c0>] ? process_backlog+0x69/0x15e
[<ffffffff8151f045>] __netif_receive_skb+0x49/0x5b
[<ffffffff8151f0cf>] process_backlog+0x78/0x15e
[<ffffffff8151f571>] ? net_rx_action+0x1a2/0x1cc
[<ffffffff8151f47b>] net_rx_action+0xac/0x1cc
[<ffffffff810c69b7>] ? __do_softirq+0xad/0x218
[<ffffffff810c69ff>] __do_softirq+0xf5/0x218
[<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30
<EOI> [<ffffffff810c6bb6>] do_softirq+0x38/0x5d
[<ffffffffa01f1d5b>] ? ip6_copy_metadata+0x156/0x156 [ipv6]
[<ffffffff810c6c78>] __local_bh_enable_ip+0x9d/0xd9
[<ffffffffa01f1d88>] rcu_read_unlock_bh+0x2d/0x2f [ipv6]
[<ffffffffa01f28b4>] ip6_finish_output2+0x381/0x3d8 [ipv6]
[<ffffffffa01f49ef>] ip6_finish_output+0x6e/0x73 [ipv6]
[<ffffffffa01f4a70>] ip6_output+0x7c/0xa8 [ipv6]
[<ffffffff815b1bfa>] dst_output+0x18/0x1c
[<ffffffff815b1c9e>] ip6_local_out+0x1c/0x21
[<ffffffffa01f2489>] ip6_push_pending_frames+0x37d/0x427 [ipv6]
[<ffffffff81558af8>] ? skb_orphan+0x39/0x39
[<ffffffffa020b85a>] ? rawv6_sendmsg+0x74b/0xa4d [ipv6]
[<ffffffffa020ba51>] rawv6_sendmsg+0x942/0xa4d [ipv6]
[<ffffffff81584cd2>] inet_sendmsg+0x3d/0x66
[<ffffffff81508930>] __sock_sendmsg_nosec+0x25/0x27
[<ffffffff8150b0d7>] sock_sendmsg+0x5a/0x7b
[<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b
[<ffffffff8116d756>] ? might_fault+0x9e/0xa5
[<ffffffff8116d70d>] ? might_fault+0x55/0xa5
[<ffffffff81508cb1>] ? copy_from_user+0x2a/0x2c
[<ffffffff8150b70c>] ___sys_sendmsg+0x226/0x2d9
[<ffffffff810fcd25>] ? __lock_acquire+0x5ee/0xe48
[<ffffffff810fde01>] ? trace_hardirqs_on_caller+0x145/0x1a1
[<ffffffff8118efcb>] ? slab_free_hook.isra.71+0x50/0x59
[<ffffffff8115c81f>] ? release_pages+0xbc/0x181
[<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d
[<ffffffff81115e97>] ? read_seqcount_begin.constprop.25+0x73/0x90
[<ffffffff8150c408>] __sys_sendmsg+0x3d/0x5b
[<ffffffff8150c433>] SyS_sendmsg+0xd/0x19
[<ffffffff815dc53d>] system_call_fastpath+0x1a/0x1f
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next reply other threads:[~2014-06-18 0:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-18 0:31 Ben Greear [this message]
2014-06-19 9:06 ` [PATCH] cxgb4: disable BH when hold the adap_rcu_lock lock roy.qing.li
2014-06-19 13:40 ` Eric Dumazet
2014-06-19 13:48 ` Li RongQing
2014-06-19 13:54 ` Eric Dumazet
2014-06-19 13:55 ` Hariprasad S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A0DDF5.80103@candelatech.com \
--to=greearb@candelatech.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.