diff for duplicates of <53AA2EF6.6070604@ti.com> diff --git a/a/1.txt b/N1/1.txt index 0539b68..1cc2d4d 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,11 +2,11 @@ On 06/23/2014 01:20 PM, Felipe Balbi wrote: > Add support for TI's AM437x StarterKit Evaluation > Module. > -> Cc: Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org> -> Cc: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org> -> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> +> Cc: Josh Elliot <jelliott@ti.com> +> Cc: Darren Etheridge <detheridge@ti.com> +> Signed-off-by: Felipe Balbi <balbi@ti.com> -Tested-by: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org> +Tested-by: Darren Etheridge <detheridge@ti.com> I tested with omap2plus_defconfig + additionally enabling OMAPDSS and Backlight in .config. Working great for me with ethernet, sdcard, lcd @@ -17,3 +17,10 @@ Felipe pointed to in the cover letter for this series and obviously running on an AM437x StarterKit EVM. Darren +-------------- next part -------------- +A non-text attachment was scrubbed... +Name: dmesg-am437x-sk.log +Type: text/x-log +Size: 21088 bytes +Desc: not available +URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140624/05b3e521/attachment-0001.bin> diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index 92bd70e..0000000 --- a/a/2.hdr +++ /dev/null @@ -1,3 +0,0 @@ -Content-Type: text/x-log; name="dmesg-am437x-sk.log" -Content-Transfer-Encoding: 8bit -Content-Disposition: attachment; filename="dmesg-am437x-sk.log" diff --git a/a/2.txt b/a/2.txt deleted file mode 100644 index c5b8e77..0000000 --- a/a/2.txt +++ /dev/null @@ -1,341 +0,0 @@ -[ 0.000000] Booting Linux on physical CPU 0x0 -[ 0.000000] Linux version 3.16.0-rc1-next-20140617-00935-g2072735 (darrene@build-laptop) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #5 SMP Tue Jun 24 17:42:32 CDT 2014 -[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d -[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache -[ 0.000000] Machine model: TI AM437x SK EVM -[ 0.000000] cma: CMA: reserved 16 MiB at ae800000 -[ 0.000000] Memory policy: Data cache writeback -[ 0.000000] On node 0 totalpages: 262144 -[ 0.000000] free_area_init_node: node 0, pgdat c0956880, node_mem_map edff1000 -[ 0.000000] Normal zone: 1520 pages used for memmap -[ 0.000000] Normal zone: 0 pages reserved -[ 0.000000] Normal zone: 194560 pages, LIFO batch:31 -[ 0.000000] HighMem zone: 528 pages used for memmap -[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15 -[ 0.000000] CPU: All CPU(s) started in SVC mode. -[ 0.000000] AM437x ES1.1 (sgx neon ) -[ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000 -[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000 -[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 -[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines -[ 0.000000] OMAP L2C310: ROM does not support power control setting -[ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled -[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB -[ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x7e430000 -[ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb5000 s14336 r8192 d14336 u36864 -[ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096 -[ 0.000000] pcpu-alloc: [0] 0 -[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 -[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait -[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) -[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) -[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -[ 0.000000] Memory: 1005092K/1048576K available (6039K kernel code, 705K rwdata, 2388K rodata, 414K init, 8220K bss, 43484K reserved, 270336K highmem) -[ 0.000000] Virtual kernel memory layout: -[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) -[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) -[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) -[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) -[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) -[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) -[ 0.000000] .text : 0xc0008000 - 0xc0843100 (8429 kB) -[ 0.000000] .init : 0xc0844000 - 0xc08ab800 ( 414 kB) -[ 0.000000] .data : 0xc08ac000 - 0xc095c498 ( 706 kB) -[ 0.000000] .bss : 0xc095c498 - 0xc11635e0 (8221 kB) -[ 0.000000] Hierarchical RCU implementation. -[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. -[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 -[ 0.000000] NR_IRQS:16 nr_irqs:16 16 -[ 0.000000] GIC CPU mask not found - kernel will fail to boot. -[ 0.000000] GIC CPU mask not found - kernel will fail to boot. -[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz -[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns -[ 0.000062] OMAP clocksource: timer1 at 24000000 Hz -[ 0.000643] Console: colour dummy device 80x30 -[ 0.000680] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar -[ 0.000692] ... MAX_LOCKDEP_SUBCLASSES: 8 -[ 0.000702] ... MAX_LOCK_DEPTH: 48 -[ 0.000711] ... MAX_LOCKDEP_KEYS: 8191 -[ 0.000720] ... CLASSHASH_SIZE: 4096 -[ 0.000729] ... MAX_LOCKDEP_ENTRIES: 32768 -[ 0.000738] ... MAX_LOCKDEP_CHAINS: 65536 -[ 0.000747] ... CHAINHASH_SIZE: 32768 -[ 0.000756] memory used by lock dependency info: 5167 kB -[ 0.000765] per task-struct memory footprint: 1152 bytes -[ 0.000804] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664) -[ 0.119229] pid_max: default: 32768 minimum: 301 -[ 0.119549] Security Framework initialized -[ 0.119650] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) -[ 0.119666] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) -[ 0.121422] CPU: Testing write buffer coherency: ok -[ 0.122355] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 -[ 0.122459] Setting up static identity map for 0x805b9230 - 0x805b92a0 -[ 0.125160] Brought up 1 CPUs -[ 0.125179] SMP: Total of 1 processors activated. -[ 0.125193] CPU: All CPU(s) started in SVC mode. -[ 0.127382] devtmpfs: initialized -[ 0.137997] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 -[ 