óûÿ@€@@@€ U-Boot SPL 2013.10-g78d8ebd (Mar 06 2014 - 13:52:53) DRA752 ES1.0 DRA iterations=20 DRA iterations=20SPL: Please implement spl_start_uboot() for your board SPL: Direct Linux boot not active! reading u-boot.img reading u-boot.img U-Boot 2013.10-g78d8ebd (Mar 06 2014 - 13:52:53) CPU : DRA752 ES1.0 Board: DRA7xx I2C: ready DRAM: 1.5 GiB NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: cpsw Hit any key to stop autoboot: 3  2  1  0 link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.24.190.135 link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.24.190.153; our IP address is 172.24.190.135 Filename 'zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################### 1.9 MiB/s done Bytes transferred = 4362216 (428fe8 hex) link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.24.190.153; our IP address is 172.24.190.135 Filename 'dra7-evm.dtb'. Load address: 0x81800000 Loading: *##### 1.6 MiB/s done Bytes transferred = 59386 (e7fa hex) link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.24.190.153; our IP address is 172.24.190.135 Filename 'ramdisk.ext2.gz'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ######## 1.9 MiB/s done Bytes transferred = 2013059 (1eb783 hex) Kernel image @ 0x81000000 [ 0x000000 - 0x428fe8 ] ## Flattened Device Tree blob at 81800000 Booting using the fdt blob at 0x81800000 Using Device Tree in place at 81800000, end 818117f9 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc1-00002-g3e0ca738 (a0875516@psplinux063) (gcc version 4.8.2 20131014 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) ) #16 SMP Mon Jun 23 20:08:41 IST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 388864 [ 0.000000] free_area_init_node: node 0, pgdat c08c0a00, node_mem_map edc11000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1518 pages used for memmap [ 0.000000] HighMem zone: 194304 pages, LIFO batch:31 [ 0.000000] DRA752 ES1.0 [ 0.000000] PERCPU: Embedded 9 pages/cpu @edbaf000 s14336 r8192 d14336 u36864 [ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387344 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk1p2 rw rootwait loglevel=8 nosmp [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1508444K/1555456K available (5659K kernel code, 680K rwdata, 2200K rodata, 402K init, 8209K bss, 47012K reserved, 777216K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07b51cc (7861 kB) [ 0.000000] .init : 0xc07b6000 - 0xc081a800 ( 402 kB) [ 0.000000] .data : 0xc081c000 - 0xc08c6370 ( 681 kB) [ 0.000000] .bss : 0xc08c6370 - 0xc10ca7d0 (8210 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000366] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000371] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2796202663936ns [ 0.000382] Switching to timer-based delay loop [ 0.001359] Console: colour dummy device 80x30 [ 0.001384] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001395] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001406] ... MAX_LOCK_DEPTH: 48 [ 0.001417] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001427] ... CLASSHASH_SIZE: 4096 [ 0.001437] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001447] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001457] ... CHAINHASH_SIZE: 32768 [ 0.001467] memory used by lock dependency info: 5167 kB [ 0.001477] per task-struct memory footprint: 1152 bytes [ 0.001510] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440) [ 0.001530] pid_max: default: 32768 minimum: 301 [ 0.001851] Security Framework initialized [ 0.001966] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001982] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003554] CPU: Testing write buffer coherency: ok [ 0.004284] /cpus/cpu@0 missing clock-frequency property [ 0.004321] /cpus/cpu@1 missing clock-frequency property [ 0.004337] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004396] Setting up static identity map for 0x80561088 - 0x805610f8 [ 0.006727] Brought up 1 CPUs [ 0.006740] SMP: Total of 1 processors activated. [ 0.006752] CPU: All CPU(s) started in SVC mode. [ 0.008407] devtmpfs: initialized [ 0.018107] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.018207] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.111915] omap_hwmod: dss_core: _wait_target_disable failed [ 0.111935] omap_hwmod: dss_core: cannot be enabled for reset (3) [ 0.114500] omap_hwmod: dss_dispc: cannot be enabled for reset (3) [ 0.117065] omap_hwmod: dss_hdmi: cannot be enabled for reset (3) [ 0.184937] pinctrl core: initialized pinctrl