diff for duplicates of <53AA8B11.6010907@atmel.com> diff --git a/a/1.txt b/N1/1.txt index 30a4c16..eccdb5a 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -29,12 +29,12 @@ On 06/25/2014 03:45 PM, Boris BREZILLON wrote: >>>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi >>>>> @@ -34,6 +34,22 @@ >>>>> ->>>>> macb0: ethernet at f0028000 { +>>>>> macb0: ethernet@f0028000 { >>>>> phy-mode = "rgmii"; >>>>> + #address-cells = <1>; >>>>> + #size-cells = <0>; >>>>> + ->>>>> + ethernet-phy at 1 { +>>>>> + ethernet-phy@1 { >>>> >>>> The GMAC PHY address is 0x7 while not 0x1. >>> @@ -44,7 +44,7 @@ On 06/25/2014 03:45 PM, Boris BREZILLON wrote: >> 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic. > > I checked "Figure 5-16. RONETIX GEthernet ETH0" and "Figure 5-15. EMBEST -> GEthernet ETH0" of this document "11180A?ATARM?30-Jan-13", which, +> GEthernet ETH0" of this document "11180A–ATARM–30-Jan-13", which, > AFAICT, are RGMII phy schematics of CPU Modules. > I might have an old datasheet though. > If this is the case could you point out the new one ? diff --git a/a/content_digest b/N1/content_digest index 7ab6675..1d36b13 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,10 +4,16 @@ "ref\053AA7A8C.1010304@free-electrons.com\0" "ref\053AA7BC6.3020902@atmel.com\0" "ref\053AA7E01.3090800@free-electrons.com\0" - "From\0voice.shen@atmel.com (Bo Shen)\0" - "Subject\0[PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0" + "From\0Bo Shen <voice.shen@atmel.com>\0" + "Subject\0Re: [PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0" "Date\0Wed, 25 Jun 2014 16:40:49 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Boris BREZILLON <boris.brezillon@free-electrons.com>\0" + "Cc\0Nicolas Ferre <nicolas.ferre@atmel.com>" + Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> + Alexandre Belloni <alexandre.belloni@free-electrons.com> + Andrew Victor <linux@maxim.org.za> + <linux-kernel@vger.kernel.org> + " <linux-arm-kernel@lists.infradead.org>\0" "\00:1\0" "b\0" "Hi Boris,\n" @@ -41,12 +47,12 @@ ">>>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi\n" ">>>>> @@ -34,6 +34,22 @@\n" ">>>>>\n" - ">>>>> macb0: ethernet at f0028000 {\n" + ">>>>> macb0: ethernet@f0028000 {\n" ">>>>> phy-mode = \"rgmii\";\n" ">>>>> + #address-cells = <1>;\n" ">>>>> + #size-cells = <0>;\n" ">>>>> +\n" - ">>>>> + ethernet-phy at 1 {\n" + ">>>>> + ethernet-phy@1 {\n" ">>>>\n" ">>>> The GMAC PHY address is 0x7 while not 0x1.\n" ">>>\n" @@ -56,7 +62,7 @@ ">> 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic.\n" ">\n" "> I checked \"Figure 5-16. RONETIX GEthernet ETH0\" and \"Figure 5-15. EMBEST\n" - "> GEthernet ETH0\" of this document \"11180A?ATARM?30-Jan-13\", which,\n" + "> GEthernet ETH0\" of this document \"11180A\342\200\223ATARM\342\200\22330-Jan-13\", which,\n" "> AFAICT, are RGMII phy schematics of CPU Modules.\n" "> I might have an old datasheet though.\n" "> If this is the case could you point out the new one ?\n" @@ -79,4 +85,4 @@ "Best Regards,\n" Bo Shen -e4e05416dd3f1d46853afe5f104b1515e1aa32e130ac488985afe8b6d90ec4d4 +8adfe6f3f4834ebca2659f5a7a7b0252955e7fb2f162da1216607841df92c99e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.