0.171344] omap_hwmod: tptc0 using broken dt data from edma -[ 0.171647] omap_hwmod: tptc1 using broken dt data from edma -[ 0.171925] omap_hwmod: tptc2 using broken dt data from edma -[ 0.236581] omap_hwmod: dss_dispc: cannot be enabled for reset (3) -[ 0.239887] omap_hwmod: dss_rfbi: cannot be enabled for reset (3) -[ 0.241769] pinctrl core: initialized pinctrl subsystem -[ 0.243762] regulator-dummy: no parameters -[ 0.266686] NET: Registered protocol family 16 -[ 0.271145] DMA: preallocated 256 KiB pool for atomic coherent allocations -[ 0.272944] cpuidle: using governor ladder -[ 0.272992] cpuidle: using governor menu -[ 0.287209] platform 49000000.edma: alias fck already exists -[ 0.287293] platform 49000000.edma: alias fck already exists -[ 0.287314] platform 49000000.edma: alias fck already exists -[ 0.288633] platform 44e3e000.rtc: Cannot lookup hwmod 'rtc' -[ 0.290482] gpiochip_add: registered GPIOs 0 to 31 on device: gpio -[ 0.291100] OMAP GPIO hardware version 0.1 -[ 0.292129] gpiochip_add: registered GPIOs 32 to 63 on device: gpio -[ 0.293422] gpiochip_add: registered GPIOs 64 to 95 on device: gpio -[ 0.297098] platform 53701000.des: Cannot lookup hwmod 'des' -[ 0.303135] No ATAGs? -[ 0.303220] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. -[ 0.303256] hw-breakpoint: maximum watchpoint size is 4 bytes. -[ 0.338263] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver -[ 0.338869] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' -[ 0.339398] V5_0D: 5000 mV -[ 0.339537] reg-fixed-voltage fixedregulator@0: Failed to find supply vin -[ 0.340842] reg-fixed-voltage fixedregulator@0: Failed to register regulator: -517 -[ 0.340893] platform fixedregulator@0: Driver reg-fixed-voltage requests probe deferral -[ 0.341008] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]' -[ 0.341286] VBUS_USB: 5000 mV -[ 0.341401] reg-fixed-voltage fixedregulator@1: Failed to find supply vin -[ 0.341672] reg-fixed-voltage fixedregulator@1: Failed to register regulator: -517 -[ 0.341709] platform fixedregulator@1: Driver reg-fixed-voltage requests probe deferral -[ 0.344303] SCSI subsystem initialized -[ 0.344904] usbcore: registered new interface driver usbfs -[ 0.345050] usbcore: registered new interface driver hub -[ 0.347504] usbcore: registered new device driver usb -[ 0.348353] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/i2c0_pins, deferring probe -[ 0.348397] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral -[ 0.348454] omap_i2c 4802a000.i2c: could not find pctldev for node /pinmux@44e10800/i2c1_pins, deferring probe -[ 0.348478] platform 4802a000.i2c: Driver omap_i2c requests probe deferral -[ 0.349489] Advanced Linux Sound Architecture Driver Initialized. -[ 0.352214] Switched to clocksource timer1 -[ 0.459745] NET: Registered protocol family 2 -[ 0.461308] TCP established hash table entries: 8192 (order: 3, 32768 bytes) -[ 0.461502] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) -[ 0.463402] TCP: Hash tables configured (established 8192 bind 8192) -[ 0.463731] TCP: reno registered -[ 0.463793] UDP hash table entries: 512 (order: 3, 40960 bytes) -[ 0.464052] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) -[ 0.465147] NET: Registered protocol family 1 -[ 0.466781] RPC: Registered named UNIX socket transport module. -[ 0.466822] RPC: Registered udp transport module. -[ 0.466834] RPC: Registered tcp transport module. -[ 0.466846] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.470306] futex hash table entries: 256 (order: 2, 16384 bytes) -[ 0.474374] VFS: Disk quotas dquot_6.5.2 -[ 0.474486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) -[ 0.476580] NFS: Registering the id_resolver key type -[ 0.476868] Key type id_resolver registered -[ 0.476904] Key type id_legacy registered -[ 0.477049] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. -[ 0.477412] msgmni has been set to 1467 -[ 0.481434] bounce: pool size: 64 pages -[ 0.481605] io scheduler noop registered -[ 0.481631] io scheduler deadline registered -[ 0.481696] io scheduler cfq registered (default) -[ 0.485979] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 size 796 -[ 0.490000] pwm-backlight backlight: GPIO lookup for consumer enable -[ 0.490022] pwm-backlight backlight: using device tree for GPIO lookup -[ 0.490040] of_get_named_gpiod_flags: can't parse gpios property of node '/backlight[0]' -[ 0.490054] of_get_named_gpiod_flags: can't parse gpios property of node '/backlight[0]' -[ 0.490067] pwm-backlight backlight: using lookup tables for GPIO lookup -[ 0.490183] pwm-backlight backlight: lookup for GPIO enable failed -[ 0.490289] backlight supply power not found, using dummy regulator -[ 0.492682] DSS: set fck to 200000000 -[ 0.493245] DSS: dss_runtime_get -[ 0.493292] DSS: dss_restore_context -[ 0.493336] OMAP DSS rev 2.0 -[ 0.493346] DSS: dss_runtime_put -[ 0.493360] DSS: dss_save_context -[ 0.493370] DSS: context saved -[ 0.493854] DISPC: dispc_runtime_get -[ 0.493895] DSS: dss_restore_context -[ 0.493907] DSS: context restored -[ 0.493941] DISPC: dispc_restore_context -[ 0.493968] omapdss_dispc 4832a400.dispc: OMAP DISPC rev 3.0 -[ 0.493979] DISPC: dispc_runtime_put -[ 0.493996] DISPC: dispc_save_context -[ 0.494032] DISPC: context saved -[ 0.495376] panel-dpi display: GPIO lookup for consumer enable -[ 0.495397] panel-dpi display: using device tree for GPIO lookup -[ 0.495451] of_get_named_gpiod_flags exited with status 0 -[ 0.496831] DISPC: dispc_runtime_get -[ 0.497089] DISPC: dispc_runtime_put -[ 0.497111] DISPC: dispc_save_context -[ 0.497148] DISPC: context saved -[ 0.497358] DISPC: dispc_runtime_get -[ 0.497509] DISPC: dispc_runtime_put -[ 0.497548] DISPC: dispc_save_context -[ 0.497579] DISPC: context saved -[ 0.497604] DISPC: dispc_runtime_get -[ 0.497635] DISPC: dispc_runtime_put -[ 0.497650] DISPC: dispc_save_context -[ 0.497676] DISPC: context saved -[ 0.497696] DISPC: dispc_runtime_get -[ 0.497723] DISPC: dispc_runtime_put -[ 0.497737] DISPC: dispc_save_context -[ 0.497760] DISPC: context saved -[ 0.497960] DSS: dss_save_context -[ 0.498009] DSS: context saved -[ 0.501233] APPLY: omap_dss_mgr_apply(lcd) -[ 0.502209] Console: switching to colour frame buffer device 60x34 -[ 0.504855] APPLY: omap_dss_mgr_apply(lcd) -[ 0.504885] APPLY: omap_dss_mgr_apply(lcd) -[ 0.504900] DPI: dpi_set_timings -[ 0.505078] DISPC: dispc_runtime_get -[ 0.505210] DSS: dss_restore_context -[ 0.505225] DSS: context restored -[ 0.505552] DSS: set fck to 198000000 -[ 0.508202] APPLY: writing mgr 0 regs -[ 0.508252] APPLY: writing ovl 0 regs -[ 0.508273] DISPC: dispc_ovl_setup 0, pa 0xae840000, pa_uv 0x00000000, sw 480, 0,0, 480x272 -> 480x272, cmode 40, rot 0, mir 0, chan 0 repl 1 -[ 0.508291] DISPC: calc_rot(0): scrw 480, 480x272 -[ 0.508304] DISPC: offset0 0, offset1 0, row_inc 1, pix_inc 1 -[ 0.508318] DISPC: 0,0 480x272 -> 480x272 -[ 0.508332] APPLY: writing ovl 0 regs extra -[ 0.508342] DISPC: dispc_enable_plane 0, 1 -[ 0.508355] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023 -[ 0.508364] APPLY: writing ovl 1 regs -[ 0.508372] APPLY: writing ovl 1 regs extra -[ 0.508381] APPLY: writing ovl 2 regs -[ 0.508389] APPLY: writing ovl 2 regs extra -[ 0.508398] APPLY: writing mgr 0 regs extra -[ 0.508408] DISPC: channel 0 xres 480 yres 272 -[ 0.508419] DISPC: pck 9000000 -[ 0.508429] DISPC: hsw 4 hfp 8 hbp 43 vsw 10 vfp 4 vbp 12 -[ 0.508440] DISPC: vsync_level 1 hsync_level 1 data_pclk_edge 1 de_level 0 sync_pclk_edge 0 -[ 0.508449] DISPC: hsync 16822Hz, vsync 56Hz -[ 0.508461] DISPC: lck = 198000000 (1) -[ 0.508470] DISPC: pck = 9000000 (22) -[ 0.508743] omapfb omapfb: using display 'lcd' mode 480x272 -[ 0.510994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled -[ 0.516430] omap_uart 44e09000.serial: no wakeirq for uart0 -[ 0.516467] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]' -[ 0.516488] omap_uart 44e09000.serial: No clock speed specified: using default: 48000000 -[ 0.517035] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 104, base_baud = 3000000) is a OMAP UART0 -[ 1.369909] console [ttyO0] enabled -[ 1.393306] brd: module loaded -[ 1.407599] loop: module loaded -[ 1.413502] mtdoops: mtd device (mtddev=name/number) must be supplied -[ 1.421194] ti-qspi 47900000.qspi: memory mapped resource not required -[ 1.519456] usbcore: registered new interface driver asix -[ 1.525443] usbcore: registered new interface driver ax88179_178a -[ 1.531942] usbcore: registered new interface driver cdc_ether -[ 1.538249] usbcore: registered new interface driver smsc95xx -[ 1.544429] usbcore: registered new interface driver net1080 -[ 1.550443] usbcore: registered new interface driver cdc_subset -[ 1.556778] usbcore: registered new interface driver zaurus -[ 1.562813] usbcore: registered new interface driver cdc_ncm -[ 1.570817] usbcore: registered new interface driver cdc_wdm -[ 1.577089] usbcore: registered new interface driver usb-storage -[ 1.583590] usbcore: registered new interface driver usbtest -[ 1.591744] mousedev: PS/2 mouse device common for all mice -[ 1.600240] omap_rtc 44e3e000.rtc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info -[ 1.610515] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 -[ 1.618113] 44e3e000.rtc: already running -[ 1.622972] i2c /dev entries driver -[ 1.626696] Driver for 1-wire Dallas network protocol. -[ 1.636377] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec -[ 1.644980] of_get_named_gpiod_flags exited with status 0 -[ 1.645005] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]' -[ 1.646047] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 -[ 1.653419] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral -[ 1.661412] of_get_named_gpiod_flags exited with status 0 -[ 1.661441] of_get_named_gpiod_flags exited with status 0 -[ 1.661461] of_get_named_gpiod_flags exited with status 0 -[ 1.661479] of_get_named_gpiod_flags exited with status 0 -[ 1.661501] of_get_named_gpiod_flags exited with status 0 -[ 1.662298] of_get_named_gpiod_flags exited with status 0 -[ 1.662599] of_get_named_gpiod_flags exited with status 0 -[ 1.662851] of_get_named_gpiod_flags exited with status 0 -[ 1.663539] ledtrig-cpu: registered to indicate activity on CPUs -[ 1.670316] usbcore: registered new interface driver usbhid -[ 1.676218] usbhid: USB HID core driver -[ 1.686465] davinci_evm sound: ASoC: CODEC (null) not registered -[ 1.693258] davinci_evm sound: snd_soc_register_card failed (-517) -[ 1.699796] platform sound: Driver davinci_evm requests probe deferral -[ 1.707389] oprofile: no performance counters -[ 1.712705] oprofile: using timer interrupt. -[ 1.717756] TCP: cubic registered -[ 1.721275] Initializing XFRM netlink socket -[ 1.725922] NET: Registered protocol family 17 -[ 1.730642] NET: Registered protocol family 15 -[ 1.735760] Key type dns_resolver registered -[ 1.740441] omap_voltage_late_init: Voltage driver support not added -[ 1.747176] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize -[ 1.755674] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize -[ 1.765097] ThumbEE CPU extension supported. -[ 1.769618] Registering SWP/SWPB emulation handler -[ 1.774719] SmartReflex Class3 initialized -[ 1.786932] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' -[ 1.787552] V5_0D: 5000 mV -[ 1.790632] reg-fixed-voltage fixedregulator@0: Failed to find supply vin -[ 1.798436] reg-fixed-voltage fixedregulator@0: Failed to register regulator: -517 -[ 1.806537] platform fixedregulator@0: Driver reg-fixed-voltage requests probe deferral -[ 1.815438] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]' -[ 1.815766] VBUS_USB: 5000 mV -[ 1.819088] reg-fixed-voltage fixedregulator@1: Failed to find supply vin -[ 1.826567] reg-fixed-voltage fixedregulator@1: Failed to register regulator: -517 -[ 1.834559] platform fixedregulator@1: Driver reg-fixed-voltage requests probe deferral -[ 1.864401] vdd_core: 920 <--> 1140 mV at 1100 mV -[ 1.872723] vdd_mpu: 920 <--> 1375 mV at 1330 mV -[ 1.880067] vdds_ddr: 1350 mV -[ 1.885953] v3_3d: 3300 mV -[ 1.891406] v1_8d: 1800 