subsystem [ 0.186597] regulator-dummy: no parameters [ 0.229091] NET: Registered protocol family 16 [ 0.233273] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.234672] cpuidle: using governor ladder [ 0.234708] cpuidle: using governor menu [ 0.237194] omap_l3_noc 44000000.ocp: L3 debug error: target 2 mod:1 (unclearable) [ 0.237306] omap_l3_noc 44000000.ocp: L3 application error: target 2 mod:1 (unclearable) [ 0.241047] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.241693] OMAP GPIO hardware version 0.1 [ 0.242510] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.243801] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.245058] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.246335] gpiochip_add: registered GPIOs 128 to 159 on device: gpio [ 0.247592] gpiochip_add: registered GPIOs 160 to 191 on device: gpio [ 0.248853] gpiochip_add: registered GPIOs 192 to 223 on device: gpio [ 0.250114] gpiochip_add: registered GPIOs 224 to 255 on device: gpio [ 0.256575] platform 4e000000.dmm: Cannot lookup hwmod 'dmm' [ 0.261059] ------------[ cut here ]------------ [ 0.261082] WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:277 irq_domain_associate+0x154/0x1bc() [ 0.261094] error: hwirq 0x177 is too large for GIC [ 0.261105] Modules linked in: [ 0.261127] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-00002-g3e0ca738 #16 [ 0.261153] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 0.261175] [] (show_stack) from [] (dump_stack+0x84/0x9c) [ 0.261193] [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x90) [ 0.261209] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 0.261227] [] (warn_slowpath_fmt) from [] (irq_domain_associate+0x154/0x1bc) [ 0.261245] [] (irq_domain_associate) from [] (irq_create_mapping+0x6c/0x10c) [ 0.261261] [] (irq_create_mapping) from [] (irq_create_of_mapping+0x78/0x110) [ 0.261282] [] (irq_create_of_mapping) from [] (irq_of_parse_and_map+0x24/0x2c) [ 0.261299] [] (irq_of_parse_and_map) from [] (of_irq_to_resource+0x18/0xb4) [ 0.261317] [] (of_irq_to_resource) from [] (of_irq_to_resource_table+0x38/0x54) [ 0.261334] [] (of_irq_to_resource_table) from [] (of_device_alloc+0xd4/0x150) [ 0.261351] [] (of_device_alloc) from [] (of_platform_device_create_pdata+0x4c/0x10c) [ 0.261367] [] (of_platform_device_create_pdata) from [] (of_platform_bus_create+0xdc/0x168) [ 0.261384] [] (of_platform_bus_create) from [] (of_platform_bus_create+0x138/0x168) [ 0.261401] [] (of_platform_bus_create) from [] (of_platform_populate+0x5c/0xa0) [ 0.261420] [] (of_platform_populate) from [] (pdata_quirks_init+0x34/0x44) [ 0.261438] [] (pdata_quirks_init) from [] (omap_generic_init+0x10/0x1c) [ 0.261456] [] (omap_generic_init) from [] (customize_machine+0x1c/0x40) [ 0.261473] [] (customize_machine) from [] (do_one_initcall+0x80/0x1cc) [ 0.261489] [] (do_one_initcall) from [] (kernel_init_freeable+0x104/0x1c8) [ 0.261508] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xec) [ 0.261525] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 0.261581] ---[ end trace 748236b9e3fe1e7d ]--- [ 0.265492] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/pinmux@4a003400/nand_flash_x16, deferring probe [ 0.265517] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral [ 0.266328] No ATAGs? [ 0.266369] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.266396] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.268472] OMAP DMA hardware revision 0.0 [ 0.288097] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.288140] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.314064] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.314586] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator-mmc2[0]' [ 0.314975] mmc2_3v3: 3300 mV [ 0.317748] SCSI subsystem initialized [ 0.318356] usbcore: registered new interface driver usbfs [ 0.318492] usbcore: registered new interface driver hub [ 0.321553] usbcore: registered new device driver usb [ 0.322246] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c1_pins, deferring probe [ 0.322272] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 0.322326] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c2_pins, deferring probe [ 0.322349] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 0.322401] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a003400/pinmux_i2c3_pins, deferring probe [ 0.322423] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 0.325152] Switched to clocksource arch_sys_counter [ 0.432356] NET: Registered protocol family 2 [ 