All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Yang <liezhi.yang@windriver.com>
To: Himanshu Pandey <pandey_himanshu80@rediffmail.com>
Cc: "openembedded-devel@lists.openembedded.org"
	<openembedded-devel@lists.openembedded.org>
Subject: Re: Regarding dhcp package
Date: Thu, 10 Jul 2014 18:54:27 +0800	[thread overview]
Message-ID: <53BE70E3.2040801@windriver.com> (raw)
In-Reply-To: <1404981539.S.9382.6688.H.TlJvYmVydCBZYW5nAFJlOiBSZWdhcmRpbmcgZGhjcCBwYWNrYWdl.RU.rfs209, rfs209, 44, 425.f4-235-142.old.1404985811.15071@webmail.rediffmail.com>


The error is:

configure: error: source directory already configured; run "make distclean" 
there first

Try a clean build ?

For example:

bitbake dhcp -ccleansstate && bitbake dhcp

If you get the same error again, you may need inherit autotools-brokensep
rather than autotools as a quick workaround.

// Robert

On 07/10/2014 05:50 PM, Himanshu Pandey wrote:
> Hi,
>
> As advised by you I have done that but again I am getting an error.
>
> Please find the log as attachment.
>
> Regards,
> Himanshu
>
> From: Robert Yang <liezhi.yang@windriver.com>
> Sent: Thu, 10 Jul 2014 14:08:59
> To: Himanshu Pandey <pandey_himanshu80@rediffmail.com>
> Cc: "openembedded-devel@lists.openembedded.org"
> <openembedded-devel@lists.openembedded.org>
> Subject: Re: Regarding dhcp package
>
>
> On 07/10/2014 04:17 PM, Himanshu Pandey wrote:
>  > Hi Robert,
>  >
>  > I am getting an error while compiling my dhcp package. Please find the log as
>  > attachment.
>  >
>  > My dhcp bb file is as follows:
>  >
>  > SECTION = "base"
>  > SUMMARY = "Internet Software Consortium DHCP package"
>  > DESCRIPTION = "DHCP (Dynamic Host Configuration Protocol) is a protocol \
>  > which allows individual devices on an IP network to get their own \
>  > network configuration information from a server.  DHCP helps make it \
>  > easier to administer devices."
>  >
>  > HOMEPAGE = "http://www.isc.org/"
>  >
>  > LICENSE = "CLOSED"
>  >
>  > DEPENDS = "openssl bind"
>  >
>  > SRC_URI =
> "svn://192.43.23.436/home/repo/dhcp-4.2.4-P2;module=branch;user=;pswd="
> <http://192.43.23.436/home/repo/dhcp-4.2.4-P2;module=branch;user=;pswd=">
>  > SRCREV = "${AUTOREV}"
>  > S= "${WORKDIR}/trunk"
>  > #inherit autotools
>  > do_compile() {
>  >          #cp -f ${WORKDIR}/trunk/include/site.h ${S}/includes
>  >          cd ../trunk
>  >          ./configure --prefix=${prefix} --host=${HOST_SYS}
>  >          make
>  > }
>  >
>
> I think that these are wrong, you should not disable the "inherit autotools",
> and should not use "./configure" or "make" directly, try to enable
> the "inherit autotools", and remove the do_compile section to see what
> would happen, maybe you need:
>
> inherit autotools
> S = "${WORKDIR}/trunk"
>
> // Robert
>
>  >
>  > do_install_append () {
>  >          install -d ${D}${sysconfdir}/init.d
>  >          install -d ${D}${sysconfdir}/default
>  >          install -d ${D}${sysconfdir}/dhcp
>  >          install -d /etc/dhcp
>  >          install -d /sbin
>  >          install -d /var/db
>  >          install -d /var/lib
>  >          install -d /usr/local/sbin/
>  > install -m 0755 ${D}/sbin/dhcrelay
>  >          install -m 0755 ${D}/sbin/dhcpd
>  >          install -m 0755 ${D}/sbin/dhclient-script
>  >          install -m 0755 ${D}/var/db/dhcpd.leases