mV -[ 1.895981] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 400 kHz -[ 1.907140] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/i2c@4802a000/tlv320aic3106@1b[0]' -[ 1.909258] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 400 kHz -[ 1.915920] of_get_named_gpiod_flags exited with status 0 -[ 1.915947] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]' -[ 1.956837] davinci_evm sound: tlv320aic3x-hifi <-> 4803c000.mcasp mapping ok -[ 1.985824] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]' -[ 1.986188] V5_0D: 5000 mV -[ 1.989231] V5_0D: supplied by v3_3d -[ 1.993646] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]' -[ 1.993982] VBUS_USB: 5000 mV -[ 1.997291] VBUS_USB: supplied by V5_0D -[ 2.029373] mmc0: host does not support reading read-only switch. assuming write-enable. -[ 2.039924] mmc0: new high speed SDHC card at address 0001 -[ 2.049058] mmcblk0: mmc0:0001 00000 14.6 GiB -[ 2.058925] mmcblk0: p1 p2 -[ 2.062698] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 -[ 2.069120] davinci_mdio 4a101000.mdio: detected phy mask ffffffcf -[ 2.081905] libphy: 4a101000.mdio: probed -[ 2.086292] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driver unknown -[ 2.094745] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driver unknown -[ 2.104147] cpsw 4a100000.ethernet: Detected MACID = 34:b1:f7:31:45:4b -[ 2.113009] cpsw 4a100000.ethernet: cpsw: Detected MACID = 34:b1:f7:31:45:4d -[ 2.122132] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) -[ 2.131167] sr_init: No PMIC hook to init smartreflex -[ 2.136698] sr_init: platform driver register failed for SR -[ 2.156224] ALSA device list: -[ 2.159357] #0: AM437x-SK-EVM -[ 2.322629] EXT4-fs (mmcblk0p2): recovery complete -[ 2.329912] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) -[ 2.338573] VFS: Mounted root (ext4 filesystem) on device 179:2. -[ 2.354804] devtmpfs: mounted -[ 2.358353] Freeing unused kernel memory: 412K (c0844000 - c08ab000) ->[ 3.032245] udevd[783]: starting version 182 -[ 4.003482] lis3lv02d: 16 bits lis331dlh sensor found -[ 4.142890] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0 -[ 4.340037] of_get_named_gpiod_flags exited with status 0 -[ 4.340072] of_get_named_gpiod_flags exited with status 0 -[ 4.340090] of_get_named_gpiod_flags exited with status 0 -[ 4.340110] of_get_named_gpiod_flags exited with status 0 -[ 4.341037] input: matrix_keypad@0 as /devices/matrix_keypad@0/input/input1 -[ 7.454529] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. -[ 8.000585] random: nonblocking pool is initialized -[ 8.103464] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered -[ 9.099669] net eth0: initializing cpsw version 1.15 (0) -[ 9.182898] net eth0: phy found : id is : 0x221621 -[ 13.183101] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx diff --git a/a/content_digest b/N1/content_digest index f9d3963..f535920 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,34 +1,20 @@ "ref\01403547659-24558-1-git-send-email-balbi@ti.com\0" "ref\01403547659-24558-3-git-send-email-balbi@ti.com\0" - "ref\01403547659-24558-3-git-send-email-balbi-l0cyMroinI0@public.gmane.org\0" - "From\0Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\0" - "Subject\0Re: [PATCH v3 2/2] arm: dts: add support for AM437x StarterKit\0" + "From\0detheridge@ti.com (Darren Etheridge)\0" + "Subject\0[PATCH v3 2/2] arm: dts: add support for AM437x StarterKit\0" "Date\0Tue, 24 Jun 2014 21:07:50 -0500\0" - "To\0Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>" - " Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\0" - "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org> - Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> - r.sricharan-l0cyMroinI0@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Linux OMAP Mailing List <linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Linux ARM Kernel Mailing List <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - " Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org>\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "On 06/23/2014 01:20 PM, Felipe Balbi wrote:\n" "> Add support for TI's AM437x StarterKit Evaluation\n" "> Module.\n" ">\n" - "> Cc: Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\n" - "> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>\n" + "> Cc: Josh Elliot <jelliott@ti.com>\n" + "> Cc: Darren Etheridge <detheridge@ti.com>\n" + "> Signed-off-by: Felipe Balbi <balbi@ti.com>\n" "\n" - "Tested-by: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\n" + "Tested-by: Darren Etheridge <detheridge@ti.com>\n" "\n" "I tested with omap2plus_defconfig + additionally enabling OMAPDSS and \n" "Backlight in .config. Working great for me with ethernet, sdcard, lcd \n" @@ -38,350 +24,13 @@ "Felipe pointed to in the cover letter for this series and obviously \n" "running on an AM437x StarterKit EVM.\n" "\n" - Darren - "\01:2\0" - "fn\0dmesg-am437x-sk.log\0" - "b\0" - "[ 0.000000] Booting Linux on physical CPU 0x0\n" - "[ 0.000000] Linux version 3.16.0-rc1-next-20140617-00935-g2072735 (darrene@build-laptop) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #5 SMP Tue Jun 24 17:42:32 CDT 2014\n" - "[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d\n" - "[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache\n" - "[ 0.000000] Machine model: TI AM437x SK EVM\n" - "[ 0.000000] cma: CMA: reserved 16 MiB at ae800000\n" - "[ 0.000000] Memory policy: Data cache writeback\n" - "[ 0.000000] On node 0 totalpages: 262144\n" - "[ 0.000000] free_area_init_node: node 0, pgdat c0956880, node_mem_map edff1000\n" - "[ 0.000000] Normal zone: 1520 pages used for memmap\n" - "[ 0.000000] Normal zone: 0 pages reserved\n" - "[ 0.000000] Normal zone: 194560 pages, LIFO batch:31\n" - "[ 0.000000] HighMem zone: 528 pages used for memmap\n" - "[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15\n" - "[ 0.000000] CPU: All CPU(s) started in SVC mode.