0.433413] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.433608] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.435906] TCP: Hash tables configured (established 8192 bind 8192) [ 0.436029] TCP: reno registered [ 0.436068] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.436375] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.437323] NET: Registered protocol family 1 [ 0.438394] RPC: Registered named UNIX socket transport module. [ 0.438422] RPC: Registered udp transport module. [ 0.438435] RPC: Registered tcp transport module. [ 0.438447] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.442720] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.445593] VFS: Disk quotas dquot_6.5.2 [ 0.445678] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.447189] NFS: Registering the id_resolver key type [ 0.447389] Key type id_resolver registered [ 0.447417] Key type id_legacy registered [ 0.447511] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.447847] msgmni has been set to 1460 [ 0.450838] bounce: pool size: 64 pages [ 0.450889] io scheduler noop registered [ 0.450911] io scheduler deadline registered [ 0.450974] io scheduler cfq registered (default) [ 0.456649] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 0.458256] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.459259] abb_mpu: 1060 <--> 1210 mV [ 0.459838] abb_ivahd: 1055 <--> 1250 mV [ 0.460452] abb_dspeve: 1055 <--> 1250 mV [ 0.461043] abb_gpu: 1090 <--> 1280 mV [ 0.461961] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.466350] omap_uart 4806a000.serial: no wakeirq for uart0 [ 0.466371] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806a000[0]' [ 0.466621] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 1.608267] console [ttyO0] enabled [ 1.613100] omap_uart 4806c000.serial: no wakeirq for uart0 [ 1.618969] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@4806c000[0]' [ 1.628518] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 1.639031] omap_uart 48020000.serial: no wakeirq for uart0 [ 1.644871] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48020000[0]' [ 1.654397] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.684247] brd: module loaded [ 1.697280] loop: module loaded [ 1.702593] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.714899] usbcore: registered new interface driver asix [ 1.720681] usbcore: registered new interface driver ax88179_178a [ 1.727180] usbcore: registered new interface driver cdc_ether [ 1.733422] usbcore: registered new interface driver smsc95xx [ 1.739550] usbcore: registered new interface driver net1080 [ 1.745595] usbcore: registered new interface driver cdc_subset [ 1.751890] usbcore: registered new interface driver zaurus [ 1.757898] usbcore: registered new interface driver cdc_ncm [ 1.769690] usbcore: registered new interface driver cdc_wdm [ 1.775827] usbcore: registered new interface driver usb-storage [ 1.782244] usbcore: registered new interface driver usbtest [ 1.789498] mousedev: PS/2 mouse device common for all mice [ 1.800198] i2c /dev entries driver [ 1.803902] Driver for 1-wire Dallas network protocol. [ 1.810976] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.820094] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 1.829647] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.836673] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.844121] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 1.853240] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@480b4000[0]' [ 1.862908] omap_hsmmc 480b4000.mmc: pins are not configured from the driver [ 1.905885] ledtrig-cpu: registered to indicate activity on CPUs [ 1.912546] usbcore: registered new interface driver usbhid [ 1.918420] usbhid: USB HID core driver [ 1.923443] oprofile: no performance counters [ 1.928622] oprofile: using timer interrupt. [ 1.933496] TCP: cubic registered [ 1.937039] Initializing XFRM netlink socket [ 1.941600] NET: Registered protocol family 17 [ 1.946349] NET: Registered protocol family 15 [ 1.951196] Key type dns_resolver registered [ 1.955838] omap_voltage_late_init: Voltage driver support not added [ 1.962492] sr_dev_init: Unable to get voltage domain pointer for VDD core [ 1.969731] sr_dev_init: Unable to get voltage domain pointer for VDD mpu [ 1.977458] ThumbEE CPU extension supported. [ 1.981949] Registering SWP/SWPB emulation handler [ 1.987021] SmartReflex Class3 initialized [ 2.011179] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 2.017670] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca [ 2.024341] nand: Micron MT29F2G16ABAEAWP [ 2.028608] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 2.034526] nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled [ 2.040629] omap2-nand: probe of omap2-nand.0 failed with error -22 [ 2.089294] palmas 0-0058: IRQ missing: skipping irq request [ 2.097805] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 2.106911] smps123: 850 <--> 1250 mV at 1060 mV [ 2.114016] smps45: 850 <--> 1150 mV at 1060 mV [ 2.121172] smps6: 850 <--> 1650 mV at 1060 mV [ 2.127935] smps7: 850 <--> 1030 mV at 1030 mV [ 2.134744] smps8: 850 <--> 1250 mV at 1060 mV [ 2.141404] smps9: 1800 mV [ 2.146323] ldo1: 1800 <--> 3300 mV at 3300 mV [ 2.153164] ldo2: 3300 mV [ 2.158196] ldo3: 1800 mV [ 2.162271] LDO4: at 1800 mV [ 2.166424] LDO5: no parameters [ 2.170617] LDO6: no parameters [ 2.174851] LDO7: no parameters [ 2.179155] LDO8: no parameters [ 2.184184] ldo9: 1050 mV [ 2.189357] ldoln: 1800 mV [ 2.194615] ldousb: 3300 mV [ 2.198710] REGEN1: no parameters [ 2.202554] REGEN2: no parameters [ 2.206625] REGEN3: no parameters [ 2.210500] SYSEN1: no parameters [ 2.214333] SYSEN2: no parameters [ 2.218090] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.224481] mmc0: BKOPS_EN bit is not set [ 2.229604] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 2.236558] omap_i2c 48060000.i2c: bus 2 rev0.12 at 3400 kHz [ 2.242746] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.251890] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.264398] mmc0: new high speed MMC card at address 0001 [ 2.271568] mmcblk0: mmc0:0001 MMC04G 3.52 GiB [ 2.276975] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.284939] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB [ 2.291691] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB [ 2.301882] mmcblk0: unknown partition table [ 2.308882] mmcblk0boot1: unknown partition table [ 2.316176] mmcblk0boot0: unknown partition table [ 2.346463] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.353035] sr_init: No PMIC hook to init smartreflex [ 2.358567] sr_init: platform driver register failed for SR [ 2.407326] ldousb: disabling [ 2.411123] ldo9: disabling [ 2.414669] ldo3: disabling [ 2.421404] ldo2: disabling [ 2.427316] Waiting for root device /dev/mmcblk1p2... [ 2.452693] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.463316] mmc1: new high speed SDHC card at address 1234 [ 2.469937] mmcblk1: mmc1:1234 SA08G 7.28 GiB [ 2.476988] mmcblk1: p1 p2 [ 3.479750] kjournald starting. Commit interval 5 seconds [ 4.396730] EXT3-fs (mmcblk1p2): using internal journal [ 4.405781] EXT3-fs (mmcblk1p2): recovery complete [ 4.410794] EXT3-fs (mmcblk1p2): mounted filesystem with ordered data mode [ 4.418067] VFS: Mounted root (ext3 filesystem) on device 179:26. [ 4.428564] devtmpfs: mounted [ 4.432043] Freeing unused kernel memory: 400K (c07b6000 - c081a000) INIT: version 2.88 booting Error opening /dev/fb0: No such file or directory Starting udev [ 5.069846] udevd[806]: starting version 182 [ 7.525708] random: nonblocking pool is initialized [ 8.470964] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. ERROR: could not open directory /lib/modules/3.16.0-rc1-00002-g3e0ca738: No such file or directory WARNING: -e needs -E or -F ERROR: could not open directory /lib/modules/3.16.0-rc1-00002-g3e0ca738: No such file or directory FATAL: could not search modules: No such file or directory Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. ALSA: Restoring mixer settings... Configuring network interfaces... /usr/sbin/alsactl: load_state:1696: No soundcards found... ifconfig: SIOCGIFFLAGS: No such device done. hwclock: can't open '/dev/misc/rtc': No such file or directory Fri Apr 4 09:03:00 UTC 2014 hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 Starting system message bus: dbus. Starting Dropbear SSH server: dropbear. Starting telnet daemon. hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done Starting thttpd. Starting Lighttpd Web Server: lighttpd. 2014-04-04 09:03:00: (log.c.166) server started / Starting Matrix GUI application. *************************************************************** *************************************************************** NOTICE: This file system contains the followin GPLv3 packages: binutils-symlinks binutils gdbserver parted If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Stopping Bootlog daemon: bootlogd. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyO0 Arago 2013.12 dra7xx-evm ttyO0 dra7xx-evm login: