All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Subject: Re: [PATCH v2] i2c: add Marvell 64xxx driver
Date: Thu, 17 Jul 2014 11:33:29 +0200	[thread overview]
Message-ID: <53C79869.4010000@gmail.com> (raw)
In-Reply-To: <1405545909-9855-2-git-send-email-antonynpavlov@gmail.com>

On 07/16/2014 11:25 PM, Antony Pavlov wrote:
> This driver is also used for Allwinner SoCs I2C controllers.
>
> Ported from linux-3.15.
>
> The most notable barebox driver version changes:
>
>    * drop message offloading support;
>    * add reg-io-width parameter to use driver with byte-oriented
>      controller versions.
>
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
[...]
> diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
> new file mode 100644
> index 0000000..324796a
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-mv64xxx.c
> @@ -0,0 +1,687 @@
> +/*
> + * Driver for the i2c controller on the Marvell line of host bridges
> + * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
> + *
> + * This code was ported from linux-3.15 kernel by Antony Pavlov.
> + *
> + * Author: Mark A. Greer <mgreer@mvista.com>
> + *
> + * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
> + * the terms of the GNU General Public License version 2.  This program
> + * is licensed "as is" without any warranty of any kind, whether express
> + * or implied.
> + */
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <of.h>
> +#include <malloc.h>
> +#include <types.h>
> +#include <xfuncs.h>
> +#include <clock.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <io.h>
> +#include <i2c/i2c.h>
> +#include <printk.h>
> +
> +#define MV64XXX_I2C_ADDR_ADDR(val)			((val & 0x7f) << 1)
> +#define MV64XXX_I2C_BAUD_DIV_N(val)			(val & 0x7)
> +#define MV64XXX_I2C_BAUD_DIV_M(val)			((val & 0xf) << 3)
> +
> +#define	MV64XXX_I2C_REG_CONTROL_ACK			0x00000004
> +#define	MV64XXX_I2C_REG_CONTROL_IFLG			0x00000008
> +#define	MV64XXX_I2C_REG_CONTROL_STOP			0x00000010
> +#define	MV64XXX_I2C_REG_CONTROL_START			0x00000020
> +#define	MV64XXX_I2C_REG_CONTROL_TWSIEN			0x00000040
> +#define	MV64XXX_I2C_REG_CONTROL_INTEN			0x00000080

Antony,

I'll have a look at the driver itself later, but your patch is full
of superfluous tabs like above between '#define' and 'MV64XXX_foo'.

Isn't checkpatch.pl complaining about it? Anyway, no need to resend
before I have tested the driver itself.

Sebastian


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-07-17  9:34 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-16 21:25 [PATCH v2] i2c: add Marvell 64xxx driver Antony Pavlov
2014-07-16 21:25 ` Antony Pavlov
2014-07-17  9:33   ` Sebastian Hesselbarth [this message]
2014-07-17 11:59     ` Antony Pavlov
2014-07-22  8:51   ` Sebastian Hesselbarth
2014-07-22  9:57     ` Antony Pavlov
2014-07-22 11:05       ` Sebastian Hesselbarth
2014-07-22 11:58         ` Antony Pavlov
2014-07-22 16:21     ` Antony Pavlov
2014-07-22 16:53       ` Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53C79869.4010000@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.