diff for duplicates of <53C398CD.1060404@gmail.com> diff --git a/a/1.txt b/N1/1.txt index d8ef5a1..56bbe19 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -28,9 +28,9 @@ On 07/14/2014 01:54 PM, Dong Aisheng wrote: >>>> check this by enable DEBUG... >>>> >>> My test showed the format is: ->>> root@imx6qdlsolo:~# uname -a +>>> root at imx6qdlsolo:~# uname -a >>> Linux imx6qdlsolo 3.16.0-rc2-next-20140627-00006-gd55dd62-dirty #373 SMP Fri Jul 11 18:12:31 CST 2014 armv7l GNU/Linux ->>> root@imx6qdlsolo:~# dmesg | grep m_can +>>> root at imx6qdlsolo:~# dmesg | grep m_can >>> m_can 20e8000.can: mram_base c0990000 sidf 0x0 0 xidf 0x0 0 rxf0 0x0 32 rxf1 0x200 0 rxb 0x200 0 txe 0x200 0 txb 0x200 1 >>> m_can 20e8000.can: m_can device registered (regs=c0988000, irq=146) >>> m_can 20f0000.can: mram_base c09a0000 sidf 0x400 0 xidf 0x400 0 rxf0 0x400 32 rxf1 0x600 0 rxb 0x600 0 txe 0x600 0 txb 0x600 1 @@ -41,7 +41,7 @@ On 07/14/2014 01:54 PM, Dong Aisheng wrote: >> I faced the above problem when i use pr_debug(). Can you check with this....? >> > It works too. -> root@imx6qdlsolo:~# dmesg | grep mram +> root at imx6qdlsolo:~# dmesg | grep mram > mram_base c0990000 sidf 0x0 0 xidf 0x0 0 rxf0 0x0 32 rxf1 0x200 0 rxb 0x200 0 txe 0x200 0 txb 0x200 1 > mram_base c09a0000 sidf 0x400 0 xidf 0x400 0 rxf0 0x400 32 rxf1 0x600 0 rxb 0x600 0 txe 0x600 0 txb 0x600 1 > diff --git a/a/content_digest b/N1/content_digest index 8e6dece..21124ca 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -6,17 +6,10 @@ "ref\020140714072146.GD1668@shlinux1.ap.freescale.net\0" "ref\053C3885B.5020008@gmail.com\0" "ref\020140714082432.GA21584@shlinux1.ap.freescale.net\0" - "From\0Varka Bhadram <varkabhadram@gmail.com>\0" - "Subject\0Re: [PATCH v3 2/2] can: m_can: add Bosch M_CAN controller support\0" + "From\0varkabhadram@gmail.com (Varka Bhadram)\0" + "Subject\0[PATCH v3 2/2] can: m_can: add Bosch M_CAN controller support\0" "Date\0Mon, 14 Jul 2014 14:16:05 +0530\0" - "To\0Dong Aisheng <b29396@freescale.com>\0" - "Cc\0Marc Kleine-Budde <mkl@pengutronix.de>" - linux-can@vger.kernel.org - wg@grandegger.com - socketcan@hartkopp.net - linux-arm-kernel@lists.infradead.org - devicetree@vger.kernel.org - " mark.rutland@arm.com\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On 07/14/2014 01:54 PM, Dong Aisheng wrote:\n" @@ -49,9 +42,9 @@ ">>>> check this by enable DEBUG...\n" ">>>>\n" ">>> My test showed the format is:\n" - ">>> root@imx6qdlsolo:~# uname -a\n" + ">>> root at imx6qdlsolo:~# uname -a\n" ">>> Linux imx6qdlsolo 3.16.0-rc2-next-20140627-00006-gd55dd62-dirty #373 SMP Fri Jul 11 18:12:31 CST 2014 armv7l GNU/Linux\n" - ">>> root@imx6qdlsolo:~# dmesg | grep m_can\n" + ">>> root at imx6qdlsolo:~# dmesg | grep m_can\n" ">>> m_can 20e8000.can: mram_base c0990000 sidf 0x0 0 xidf 0x0 0 rxf0 0x0 32 rxf1 0x200 0 rxb 0x200 0 txe 0x200 0 txb 0x200 1\n" ">>> m_can 20e8000.can: m_can device registered (regs=c0988000, irq=146)\n" ">>> m_can 20f0000.can: mram_base c09a0000 sidf 0x400 0 xidf 0x400 0 rxf0 0x400 32 rxf1 0x600 0 rxb 0x600 0 txe 0x600 0 txb 0x600 1\n" @@ -62,7 +55,7 @@ ">> I faced the above problem when i use pr_debug(). Can you check with this....?\n" ">>\n" "> It works too.\n" - "> root@imx6qdlsolo:~# dmesg | grep mram\n" + "> root at imx6qdlsolo:~# dmesg | grep mram\n" "> mram_base c0990000 sidf 0x0 0 xidf 0x0 0 rxf0 0x0 32 rxf1 0x200 0 rxb 0x200 0 txe 0x200 0 txb 0x200 1\n" "> mram_base c09a0000 sidf 0x400 0 xidf 0x400 0 rxf0 0x400 32 rxf1 0x600 0 rxb 0x600 0 txe 0x600 0 txb 0x600 1\n" ">\n" @@ -87,4 +80,4 @@ "Regards,\n" Varka Bhadram. -5a9d05b9a9372cdc5982d4e3060f5d37edc8c109b160b60abaf0cfa0d7da55ec +72ef4f8c9bc366a8d4fd35ff7454d5ec6767c8d690f25f324cfe8624ec86b6c6
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.