\n" - "[ 0.000000] AM437x ES1.1 (sgx neon )\n" - "[ 0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e430000\n" - "[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3e430000\n" - "[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9\n" - "[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines\n" - "[ 0.000000] OMAP L2C310: ROM does not support power control setting\n" - "[ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled\n" - "[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB\n" - "[ 0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x7e430000\n" - "[ 0.000000] PERCPU: Embedded 9 pages/cpu @edfb5000 s14336 r8192 d14336 u36864\n" - "[ 0.000000] pcpu-alloc: s14336 r8192 d14336 u36864 alloc=9*4096\n" - "[ 0.000000] pcpu-alloc: [0] 0\n" - "[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624\n" - "[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\n" - "[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)\n" - "[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)\n" - "[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)\n" - "[ 0.000000] Memory: 1005092K/1048576K available (6039K kernel code, 705K rwdata, 2388K rodata, 414K init, 8220K bss, 43484K reserved, 270336K highmem)\n" - "[ 0.000000] Virtual kernel memory layout:\n" - "[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)\n" - "[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)\n" - "[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)\n" - "[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)\n" - "[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)\n" - "[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)\n" - "[ 0.000000] .text : 0xc0008000 - 0xc0843100 (8429 kB)\n" - "[ 0.000000] .init : 0xc0844000 - 0xc08ab800 ( 414 kB)\n" - "[ 0.000000] .data : 0xc08ac000 - 0xc095c498 ( 706 kB)\n" - "[ 0.000000] .bss : 0xc095c498 - 0xc11635e0 (8221 kB)\n" - "[ 0.000000] Hierarchical RCU implementation.\n" - "[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.\n" - "[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1\n" - "[ 0.000000] NR_IRQS:16 nr_irqs:16 16\n" - "[ 0.000000] GIC CPU mask not found - kernel will fail to boot.\n" - "[ 0.000000] GIC CPU mask not found - kernel will fail to boot.\n" - "[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz\n" - "[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns\n" - "[ 0.000062] OMAP clocksource: timer1 at 24000000 Hz\n" - "[ 0.000643] Console: colour dummy device 80x30\n" - "[ 0.000680] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n" - "[ 0.000692] ... MAX_LOCKDEP_SUBCLASSES: 8\n" - "[ 0.000702] ... MAX_LOCK_DEPTH: 48\n" - "[ 0.000711] ... MAX_LOCKDEP_KEYS: 8191\n" - "[ 0.000720] ... CLASSHASH_SIZE: 4096\n" - "[ 0.000729] ... MAX_LOCKDEP_ENTRIES: 32768\n" - "[ 0.000738] ... MAX_LOCKDEP_CHAINS: 65536\n" - "[ 0.000747] ... CHAINHASH_SIZE: 32768\n" - "[ 0.000756] memory used by lock dependency info: 5167 kB\n" - "[ 0.000765] per task-struct memory footprint: 1152 bytes\n" - "[ 0.000804] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)\n" - "[ 0.119229] pid_max: default: 32768 minimum: 301\n" - "[ 0.119549] Security Framework initialized\n" - "[ 0.119650] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" - "[ 0.119666] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" - "[ 0.121422] CPU: Testing write buffer coherency: ok\n" - "[ 0.122355] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000\n" - "[ 0.122459] Setting up static identity map for 0x805b9230 - 0x805b92a0\n" - "[ 0.125160] Brought up 1 CPUs\n" - "[ 0.125179] SMP: Total of 1 processors activated.\n" - "[ 0.125193] CPU: All CPU(s) started in SVC mode.\n" - "[ 0.127382] devtmpfs: initialized\n" - "[ 0.137997] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4\n" - "[ 0.171344] omap_hwmod: tptc0 using broken dt data from edma\n" - "[ 0.171647] omap_hwmod: tptc1 using broken dt data from edma\n" - "[ 0.171925] omap_hwmod: tptc2 using broken dt data from edma\n" - "[ 0.236581] omap_hwmod: dss_dispc: cannot be enabled for reset (3)\n" - "[ 0.239887] omap_hwmod: dss_rfbi: cannot be enabled for reset (3)\n" - "[ 0.241769] pinctrl core: initialized pinctrl subsystem\n" - "[ 0.243762] regulator-dummy: no parameters\n" - "[ 0.266686] NET: Registered protocol family 16\n" - "[ 0.271145] DMA: preallocated 256 KiB pool for atomic coherent allocations\n" - "[ 0.272944] cpuidle: using governor ladder\n" - "[ 0.272992] cpuidle: using governor menu\n" - "[ 0.287209] platform 49000000.edma: alias fck already exists\n" - "[ 0.287293] platform 49000000.edma: alias fck already exists\n" - "[ 0.287314] platform 49000000.edma: alias fck already exists\n" - "[ 0.288633] platform 44e3e000.rtc: Cannot lookup hwmod 'rtc'\n" - "[ 0.290482] gpiochip_add: registered GPIOs 0 to 31 on device: gpio\n" - "[ 0.291100] OMAP GPIO hardware version 0.1\n" - "[ 0.292129] gpiochip_add: registered GPIOs 32 to 63 on device: gpio\n" - "[ 0.293422] gpiochip_add: registered GPIOs 64 to 95 on device: gpio\n" - "[ 0.297098] platform 53701000.des: Cannot lookup hwmod 'des'\n" - "[ 0.303135] No ATAGs?\n" - "[ 0.303220] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.\n" - "[ 0.303256] hw-breakpoint: maximum watchpoint size is 4 bytes.\n" - "[ 0.338263] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver\n" - "[ 0.338869] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]'\n" - "[ 0.339398] V5_0D: 5000 mV\n" - "[ 0.339537] reg-fixed-voltage fixedregulator@0: Failed to find supply vin\n" - "[ 0.340842] reg-fixed-voltage fixedregulator@0: Failed to register regulator: -517\n" - "[ 0.340893] platform fixedregulator@0: Driver reg-fixed-voltage requests probe deferral\n" - "[ 0.341008] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]'\n" - "[ 0.341286] VBUS_USB: 5000 mV\n" - "[ 0.341401] reg-fixed-voltage fixedregulator@1: Failed to find supply vin\n" - "[ 0.341672] reg-fixed-voltage fixedregulator@1: Failed to register regulator: -517\n" - "[ 0.341709] platform fixedregulator@1: Driver reg-fixed-voltage requests probe deferral\n" - "[ 0.344303] SCSI subsystem initialized\n" - "[ 0.344904] usbcore: registered new interface driver usbfs\n" - "[ 0.345050] usbcore: registered new interface driver hub\n" - "[ 0.347504] usbcore: registered new device driver usb\n" - "[ 0.348353] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/i2c0_pins, deferring probe\n" - "[ 0.348397] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral\n" - "[ 0.348454] omap_i2c 4802a000.i2c: could not find pctldev for node /pinmux@44e10800/i2c1_pins, deferring probe\n" - "[ 0.348478] platform 4802a000.i2c: Driver omap_i2c requests probe deferral\n" - "[ 0.349489] Advanced Linux Sound Architecture Driver Initialized.