From: Ben Greear <greearb@candelatech.com>
To: Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr>
Cc: Patrick CARNEIRO RODRIGUEZ <p.carneiro@actiasodielec.fr>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: Warning message in bridge mode
Date: Mon, 23 Jun 2014 14:33:34 -0700 [thread overview]
Message-ID: <53A89D2E.6010708@candelatech.com> (raw)
In-Reply-To: <EE97821C81277E459BEA5C6384C6F241012F10997914@srvexch01.SODIELEC.local>
On 06/23/2014 02:03 AM, Vu Hai NGUYEN wrote:
> I get this warning message when doing my test with iperf in my AP:
> br0: received packet on wlan0.sta1 with own address as source address
>
> My STA is set up in bridge network (promiscuous mode) and using the firmware of CT.
> http://www.candelatech.com/downloads/firmware-2-ct-community-6.bin
> When my STA is associated successfully with my AP, the interface "wlan0.sta1" is created
> in my AP. And I have this config:
> br0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
> eth0 Link encap:Ethernet HWaddr 00:10:02:0F:C5:05
> wlan0 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
> wlan0.sta1 Link encap:Ethernet HWaddr 04:F0:21:0E:38:C6
>
> I think that the warning message is because my interface br0 and wlan0.sta1 have the same
> mac address. And it decrease the performance of the rate (I get higher rate with iperf when my
> STA is set up in router network (not enter promiscuous mode). I can not do the test with the
> official firmware cause it crashed in promiscuous mode.
> So I wonder that if anyone get the same issue like me?
Why do you have the same MAC for wlan0 and wlan0.sta1? What are those interfaces
exactly? It is normal for the bridge to have same MAC as one of the interfaces
it contains.
> I can use it for my STA in promiscuous mode and connect to my AP on channels DFS,
> Sometimes I get this message "wlan0: received packet with own address as source address".
> I'm not sure that it is your firmware issue or because of my network configuration.
> I'll try to figure it out and report to you if it relates to your firmware.
I doubt my firmware has any impact on this particular problem.
Thanks,
Ben
>
> Thanks,
> NGUYEN Vu Hai
> Acita-Sodielec
> Route de Mayres - B.P. 9
> 12100 St GEORGES DE LUZENCON
> FRANCE
>
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-06-23 21:33 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 16:18 [PATCH v2 2/2] ath10k: support get/set antenna configurations greearb
2014-05-08 16:18 ` greearb
2014-05-12 15:43 ` RE : " Vu Hai NGUYEN
2014-05-12 16:17 ` Ben Greear
2014-05-13 0:49 ` Avery Pennarun
2014-05-13 3:36 ` Ben Greear
2014-05-13 13:08 ` ath10k: set channel by command "iw" not from hostapd and DFS support of firmware-2.bin_10.1.467.2-1 Vu Hai NGUYEN
2014-05-14 9:32 ` Matti Laakso
2014-05-14 11:56 ` RE : " Vu Hai NGUYEN
2014-05-15 8:02 ` Matti Laakso
2014-05-15 10:41 ` RE : " Vu Hai NGUYEN
2014-05-15 11:11 ` Janusz Dziedzic
2014-05-15 13:36 ` RE : " Vu Hai NGUYEN
2014-05-15 16:08 ` Vu Hai NGUYEN
2014-05-16 6:52 ` Janusz Dziedzic
2014-05-16 7:01 ` RE : " Vu Hai NGUYEN
2014-05-16 7:35 ` Janusz Dziedzic
2014-05-16 7:46 ` Bartosz Markowski
2014-05-16 8:03 ` RE : " Vu Hai NGUYEN
2014-05-16 8:13 ` Bartosz Markowski
2014-05-16 9:41 ` RE : " Vu Hai NGUYEN
2014-05-16 11:39 ` Janusz Dziedzic
2014-05-16 11:50 ` Janusz Dziedzic
2014-05-16 13:17 ` RE : RE " Vu Hai NGUYEN
2014-05-16 17:40 ` Janusz Dziedzic
2014-05-19 9:39 ` Vu Hai NGUYEN
2014-05-19 10:42 ` Janusz Dziedzic
2014-05-16 13:00 ` RE : RE : RE : RE : " Kalle Valo
2014-05-16 14:03 ` Janusz Dziedzic
2014-05-16 14:12 ` Kalle Valo
2014-05-16 7:41 ` Matti Laakso
2014-05-15 7:07 ` ath10k: firmware crash in station mode Vu Hai NGUYEN
2014-05-15 7:53 ` Janusz Dziedzic
2014-05-15 10:57 ` Michal Kazior
2014-05-15 13:27 ` RE : " Vu Hai NGUYEN
2014-05-19 6:59 ` Michal Kazior
2014-05-19 9:47 ` RE : " Vu Hai NGUYEN
2014-05-19 12:51 ` Michal Kazior
