From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <53C9176A.7090306@xenomai.org> Date: Fri, 18 Jul 2014 14:47:38 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: In-Reply-To: Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Subject: Re: [Xenomai] Memory paging trouble List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Paal Tamas , xenomai@xenomai.org On 07/18/2014 02:23 PM, Paal Tamas wrote: > > > Gilles Chanteperdrix írta: >> On 07/18/2014 11:10 AM, Paal Tamas wrote: >>> >>> >>> Gilles Chanteperdrix írta: >>>> On 07/16/2014 02:42 PM, Paal Tamas wrote: >>>>> I keep on trying: >>>>> >>>>> Gilles, >>>>> >>>>> Hopefully this time it will be better. >>>>> >>>>> Besides, you can find the test app sourcecode at the end. >>>>> >>>>> I am using Xeno 2.6.3 together with a 3.0.15 Linux kernel on an i.MX6 ARM hardware. >>>> >>>> Do you have the same issue with a recent patch, like the one for 3.8 or >>>> for 3.10? >>>> >>>> -- >>>> Gilles. >>> >>> Do you mean to patch the 3.015 Linux kernel using a xenomai patch for the 3.8 or 3.10 versions? No I did not try it. >> >> No, I mean patching Linux 3.8 or Linux 3.10 with the corresponding patch. >> >> >> -- >> Gilles. >> > Unfortunately the latest BSP for my board (VAR-SOM-MX6) is for kernel 3.0.35. > It was a nightmare to add xenomai support to it. I had to start with 3.0.15 (since there was no direct Adeos and Xeno path for the 3.0.35).... I don't want to start the whole procedure from the beginning again... > Is there any other way to start with? The point is, you do not need the whole BSP to run your program. So, if you can boot a recent kernel with only support for serial console, that would be enough to run your test and see if you have any issues. > > Thanks, > Tamas > -- Gilles.