From: Varka Bhadram <varkabhadram@gmail.com>
To: Lars-Peter Clausen <lars@metafoo.de>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>,
Harini Katakam <harini.katakam@xilinx.com>,
linux-gpio@vger.kernel.org
Subject: Re: [PATCH 3/3] gpio: zynq: Fix IRQ handlers
Date: Fri, 18 Jul 2014 15:28:40 +0530 [thread overview]
Message-ID: <53C8EFD0.3020008@gmail.com> (raw)
In-Reply-To: <1405677133-8706-3-git-send-email-lars@metafoo.de>
On 07/18/2014 03:22 PM, Lars-Peter Clausen wrote:
> drivers/gpio/gpio-zynq.c | 36 ++++++++++++++++++++++++++++--------
> 1 file changed, 28 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
> index fa3ad23..bfbcf97 100644
> --- a/drivers/gpio/gpio-zynq.c
> +++ b/drivers/gpio/gpio-zynq.c
> @@ -95,6 +95,9 @@ struct zynq_gpio {
> struct clk *clk;
> };
>
> +static struct irq_chip zynq_gpio_level_irqchip;
> +static struct irq_chip zynq_gpio_edge_irqchip;
> +
> /**
> * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
> * for a given pin in the GPIO device
> @@ -433,6 +436,15 @@ static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
> gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
> writel_relaxed(int_any,
> gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
> +
> + if (type & IRQ_TYPE_LEVEL_MASK) {
> + __irq_set_chip_handler_name_locked(irq_data->irq,
> + &zynq_gpio_level_irqchip, handle_fasteoi_irq, NULL);
Should match open parenthesis:
__irq_set_chip_handler_name_locked(irq_data->irq,
&zynq_gpio_level_irqchip,
handle_fasteoi_irq, NULL);
> + } else {
> + __irq_set_chip_handler_name_locked(irq_data->irq,
> + &zynq_gpio_edge_irqchip, handle_level_irq, NULL);
Dto..
> + }
> +
> return 0;
> }
>
> @@ -447,9 +459,21 @@ static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on)
> }
>
> /* irq chip descriptor */
> -static struct irq_chip zynq_gpio_irqchip = {
> +static struct irq_chip zynq_gpio_level_irqchip = {
> .name = DRIVER_NAME,
> .irq_enable = zynq_gpio_irq_enable,
> + .irq_eoi = zynq_gpio_irq_ack,
> + .irq_mask = zynq_gpio_irq_mask,
> + .irq_unmask = zynq_gpio_irq_unmask,
> + .irq_set_type = zynq_gpio_set_irq_type,
> + .irq_set_wake = zynq_gpio_set_wake,
> + .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
> +};
> +
> +static struct irq_chip zynq_gpio_edge_irqchip = {
> + .name = DRIVER_NAME,
> + .irq_enable = zynq_gpio_irq_enable,
> + .irq_ack = zynq_gpio_irq_ack,
> .irq_mask = zynq_gpio_irq_mask,
> .irq_unmask = zynq_gpio_irq_unmask,
> .irq_set_type = zynq_gpio_set_irq_type,
> @@ -493,10 +517,6 @@ static void zynq_gpio_irqhandler(unsigned int irq, struct irq_desc *desc)
> offset + bank_offset);
> generic_handle_irq(gpio_irq);
> }
> -
> - /* clear IRQ in HW */
> - writel_relaxed(int_sts, gpio->base_addr +
> - ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
> }
> }
>
> @@ -634,14 +654,14 @@ static int zynq_gpio_probe(struct platform_device *pdev)
> writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
> ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
>
> - ret = gpiochip_irqchip_add(chip, &zynq_gpio_irqchip, 0,
> - handle_simple_irq, IRQ_TYPE_NONE);
> + ret = gpiochip_irqchip_add(chip, &zynq_gpio_edge_irqchip, 0,
> + handle_level_irq, IRQ_TYPE_NONE);
> if (ret) {
> dev_err(&pdev->dev, "Failed to add irq chip\n");
> goto err_rm_gpiochip;
> }
>
> - gpiochip_set_chained_irqchip(chip, &zynq_gpio_irqchip, irq,
> + gpiochip_set_chained_irqchip(chip, &zynq_gpio_edge_irqchip, irq,
> zynq_gpio_irqhandler);
>
> pm_runtime_set_active(&pdev->dev);
--
Regards,
Varka Bhadram.
next prev parent reply other threads:[~2014-07-18 9:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 9:52 [PATCH 1/3] gpio: zynq: Take bank offset into account when reporting a IRQ Lars-Peter Clausen
2014-07-18 9:52 ` [PATCH 2/3] gpio: zynq: Clear pending interrupt when enabling " Lars-Peter Clausen
2014-07-23 14:31 ` Linus Walleij
2014-07-23 17:42 ` Sören Brinkmann
2014-07-24 0:08 ` Alexandre Courbot
2014-07-24 7:36 ` Harini Katakam
2014-07-18 9:52 ` [PATCH 3/3] gpio: zynq: Fix IRQ handlers Lars-Peter Clausen
2014-07-18 9:58 ` Varka Bhadram [this message]
2014-07-23 14:36 ` Linus Walleij
2014-07-31 16:19 ` Sören Brinkmann
2014-08-11 7:03 ` Linus Walleij
2014-07-19 4:14 ` [PATCH 1/3] gpio: zynq: Take bank offset into account when reporting a IRQ Alexandre Courbot
2014-07-23 14:22 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C8EFD0.3020008@gmail.com \
--to=varkabhadram@gmail.com \
--cc=gnurou@gmail.com \
--cc=harini.katakam@xilinx.com \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=michal.simek@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.