From: Killian De Volder <killian.de.volder@megasoft.be>
To: NeilBrown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Subject: Re: Unable to reduce raid size.
Date: Fri, 18 Jul 2014 11:58:25 +0200 [thread overview]
Message-ID: <53C8EFC1.1050105@megasoft.be> (raw)
In-Reply-To: <20140718194043.1c938b2c@notabene.brown>
Bytes are cheap, but screens are small (you'll have to scroll more).
"This condition isn't treated as an error by mdadm, so it isn't the cause."
This is not an error, but if the size isn't changed, the end result will be
component size of /dev/md125 unchanged at 2858285568K (skimmed the source code of mdadm, might have gotten it wrong though)
Full Strace below
execve("/sbin/mdadm", ["mdadm", "-vv", "--grow", "/dev/md125", "--size=2778726400"], [/* 99 vars */]) = 0
uname({sys="Linux", node="*****", ...}) = 0
brk(0) = 0xf43000
brk(0xf441c0) = 0xf441c0
arch_prctl(ARCH_SET_FS, 0xf43880) = 0
brk(0xf651c0) = 0xf651c0
brk(0xf66000) = 0xf66000
time(NULL) = 1405669998
getpid() = 20073
open("/dev/md125", O_RDWR) = 3
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
ioctl(3, RAID_VERSION, 0x7fffd69526c0) = 0
open("/etc/mdadm.conf", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0644, st_size=286, ...}) = 0
fstat(4, {st_mode=S_IFREG|0644, st_size=286, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4711ffe000
read(4, "ARRAY /dev/md/main metadata=1.2 "..., 4096) = 286
read(4, "", 4096) = 0
read(4, "", 4096) = 0
fstat(4, {st_mode=S_IFREG|0644, st_size=286, ...}) = 0
close(4) = 0
munmap(0x7f4711ffe000, 4096) = 0
open("/etc/mdadm.conf.d", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="qantourisc", ...}) = 0
geteuid() = 0
ioctl(3, GET_ARRAY_INFO, 0x7fffd6952570) = 0
ioctl(3, RAID_VERSION, 0x7fffd69502f0) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
readlink("/sys/dev/block/9:125", "../../devices/virtual/block/md12"..., 199) = 33
open("/sys/block/md125/md/metadata_version", O_RDONLY) = 4
read(4, "1.2\n", 1024) = 4
close(4) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
readlink("/sys/dev/block/9:125", "../../devices/virtual/block/md12"..., 199) = 33
ioctl(3, RAID_VERSION, 0x7fffd69503d0) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
readlink("/sys/dev/block/9:125", "../../devices/virtual/block/md12"..., 199) = 33
open("/sys/block/md125/md/metadata_version", O_RDONLY) = 4
read(4, "1.2\n", 1024) = 4
close(4) = 0
open("/sys/block/md125/md/level", O_RDONLY) = 4
read(4, "raid5\n", 1024) = 6
close(4) = 0
open("/sys/block/md125/md/raid_disks", O_RDONLY) = 4
read(4, "4\n", 1024) = 2
close(4) = 0
openat(AT_FDCWD, "/sys/block/md125/md/", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 4
fcntl(4, F_GETFD) = 0x1 (flags FD_CLOEXEC)
getdents(4, /* 41 entries */, 32768) = 1408
open("/sys/block/md125/md/dev-sdb4/slot", O_RDONLY) = 5
read(5, "2\n", 1024) = 2
close(5) = 0
open("/sys/block/md125/md/dev-sdb4/block/dev", O_RDONLY) = 5
read(5, "8:20\n", 1024) = 5
close(5) = 0
open("/sys/block/md125/md/dev-sdb4/block/device/state", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/sys/block/md125/md/dev-sdb4/state", O_RDONLY) = 5
read(5, "in_sync\n", 1024) = 8
close(5) = 0
open("/sys/block/md125/md/dev-sdc4/slot", O_RDONLY) = 5
read(5, "0\n", 1024) = 2
close(5) = 0
open("/sys/block/md125/md/dev-sdc4/block/dev", O_RDONLY) = 5
read(5, "8:36\n", 1024) = 5
close(5) = 0
open("/sys/block/md125/md/dev-sdc4/block/device/state", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/sys/block/md125/md/dev-sdc4/state", O_RDONLY) = 5
read(5, "in_sync\n", 1024) = 8
close(5) = 0
open("/sys/block/md125/md/dev-sdd4/slot", O_RDONLY) = 5
read(5, "3\n", 1024) = 2
close(5) = 0
open("/sys/block/md125/md/dev-sdd4/block/dev", O_RDONLY) = 5
read(5, "8:52\n", 1024) = 5
close(5) = 0
open("/sys/block/md125/md/dev-sdd4/block/device/state", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/sys/block/md125/md/dev-sdd4/state", O_RDONLY) = 5
read(5, "in_sync\n", 1024) = 8
close(5) = 0
getdents(4, /* 0 entries */, 32768) = 0
close(4) = 0
open("/sys/block/md125/md/metadata_version", O_RDONLY) = 4
read(4, "1.2\n", 1024) = 4
close(4) = 0
open("/sys/block/md125/md//array_state", O_RDWR) = 4
lseek(4, 0, SEEK_SET) = 0
read(4, "clean\n", 20) = 6
close(4) = 0
stat("/sys/block/md125/md//sync_action", {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