\n" - "[ 0.352214] Switched to clocksource timer1\n" - "[ 0.459745] NET: Registered protocol family 2\n" - "[ 0.461308] TCP established hash table entries: 8192 (order: 3, 32768 bytes)\n" - "[ 0.461502] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)\n" - "[ 0.463402] TCP: Hash tables configured (established 8192 bind 8192)\n" - "[ 0.463731] TCP: reno registered\n" - "[ 0.463793] UDP hash table entries: 512 (order: 3, 40960 bytes)\n" - "[ 0.464052] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)\n" - "[ 0.465147] NET: Registered protocol family 1\n" - "[ 0.466781] RPC: Registered named UNIX socket transport module.\n" - "[ 0.466822] RPC: Registered udp transport module.\n" - "[ 0.466834] RPC: Registered tcp transport module.\n" - "[ 0.466846] RPC: Registered tcp NFSv4.1 backchannel transport module.\n" - "[ 0.470306] futex hash table entries: 256 (order: 2, 16384 bytes)\n" - "[ 0.474374] VFS: Disk quotas dquot_6.5.2\n" - "[ 0.474486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)\n" - "[ 0.476580] NFS: Registering the id_resolver key type\n" - "[ 0.476868] Key type id_resolver registered\n" - "[ 0.476904] Key type id_legacy registered\n" - "[ 0.477049] jffs2: version 2.2. (NAND) (SUMMARY) \302\251 2001-2006 Red Hat, Inc.\n" - "[ 0.477412] msgmni has been set to 1467\n" - "[ 0.481434] bounce: pool size: 64 pages\n" - "[ 0.481605] io scheduler noop registered\n" - "[ 0.481631] io scheduler deadline registered\n" - "[ 0.481696] io scheduler cfq registered (default)\n" - "[ 0.485979] pinctrl-single 44e10800.pinmux: 199 pins at pa f9e10800 size 796\n" - "[ 0.490000] pwm-backlight backlight: GPIO lookup for consumer enable\n" - "[ 0.490022] pwm-backlight backlight: using device tree for GPIO lookup\n" - "[ 0.490040] of_get_named_gpiod_flags: can't parse gpios property of node '/backlight[0]'\n" - "[ 0.490054] of_get_named_gpiod_flags: can't parse gpios property of node '/backlight[0]'\n" - "[ 0.490067] pwm-backlight backlight: using lookup tables for GPIO lookup\n" - "[ 0.490183] pwm-backlight backlight: lookup for GPIO enable failed\n" - "[ 0.490289] backlight supply power not found, using dummy regulator\n" - "[ 0.492682] DSS: set fck to 200000000\n" - "[ 0.493245] DSS: dss_runtime_get\n" - "[ 0.493292] DSS: dss_restore_context\n" - "[ 0.493336] OMAP DSS rev 2.0\n" - "[ 0.493346] DSS: dss_runtime_put\n" - "[ 0.493360] DSS: dss_save_context\n" - "[ 0.493370] DSS: context saved\n" - "[ 0.493854] DISPC: dispc_runtime_get\n" - "[ 0.493895] DSS: dss_restore_context\n" - "[ 0.493907] DSS: context restored\n" - "[ 0.493941] DISPC: dispc_restore_context\n" - "[ 0.493968] omapdss_dispc 4832a400.dispc: OMAP DISPC rev 3.0\n" - "[ 0.493979] DISPC: dispc_runtime_put\n" - "[ 0.493996] DISPC: dispc_save_context\n" - "[ 0.494032] DISPC: context saved\n" - "[ 0.495376] panel-dpi display: GPIO lookup for consumer enable\n" - "[ 0.495397] panel-dpi display: using device tree for GPIO lookup\n" - "[ 0.495451] of_get_named_gpiod_flags exited with status 0\n" - "[ 0.496831] DISPC: dispc_runtime_get\n" - "[ 0.497089] DISPC: dispc_runtime_put\n" - "[ 0.497111] DISPC: dispc_save_context\n" - "[ 0.497148] DISPC: context saved\n" - "[ 0.497358] DISPC: dispc_runtime_get\n" - "[ 0.497509] DISPC: dispc_runtime_put\n" - "[ 0.497548] DISPC: dispc_save_context\n" - "[ 0.497579] DISPC: context saved\n" - "[ 0.497604] DISPC: dispc_runtime_get\n" - "[ 0.497635] DISPC: dispc_runtime_put\n" - "[ 0.497650] DISPC: dispc_save_context\n" - "[ 0.497676] DISPC: context saved\n" - "[ 0.497696] DISPC: dispc_runtime_get\n" - "[ 0.497723] DISPC: dispc_runtime_put\n" - "[ 0.497737] DISPC: dispc_save_context\n" - "[ 0.497760] DISPC: context saved\n" - "[ 0.497960] DSS: dss_save_context\n" - "[ 0.498009] DSS: context saved\n" - "[ 0.501233] APPLY: omap_dss_mgr_apply(lcd)\n" - "[ 0.502209] Console: switching to colour frame buffer device 60x34\n" - "[ 0.504855] APPLY: omap_dss_mgr_apply(lcd)\n" - "[ 0.504885] APPLY: omap_dss_mgr_apply(lcd)\n" - "[ 0.504900] DPI: dpi_set_timings\n" - "[ 0.505078] DISPC: dispc_runtime_get\n" - "[ 0.505210] DSS: dss_restore_context\n" - "[ 0.505225] DSS: context restored\n" - "[ 0.505552] DSS: set fck to 198000000\n" - "[ 0.508202] APPLY: writing mgr 0 regs\n" - "[ 0.508252] APPLY: writing ovl 0 regs\n" - "[ 0.508273] DISPC: dispc_ovl_setup 0, pa 0xae840000, pa_uv 0x00000000, sw 480, 0,0, 480x272 -> 480x272, cmode 40, rot 0, mir 0, chan 0 repl 1\n" - "[ 0.508291] DISPC: calc_rot(0): scrw 480, 480x272\n" - "[ 0.508304] DISPC: offset0 0, offset1 0, row_inc 1, pix_inc 1\n" - "[ 0.508318] DISPC: 0,0 480x272 -> 480x272\n" - "[ 0.508332] APPLY: writing ovl 0 regs extra\n" - "[ 0.508342] DISPC: dispc_enable_plane 0, 1\n" - "[ 0.508355] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023\n" - "[ 0.508364] APPLY: writing ovl 1 regs\n" - "[ 0.508372] APPLY: writing ovl 1 regs extra\n" - "[ 0.508381] APPLY: writing ovl 2 regs\n" - "[ 0.508389] APPLY: writing ovl 2 regs extra\n" - "[ 0.508398] APPLY: writing mgr 0 regs extra\n" - "[ 0.508408] DISPC: channel 0 xres 480 yres 272\n" - "[ 0.508419] DISPC: pck 9000000\n" - "[ 0.508429] DISPC: hsw 4 hfp 8 hbp 43 vsw 10 vfp 4 vbp 12\n" - "[ 0.508440] DISPC: vsync_level 1 hsync_level 1 data_pclk_edge 1 de_level 0 sync_pclk_edge 0\n" - "[ 0.508449] DISPC: hsync 16822Hz, vsync 56Hz\n" - "[ 0.508461] DISPC: lck = 198000000 (1)\n" - "[ 0.508470] DISPC: pck = 9000000 (22)\n" - "[ 0.508743] omapfb omapfb: using