>  >          install -m 0755 ${D}/var/lib/dhcpd
>  >          install -m 0755 ${D}/usr/local/sbin/dhclient
>  >          sudo touch ${D}/usr/local/bin/dhcpd-pools
>  >          rm -f ${D}${sysconfdir}/dhclient.conf*
>  >          rm -f ${D}${sysconfdir}/dhcpd.conf*
>  >          rm -f /etc/dhcpd.conf*
>  >          install -m 0644 ${WORKDIR}/dhcpd.conf ${D}/etc/dhcpd.conf
>  >          install -m 0644 ${WORKDIR}/dhclient.conf ${D}/etc/dhcp/dhclient.conf
>  >
>  >          install -d ${D}${base_sbindir}/
>  >          if [ "${sbindir}" != "${base_sbindir}" ]; then
>  >                  mv ${D}${sbindir}/dhclient ${D}${base_sbindir}/
>  >          fi
>  >          install -m 0755 ${S}/client/scripts/linux
>  > ${D}${base_sbindir}/dhclient-script
>  > }
>  >
>  > PACKAGES += "dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell"
>  >
>  > FILES_${PN} = ""
>  > RDEPENDS_${PN}-dev = ""
>  > RDEPENDS_${PN}-staticdev = ""
>  >
>  > FILES_dhcp-server = "${sbindir}/dhcpd ${sysconfdir}/init.d/dhcp-server"
>  > RRECOMMENDS_dhcp-server = "dhcp-server-config"
>  >
>  > FILES_dhcp-server-config = "${sysconfdir}/default/dhcp-server
>  > ${sysconfdir}/dhcp/dhcpd.conf"
>  >
>  > FILES_dhcp-relay = "${sbindir}/dhcrelay ${sysconfdir}/init.d/dhcp-relay
>  > ${sysconfdir}/default/dhcp-relay"
>  >
>  > FILES_dhcp-client = "${base_sbindir}/dhclient ${base_sbindir}/dhclient-script
>  > ${sysconfdir}/dhcp/dhclient.conf"
>  > RDEPENDS_dhcp-client = "bash"
>  >
>  > FILES_dhcp-omshell = "${bindir}/omshell"
>  >
>  > pkg_postinst_dhcp-server() {
>  >      mkdir -p $D/${localstatedir}/lib/dhcp
>  >      touch $D/${localstatedir}/lib/dhcp/dhcpd.leases
>  >      touch $D/${localstatedir}/lib/dhcp/dhcpd6.leases
>  > }
>  >
>  > pkg_postinst_dhcp-client() {
>  >      mkdir -p $D/${localstatedir}/lib/dhcp
>  > }
>  >
>  > pkg_postrm_dhcp-server() {
>  >      rm -f $D/${localstatedir}/lib/dhcp/dhcpd.leases
>  >      rm -f $D/${localstatedir}/lib/dhcp/dhcpd6.leases
>  >
>  >      if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
>  >          echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
>  >      fi
>  > }
>  >
>  > pkg_postrm_dhcp-client() {
>  >      rm -f $D/${localstatedir}/lib/dhcp/dhclient.leases
>  >      rm -f $D/${localstatedir}/lib/dhcp/dhclient6.leases
>  >
>  >      if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
>  >          echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
>  >      fi
>  > }
>  >
>  > Please help.
>  >
>  > Regards,
>  > Himanshu
>  >
>  > From: Robert Yang <liezhi.yang@windriver.com>
>  > Sent: Wed, 02 Jul 2014 15:22:14
>  > To: Himanshu Pandey <pandey_himanshu80@rediffmail.com>,
>  > "openembedded-devel@lists.openembedded.org"
>  > <openembedded-devel@lists.openembedded.org>
>  > Subject: Re: [bitbake-devel] Regarding rp-pppoe package
>  >
>  >
>  > On 07/02/2014 05:49 PM, Himanshu Pandey wrote:
>  >  > Hi,
>  >  >
>  >  > I am getting following error when I tried to add and compile rp-pppoe
> pacakage:
>  >  >
>  >
>  > Please add the full error log, thanks.
>  >
>  > Btw, I will go to have dinner now, may reply tomorrow.
>  >
>  > // Robert
>  >
>  >  > ERROR: oe_runconf failed
>  >  >
>  >  > Please help.
>  >  >
>  >  > Regards,
>  >  > Himanshu
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > From: Robert Yang <liezhi.yang@windriver.com>