open("/sys/block/md125/md//sync_action", O_RDWR) = 4
lseek(4, 0, SEEK_SET) = 0
read(4, "idle\n", 20) = 5
close(4) = 0
open("/sys/block/md125/md//sync_action", O_WRONLY) = 4
write(4, "frozen", 6) = 6
close(4) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
open("/proc/devices", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4711ffe000
read(4, "Character devices:\n 1 mem\n 2 p"..., 1024) = 740
read(4, "", 1024) = 0
close(4) = 0
munmap(0x7f4711ffe000, 4096) = 0
open("/sys/block/md125/md/component_size", O_RDONLY) = 4
read(4, "2858285568\n", 50) = 11
close(4) = 0
open("/sys/block/md125/md/dev-sdb4/size", O_WRONLY) = 4
write(4, "2778726400", 10) = -1 EBUSY (Device or resource busy)
close(4) = 0
ioctl(3, SET_ARRAY_INFO, 0x7fffd6952570) = 0
ioctl(3, GET_ARRAY_INFO, 0x7fffd6952570) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(9, 125), ...}) = 0
open("/sys/block/md125/md/component_size", O_RDONLY) = 4
read(4, "2858285568\n", 50) = 11
close(4) = 0
write(2, "mdadm: component size of /dev/md"..., 61mdadm: component size of /dev/md125 unchanged at 2858285568K
) = 61
open("/sys/block/md125/md/metadata_version", O_RDONLY) = 4
read(4, "1.2\n", 1024) = 4
close(4) = 0
open("/sys/block/md125/md//sync_action", O_WRONLY) = 4
write(4, "idle", 4) = 4
close(4) = 0
exit_group(0) = ?
+++ exited with 0 +++
Killian De Volder
On 18-07-14 11:40, NeilBrown wrote:
> On Fri, 18 Jul 2014 10:50:54 +0200 Killian De Volder
> <killian.de.volder@megasoft.be> wrote:
>
>> Hello,
>>
>> I have a strange issue, I cannot reduce the size of a degraded raid 5:
>>
>> strace mdadm -vv --grow /dev/md125 --size=2778726400
>>
>> Fails with:
>> Stace:
>> open("/sys/block/md125/md/dev-sdb4/size", O_WRONLY) = 4
>> write(4, "2778726400", 10) = -1 EBUSY (Device or resource busy)
>> close(4)
> This condition isn't treated as an error by mdadm, so it isn't the cause.
>
> Could you post the entire strace (really, bytes a cheap, alway provide more
> detail than you think is needed.... though you did provide quite a bit)
>
> Any kernel messages (dmesg output) ??
>
> NeilBrown
>
>
>> Stdout:
>> component size of /dev/md125 unchanged at 2858285568K
>> Stderr:
>> <nothing>
>>
>>
>> Any suggestions ?
>> Note: I can work around this bug, by moving partitions around a bit, and not requiring the size reduction.
>> However I suspect a bug/undocumented border case that should be resolved?
>>
>>
>> Things I tried:
>> ---------------
>> - Disable bcache udev rules (as it was appearing in each attempt, maybe it got triggered during resize, seems not to be the case).
>> - I have tried the same with loop files -> this works fine even with bcache (and the udev rules disabled)
>> - Removed the internal write bitmap
>> - Opend the file os.open("md125",os.O_EXCL,os.O_RDWR) in Python to test if it's in use somewhere (command worked fine)
>> - Set array-size to the less then the desired new size (while still not destroying the FS below it).
>>
>>
>> Information:
>> ------------
>> Kernel version: 3.15.5
>> mdadm tools: 3.3-r2
>>
>> mdadm --detail:
>> /dev/md125:
>> Version : 1.2
>> Creation Time : Wed Apr 16 20:58:09 2014
>> Raid Level : raid5
>> Array Size : 8283750400 (7900.00 GiB 8482.56 GB)
>> Used Dev Size : 2858285568 (2725.87 GiB 2926.88 GB)
>> Raid Devices : 4
>> Total Devices : 3
>> Persistence : Superblock is persistent
>>
>> Update Time : Fri Jul 18 09:53:08 2014
>> State : clean, degraded
>> Active Devices : 3
>> Working Devices : 3
>> Failed Devices : 0
>> Spare Devices : 0
>>
>> Layout : left-symmetric
>> Chunk Size : 512K
>>
>> UUID : 885c588b:c3503d9d:c67b86db:2887f8f7
>> Events : 6440
>>
>> Number Major Minor RaidDevice State
>> 0 8 36 0 active sync /dev/sdc4
>> 2 0 0 2 removed
>> 2 8 20 2 active sync /dev/sdb4
>> 4 8 52 3 active sync /dev/sdd4
>>
next prev parent reply other threads:[~2014-07-18 9:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 8:50 Unable to reduce raid size Killian De Volder
2014-07-18 9:40 ` NeilBrown
2014-07-18 9:58 ` Killian De Volder [this message]
2014-07-18 10:48 ` NeilBrown
2014-07-18 11:19 ` Killian De Volder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C8EFC1.1050105@megasoft.be \
--to=killian.de.volder@megasoft.be \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.