display 'lcd' mode 480x272\n" - "[ 0.510994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\n" - "[ 0.516430] omap_uart 44e09000.serial: no wakeirq for uart0\n" - "[ 0.516467] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]'\n" - "[ 0.516488] omap_uart 44e09000.serial: No clock speed specified: using default: 48000000\n" - "[ 0.517035] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 104, base_baud = 3000000) is a OMAP UART0\n" - "[ 1.369909] console [ttyO0] enabled\n" - "[ 1.393306] brd: module loaded\n" - "[ 1.407599] loop: module loaded\n" - "[ 1.413502] mtdoops: mtd device (mtddev=name/number) must be supplied\n" - "[ 1.421194] ti-qspi 47900000.qspi: memory mapped resource not required\n" - "[ 1.519456] usbcore: registered new interface driver asix\n" - "[ 1.525443] usbcore: registered new interface driver ax88179_178a\n" - "[ 1.531942] usbcore: registered new interface driver cdc_ether\n" - "[ 1.538249] usbcore: registered new interface driver smsc95xx\n" - "[ 1.544429] usbcore: registered new interface driver net1080\n" - "[ 1.550443] usbcore: registered new interface driver cdc_subset\n" - "[ 1.556778] usbcore: registered new interface driver zaurus\n" - "[ 1.562813] usbcore: registered new interface driver cdc_ncm\n" - "[ 1.570817] usbcore: registered new interface driver cdc_wdm\n" - "[ 1.577089] usbcore: registered new interface driver usb-storage\n" - "[ 1.583590] usbcore: registered new interface driver usbtest\n" - "[ 1.591744] mousedev: PS/2 mouse device common for all mice\n" - "[ 1.600240] omap_rtc 44e3e000.rtc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info\n" - "[ 1.610515] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0\n" - "[ 1.618113] 44e3e000.rtc: already running\n" - "[ 1.622972] i2c /dev entries driver\n" - "[ 1.626696] Driver for 1-wire Dallas network protocol.\n" - "[ 1.636377] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n" - "[ 1.644980] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.645005] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'\n" - "[ 1.646047] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517\n" - "[ 1.653419] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral\n" - "[ 1.661412] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.661441] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.661461] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.661479] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.661501] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.662298] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.662599] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.662851] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.663539] ledtrig-cpu: registered to indicate activity on CPUs\n" - "[ 1.670316] usbcore: registered new interface driver usbhid\n" - "[ 1.676218] usbhid: USB HID core driver\n" - "[ 1.686465] davinci_evm sound: ASoC: CODEC (null) not registered\n" - "[ 1.693258] davinci_evm sound: snd_soc_register_card failed (-517)\n" - "[ 1.699796] platform sound: Driver davinci_evm requests probe deferral\n" - "[ 1.707389] oprofile: no performance counters\n" - "[ 1.712705] oprofile: using timer interrupt.\n" - "[ 1.717756] TCP: cubic registered\n" - "[ 1.721275] Initializing XFRM netlink socket\n" - "[ 1.725922] NET: Registered protocol family 17\n" - "[ 1.730642] NET: Registered protocol family 15\n" - "[ 1.735760] Key type dns_resolver registered\n" - "[ 1.740441] omap_voltage_late_init: Voltage driver support not added\n" - "[ 1.747176] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize\n" - "[ 1.755674] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize\n" - "[ 1.765097] ThumbEE CPU extension supported.\n" - "[ 1.769618] Registering SWP/SWPB emulation handler\n" - "[ 1.774719] SmartReflex Class3 initialized\n" - "[ 1.786932] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]'\n" - "[ 1.787552] V5_0D: 5000 mV\n" - "[ 1.790632] reg-fixed-voltage fixedregulator@0: Failed to find supply vin\n" - "[ 1.798436] reg-fixed-voltage fixedregulator@0: Failed to register regulator: -517\n" - "[ 1.806537] platform fixedregulator@0: Driver reg-fixed-voltage requests probe deferral\n" - "[ 1.815438] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]'\n" - "[ 1.815766] VBUS_USB: 5000 mV\n" - "[ 1.819088] reg-fixed-voltage fixedregulator@1: Failed to find supply vin\n" - "[ 1.826567] reg-fixed-voltage fixedregulator@1: Failed to register regulator: -517\n" - "[ 1.834559] platform fixedregulator@1: Driver reg-fixed-voltage requests probe deferral\n" - "[ 1.864401] vdd_core: 920 <--> 1140 mV at 1100 mV\n" - "[ 1.872723] vdd_mpu: 920 <--> 1375 mV at 1330 mV\n" - "[ 1.880067] vdds_ddr: 1350 mV\n" - "[ 1.885953] v3_3d: 3300 mV\n" - "[ 1.891406] v1_8d: 1800 mV\n" - "[ 1.895981] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 400 kHz\n" - "[ 1.907140] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/i2c@4802a000/tlv320aic3106@1b[0]'\n" - "[ 1.909258] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 400 kHz\n" - "[ 1.915920] of_get_named_gpiod_flags exited with status 0\n" - "[ 1.915947] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'\n" - "[ 1.956837] davinci_evm sound: tlv320aic3x-hifi <-> 4803c000.mcasp mapping ok\n" - "[ 1.985824] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]'\n" - "[ 1.986188] V5_0D: 5000 mV\n" - "[ 1.989231] V5_0D: supplied by v3_3d\n" - "[ 1.993646] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@1[0]'\n" - "[ 1.993982] VBUS_USB: 5000 mV\n" - "[ 1.997291] VBUS_USB: supplied by V5_0D\n" - "[ 2.029373] mmc0: host does not support reading read-only switch. assuming write-enable.