>  >  > Sent: Wed, 02 Jul 2014 13:16:17
>  >  > To: Himanshu Pandey <pandey_himanshu80@rediffmail.com>
>  >  > Cc: openembedded-devel <openembedded-devel@lists.openembedded.org>
>  >  > Subject: Re: [bitbake-devel] Regarding Net-Snmp package
>  >  >
>  >  > I think that this email should go into oe-devel (see the cc) since
>  >  > the net-snmp is from the meta-networking layer, please see:
>  >  >
>  >  > meta-networking/recipes-protocols/net-snmp/net-snmp_5.7.2.bb
>  >  >
>  >  > PACKAGES = "${PN}-dbg ${PN}-doc ${PN}-dev ${PN}-staticdev ${PN}-static
>  > ${PN}-libs \
>  >  >              ${PN}-mibs ${PN}-server ${PN}-client ${PN}-server-snmpd
>  >  > ${PN}-server-snmptrapd"
>  >  >
>  >  > There is no net-snmp in the PACKAGES, I think that you need use
>  >  > net-snmp-client or net-snmp-server.
>  >  >
>  >  > // Robert
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > On 07/02/2014 03:36 PM, Himanshu Pandey wrote:
>  >  >  > Hi,
>  >  >  >
>  >  >  > I am getting following errors:
>  >  >  >
>  >  >  > Error: net-snmp not found in the base feeds (genericx86_64 x86_64
> noarch any
>  >  > all).
>  >  >  >
>  >  >  > sed: can't read
>  >  >  >
>  >  >
>  >
> /home/yocto/poky-dora-10.0.0/build/tmp/work/x86_64-poky-linux/net-snmp/5.7.2-r1/image/usr/bin/net-snmp-config:
>  >  >  > No such file or directory
>  >  >  >
>  >  >  > Please help.
>  >  >  >
>  >  >  > Regards,
>  >  >  > Himanshu
>  >  >  >
>  >  >  >
>  >  >  >
>  >  >
>  >
> <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?>
>  >  >  > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company
>  >  > email.
>  >  >  >    *Know More >*
>  >  >  >
>  >  >
>  >
> <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
>  >  >  >
>  >  >  >
>  >  >  >
>  >  >
>  >  >
>  >
> <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?>
>  >  > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company
>  > email.
>  >  >    *Know More >*
>  >  >
>  >
> <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
>  >  >
>  >
>  >
> <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?>
>  > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company
> email.
>  >    *Know More >*
>  >
> <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
>  >
>
> <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?>
> Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company email.
> 	*Know More >*
> <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
>


       reply	other threads:[~2014-07-10 10:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1404981539.S.9382.6688.H.TlJvYmVydCBZYW5nAFJlOiBSZWdhcmRpbmcgZGhjcCBwYWNrYWdl.RU.rfs209, rfs209, 44, 425.f4-235-142.old.1404985811.15071@webmail.rediffmail.com>
2014-07-10 10:54 ` Robert Yang [this message]
     [not found] <1404294734.S.4360.22202.H.TlJvYmVydCBZYW5nAFJlOiBbYml0YmFrZS1kZXZlbF0gUmVnYXJkaW5nIHJwLXBwcG9lIHBhY2thZ2U_.RU.rfs209, rfs209, 241, 539.f4-235-92.old.replied.1404980271.29674@webmail.rediffmail.com>
2014-07-10  8:38 ` Regarding dhcp package Robert Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53BE70E3.2040801@windriver.com \
    --to=liezhi.yang@windriver.com \
    --cc=openembedded-devel@lists.openembedded.org \
    --cc=pandey_himanshu80@rediffmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.