Re: [PATCH] clk: s3c64xx: Hookup SPI clocks correctly

[Tomasz Figa <t.figa@samsung.com>]

Hi Charles,

On 18.06.2014 11:52, Charles Keepax wrote:
> In the move to this clock driver the hookups for the SPI clocks were
> dropped, which causes my system Cragganmore (s3c6410 based) to be unable
> to locate any spibus clocks. This patch adds them back in.
> 
> When taking the clock from the epll clock (SCLK) the rates on the SPI
> bus are incorrect, this needs further debugging but the hookup here
> should be correct and the problem should be else where.
> 
> The USBCLK case has been dropped because this requires the USB PHY to be
> enabled.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/clk/samsung/clk-s3c64xx.c |    6 ++++--
>  1 files changed, 4 insertions(+), 2 deletions(-)

Thanks for fixing this. Will apply to my fixes branch.

Best regards,
Tomasz