\n" - "[ 2.039924] mmc0: new high speed SDHC card at address 0001\n" - "[ 2.049058] mmcblk0: mmc0:0001 00000 14.6 GiB\n" - "[ 2.058925] mmcblk0: p1 p2\n" - "[ 2.062698] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6\n" - "[ 2.069120] davinci_mdio 4a101000.mdio: detected phy mask ffffffcf\n" - "[ 2.081905] libphy: 4a101000.mdio: probed\n" - "[ 2.086292] davinci_mdio 4a101000.mdio: phy[4]: device 4a101000.mdio:04, driver unknown\n" - "[ 2.094745] davinci_mdio 4a101000.mdio: phy[5]: device 4a101000.mdio:05, driver unknown\n" - "[ 2.104147] cpsw 4a100000.ethernet: Detected MACID = 34:b1:f7:31:45:4b\n" - "[ 2.113009] cpsw 4a100000.ethernet: cpsw: Detected MACID = 34:b1:f7:31:45:4d\n" - "[ 2.122132] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)\n" - "[ 2.131167] sr_init: No PMIC hook to init smartreflex\n" - "[ 2.136698] sr_init: platform driver register failed for SR\n" - "[ 2.156224] ALSA device list:\n" - "[ 2.159357] #0: AM437x-SK-EVM\n" - "[ 2.322629] EXT4-fs (mmcblk0p2): recovery complete\n" - "[ 2.329912] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)\n" - "[ 2.338573] VFS: Mounted root (ext4 filesystem) on device 179:2.\n" - "[ 2.354804] devtmpfs: mounted\n" - "[ 2.358353] Freeing unused kernel memory: 412K (c0844000 - c08ab000)\n" - ">[ 3.032245] udevd[783]: starting version 182\n" - "[ 4.003482] lis3lv02d: 16 bits lis331dlh sensor found\n" - "[ 4.142890] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0\n" - "[ 4.340037] of_get_named_gpiod_flags exited with status 0\n" - "[ 4.340072] of_get_named_gpiod_flags exited with status 0\n" - "[ 4.340090] of_get_named_gpiod_flags exited with status 0\n" - "[ 4.340110] of_get_named_gpiod_flags exited with status 0\n" - "[ 4.341037] input: matrix_keypad@0 as /devices/matrix_keypad@0/input/input1\n" - "[ 7.454529] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.\n" - "[ 8.000585] random: nonblocking pool is initialized\n" - "[ 8.103464] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered\n" - "[ 9.099669] net eth0: initializing cpsw version 1.15 (0)\n" - "[ 9.182898] net eth0: phy found : id is : 0x221621\n" - [ 13.183101] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx + "Darren\n" + "-------------- next part --------------\n" + "A non-text attachment was scrubbed...\n" + "Name: dmesg-am437x-sk.log\n" + "Type: text/x-log\n" + "Size: 21088 bytes\n" + "Desc: not available\n" + URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140624/05b3e521/attachment-0001.bin> -1e3abb278b3d981c9d606ba9d97d52775b7aa9c5607fbad01308bd77d325ed35 +b5fc1bd63c38a4cd3497a27c88aeae015ad263df6242f8da487f6aff02312b30
diff --git a/a/1.txt b/N2/1.txt index 0539b68..951b785 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -2,11 +2,11 @@ On 06/23/2014 01:20 PM, Felipe Balbi wrote: > Add support for TI's AM437x StarterKit Evaluation > Module. > -> Cc: Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org> -> Cc: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org> -> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> +> Cc: Josh Elliot <jelliott@ti.com> +> Cc: Darren Etheridge <detheridge@ti.com> +> Signed-off-by: Felipe Balbi <balbi@ti.com> -Tested-by: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org> +Tested-by: Darren Etheridge <detheridge@ti.com> I tested with omap2plus_defconfig + additionally enabling OMAPDSS and Backlight in .config. Working great for me with ethernet, sdcard, lcd diff --git a/a/content_digest b/N2/content_digest index f9d3963..f9898b4 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,34 +1,33 @@ "ref\01403547659-24558-1-git-send-email-balbi@ti.com\0" "ref\01403547659-24558-3-git-send-email-balbi@ti.com\0" - "ref\01403547659-24558-3-git-send-email-balbi-l0cyMroinI0@public.gmane.org\0" - "From\0Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\0" + "From\0Darren Etheridge <detheridge@ti.com>\0" "Subject\0Re: [PATCH v3 2/2] arm: dts: add support for AM437x StarterKit\0" "Date\0Tue, 24 Jun 2014 21:07:50 -0500\0" - "To\0Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>" - " Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\0" - "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" - galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org - Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> - linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org - Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org> - Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> - r.sricharan-l0cyMroinI0@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Linux OMAP Mailing List <linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - Linux ARM Kernel Mailing List <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - " Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org>\0" + "To\0Felipe Balbi <balbi@ti.com>" + " Benoit Cousson <bcousson@baylibre.com>\0" + "Cc\0<robh+dt@kernel.org>" + <galak@codeaurora.org> + Tony Lindgren <tony@atomide.com> + <linux@arm.linux.org.uk> + Rajendra Nayak <rnayak@ti.com> + Nishanth Menon <nm@ti.com> + <r.sricharan@ti.com> + <devicetree@vger.kernel.org> + Linux Kernel Mailing List <linux-kernel@vger.kernel.org> + Linux OMAP Mailing List <linux-omap@vger.kernel.org> + Linux ARM Kernel Mailing List <linux-arm-kernel@lists.infradead.org> + " Josh Elliot <jelliott@ti.com>\0" "\01:1\0" "b\0" "On 06/23/2014 01:20 PM, Felipe Balbi wrote:\n" "> Add support for TI's AM437x StarterKit Evaluation\n" "> Module.\n" ">\n" - "> Cc: Josh Elliot <jelliott-l0cyMroinI0@public.gmane.org>\n" - "> Cc: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\n" - "> Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>\n" + "> Cc: Josh Elliot <jelliott@ti.com>\n" + "> Cc: Darren Etheridge <detheridge@ti.com>\n" + "> Signed-off-by: Felipe Balbi <balbi@ti.com>\n" "\n" - "Tested-by: Darren Etheridge <detheridge-l0cyMroinI0@public.gmane.org>\n" + "Tested-by: Darren Etheridge <detheridge@ti.com>\n" "\n" "I tested with omap2plus_defconfig + additionally enabling OMAPDSS and \n" "Backlight in .config. Working great for me with ethernet, sdcard, lcd \n" @@ -384,4 +383,4 @@ "[ 9.182898] net eth0: phy found : id is : 0x221621\n" [ 13.183101] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx -1e3abb278b3d981c9d606ba9d97d52775b7aa9c5607fbad01308bd77d325ed35 +bf045a9250d1388db89b9fdcb3977d7120c81498c94d0f249934f85dcd5d6dbd
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.