diff for duplicates of <53AA7E01.3090800@free-electrons.com> diff --git a/a/1.txt b/N1/1.txt index 3c3b580..eadd2c0 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -26,12 +26,12 @@ On 25/06/2014 09:35, Bo Shen wrote: >>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi >>>> @@ -34,6 +34,22 @@ >>>> ->>>> macb0: ethernet at f0028000 { +>>>> macb0: ethernet@f0028000 { >>>> phy-mode = "rgmii"; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + ->>>> + ethernet-phy at 1 { +>>>> + ethernet-phy@1 { >>> >>> The GMAC PHY address is 0x7 while not 0x1. >> @@ -41,7 +41,7 @@ On 25/06/2014 09:35, Bo Shen wrote: > 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic. I checked "Figure 5-16. RONETIX GEthernet ETH0" and "Figure 5-15. EMBEST -GEthernet ETH0" of this document "11180A?ATARM?30-Jan-13", which, +GEthernet ETH0" of this document "11180A–ATARM–30-Jan-13", which, AFAICT, are RGMII phy schematics of CPU Modules. I might have an old datasheet though. If this is the case could you point out the new one ? diff --git a/a/content_digest b/N1/content_digest index 8520f43..d88e122 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -3,10 +3,16 @@ "ref\053AA735C.7050805@atmel.com\0" "ref\053AA7A8C.1010304@free-electrons.com\0" "ref\053AA7BC6.3020902@atmel.com\0" - "From\0boris.brezillon@free-electrons.com (Boris BREZILLON)\0" - "Subject\0[PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0" + "From\0Boris BREZILLON <boris.brezillon@free-electrons.com>\0" + "Subject\0Re: [PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0" "Date\0Wed, 25 Jun 2014 09:45:05 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Bo Shen <voice.shen@atmel.com>\0" + "Cc\0Nicolas Ferre <nicolas.ferre@atmel.com>" + Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> + Alexandre Belloni <alexandre.belloni@free-electrons.com> + Andrew Victor <linux@maxim.org.za> + linux-kernel@vger.kernel.org + " linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "\n" @@ -37,12 +43,12 @@ ">>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi\n" ">>>> @@ -34,6 +34,22 @@\n" ">>>>\n" - ">>>> macb0: ethernet at f0028000 {\n" + ">>>> macb0: ethernet@f0028000 {\n" ">>>> phy-mode = \"rgmii\";\n" ">>>> + #address-cells = <1>;\n" ">>>> + #size-cells = <0>;\n" ">>>> +\n" - ">>>> + ethernet-phy at 1 {\n" + ">>>> + ethernet-phy@1 {\n" ">>>\n" ">>> The GMAC PHY address is 0x7 while not 0x1.\n" ">>\n" @@ -52,7 +58,7 @@ "> 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic.\n" "\n" "I checked \"Figure 5-16. RONETIX GEthernet ETH0\" and \"Figure 5-15. EMBEST\n" - "GEthernet ETH0\" of this document \"11180A?ATARM?30-Jan-13\", which,\n" + "GEthernet ETH0\" of this document \"11180A\342\200\223ATARM\342\200\22330-Jan-13\", which,\n" "AFAICT, are RGMII phy schematics of CPU Modules.\n" "I might have an old datasheet though.\n" "If this is the case could you point out the new one ?\n" @@ -103,4 +109,4 @@ "Embedded Linux and Kernel engineering\n" http://free-electrons.com -357b511d2d69d03d9c8b9688d816ad6ac93a6c89d87f1e8a6273af5d9cda0ac3 +3f2f2146a009f3ee61546a6b7fec04aa1be8522290b83c583f36269ebc744659
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.