2014-05-20 6:44 ` ath10k: firmware crash in station mode & problem DFS Vu Hai NGUYEN
2014-05-20 8:15 ` RE : " Vu Hai NGUYEN
2014-05-20 17:59 ` Janusz Dziedzic
2014-05-21 9:43 ` RE : " Vu Hai NGUYEN
2014-05-21 14:03 ` Janusz Dziedzic
2014-05-22 7:54 ` RE : " Vu Hai NGUYEN
2014-05-22 8:06 ` Vu Hai NGUYEN
2014-05-22 12:18 ` Janusz Dziedzic
2014-05-22 12:25 ` Janusz Dziedzic
2014-05-22 14:40 ` RE : " Vu Hai NGUYEN
2014-05-22 14:45 ` Vu Hai NGUYEN
2014-05-22 16:44 ` RE : " Kalle Valo
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E8@srvexch01.SODIELEC.local>
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E9@srvexch01.SODIELEC.local>
2014-05-23 7:40 ` Kalle Valo
2014-05-23 7:52 ` RE : " Vu Hai NGUYEN
2014-05-26 8:34 ` Janusz Dziedzic
2014-05-26 13:45 ` Vu Hai NGUYEN
[not found] ` <CAFED-j=i5uhjqaJYL+dm_ui48EFeHG3isHYSSSo=+3gk-Wa5YQ@mail.gmail.com>
2014-05-27 6:50 ` Janusz Dziedzic
2014-05-27 9:21 ` Vu Hai NGUYEN
2014-05-27 16:36 ` Vu Hai NGUYEN
2014-05-28 15:25 ` Vu Hai NGUYEN
2014-05-28 15:49 ` Ben Greear
2014-05-30 9:10 ` Vu Hai NGUYEN
2014-05-30 14:49 ` Ben Greear
2014-06-02 16:16 ` Vu Hai NGUYEN
2014-06-02 16:48 ` Ben Greear
2014-06-03 6:51 ` Vu Hai NGUYEN
2014-06-04 4:14 ` Ben Greear
2014-06-04 9:20 ` Vu Hai NGUYEN
2014-06-04 16:20 ` Ben Greear
2014-06-04 21:40 ` Ben Greear
2014-06-05 8:41 ` RE : " Vu Hai NGUYEN
2014-06-05 15:43 ` Ben Greear
2014-06-05 17:33 ` Ben Greear
2014-06-06 9:05 ` RE : " Vu Hai NGUYEN
2014-06-06 15:50 ` Ben Greear
2014-06-10 7:15 ` Vu Hai NGUYEN
2014-06-10 15:51 ` Ben Greear
2014-06-11 7:19 ` Vu Hai NGUYEN
2014-06-11 17:05 ` Ben Greear
2014-06-12 8:48 ` RE : " Vu Hai NGUYEN
2014-06-12 17:54 ` Ben Greear
2014-06-12 20:22 ` Ben Greear
2014-06-13 8:50 ` Vu Hai NGUYEN
2014-06-13 14:34 ` Ben Greear
2014-06-13 17:04 ` Ben Greear
2014-06-16 7:16 ` Vu Hai NGUYEN
2014-06-16 14:47 ` Ben Greear
2014-06-17 7:25 ` Vu Hai NGUYEN
2014-06-23 9:03 ` Warning message in bridge mode Vu Hai NGUYEN
2014-06-23 21:33 ` Ben Greear [this message]
2014-06-23 21:47 ` Bruno Antunes
2014-06-24 7:39 ` RE : " Vu Hai NGUYEN
2014-06-24 15:10 ` Ben Greear
2014-06-26 14:17 ` Vu Hai NGUYEN
2014-06-26 14:34 ` Ben Greear
2014-06-27 15:52 ` Vu Hai NGUYEN
2014-06-27 15:59 ` Ben Greear
2014-06-30 8:14 ` Vu Hai NGUYEN
2014-06-07 0:28 ` RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS Ben Greear
2014-05-28 17:19 ` Janusz Dziedzic
2014-05-28 18:40 ` Janusz Dziedzic
2014-05-30 11:55 ` Vu Hai NGUYEN
2014-06-02 7:03 ` Janusz Dziedzic
2014-05-23 7:18 ` Michal Kazior
2014-05-23 9:15 ` RE : RE : ath10k: firmware crash in station mode Yeoh Chun-Yeow
2014-05-23 11:35 ` RE : " Vu Hai NGUYEN
2014-05-23 14:27 ` Yeoh Chun-Yeow
2014-05-23 14:55 ` TR " Vu Hai NGUYEN
2014-05-23 15:36 ` Yeoh Chun-Yeow
2014-05-23 16:03 ` Ben Greear
2014-05-24 6:29 ` Tim Harvey
2014-05-24 16:14 ` Ben Greear
2014-05-27 19:13 ` Ben Greear
2014-05-25 7:26 ` Kalle Valo
2014-05-24 5:49 ` Tim Harvey
2014-05-24 16:46 ` Yeoh Chun-Yeow
2014-05-13 0:52 ` [PATCH] ath10k: support get/set antenna configurations Avery Pennarun
2014-05-13 18:10 ` Kalle Valo
2014-05-13 18:15 ` Ben Greear
2014-05-13 21:03 ` Avery Pennarun
2014-05-14 12:28 ` Kalle Valo
2014-05-15 4:04 ` Yeoh Chun-Yeow
2014-05-15 5:47 ` Avery Pennarun
2014-05-15 6:51 ` Yeoh Chun-Yeow
2014-05-15 7:11 ` Kalle Valo
2014-05-13 21:11 ` [PATCH v3] " Avery Pennarun
2014-05-14 6:20 ` Yeoh Chun-Yeow
2014-05-14 6:21 ` Avery Pennarun
2014-05-14 6:25 ` Yeoh Chun-Yeow
2014-05-14 7:18 ` Avery Pennarun
2014-05-14 7:22 ` Yeoh Chun-Yeow
2014-05-14 7:33 ` Yeoh Chun-Yeow
2014-05-16 12:30 ` Kalle Valo
2014-05-16 13:00 ` Ben Greear
2014-05-22 16:56 ` Kalle Valo
2014-05-13 17:50 ` RE : [PATCH v2 2/2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A89D2E.6010708@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
--cc=p.carneiro@actiasodielec.fr \
--cc=vh.nguyen@actiasodielec.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.