From: "Michel Dänzer" <michel@daenzer.net>
To: Peter Zijlstra <peterz@infradead.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Random panic in load_balance() with 3.16-rc
Date: Wed, 23 Jul 2014 17:05:24 +0900 [thread overview]
Message-ID: <53CF6CC4.6090207@daenzer.net> (raw)
In-Reply-To: <20140723064948.GK3935@laptop>
[-- Attachment #1: Type: text/plain, Size: 2218 bytes --]
On 23.07.2014 15:49, Peter Zijlstra wrote:
> On Tue, Jul 22, 2014 at 09:21:40PM -0700, Linus Torvalds wrote:
>> On Tue, Jul 22, 2014 at 8:53 PM, Michel Dänzer <michel@daenzer.net> wrote:
>>>
>>> Just happened again with the same change on top of 3.16-rc6.
>>
>> The (maybe) related bugzilla entry is just odd. Bruno Wolff reports
>> that the BUG_ON() in his added patch triggers:
>>
>> + cpumask_clear(sched_group_cpus(sg));
>> + sg->sgc->capacity = 0;
>> + BUG_ON(!cpumask_empty(sched_group_cpus(sg)));
>>
>> where it *just* did a cpumask_clear(), and now the BUG_ON() triggers
>> that it's no longer empty?
>>
>> That would imply an allocation error, but all the sched groups seem to
>> be properly allocated with the proper addition of cpumask_size().
>>
>> And his config file even has NR_CPUS being 32, so it should be a
>> single word of bitmap, which triggers all the simple code.
>>
>> Completely insane, in other words.
>
> So we've had this other thread where the same happened:
>
> lkml.kernel.org/r/20140716145546.GA6922@wolff.to
>
> (pointed Michel to that earlier)
>
> And that seems to be sorted now (just found positive feedback in my
> Inbox this morning), it was a question of the arch code supplying
> completely 'broken' topology information, and the scheduler trusting it
> too much.
>
> The real fix in that thread is:
>
> lkml.kernel.org/r/20140722133514.GM12054@laptop.lan
>
> And I'll also add this to make the scheduler less trusting:
>
> lkml.kernel.org/r/20140722094740.GJ12054@laptop.lan
>
> Michael, that's not going to tell us what's wrong with your machine, as
> you've not got the ancient dual P4 Xeon Bruno's got. Seeing how your
> cpuinfo says:
>
> model name : AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G
>
> but we can start the same debugging session I suppose.
>
> Could you run with this patch on top:
>
> lkml.kernel.org/r/20140718101633.GP9918@twins.programming.kicks-ass.net
>
> And provide us with the dmesg after boot?
Attached. No FAIL messages yet.
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Mesa and X developer
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 83535 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-rc6+ (daenzer@kaveri) (gcc version 4.9.0 (Debian 4.9.0-9) ) #146 SMP Wed Jul 23 16:58:12 JST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-rc6+ root=/dev/mapper/VG--Debian-LV--sid ro init=/bin/systemd quiet radeon.lockup_timeout=0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dcd1cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dcd1d000-0x00000000dd154fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd155000-0x00000000dd164fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd165000-0x00000000dd6d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd6d1000-0x00000000de50afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de50b000-0x00000000de565fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000de566000-0x00000000de566fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de567000-0x00000000de76cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de76d000-0x00000000deba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000deba7000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v32.31 by American Megatrends
[ 0.000000] efi: ACPI=0xdd15c000 ACPI 2.0=0xdd15c000 SMBIOS=0xf04c0 MPS=0xfd440
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002aa5000) (26MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002aa5000-0x00000000378b2000) (846MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x00000000378b2000-0x0000000037c51000) (3MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037c51000-0x0000000098307000) (1542MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000098307000-0x00000000cc1b1000) (830MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000cc1b1000-0x00000000cc1b7000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x00000000cc1b7000-0x00000000cc1da000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000cc1da000-0x00000000cf4b7000) (50MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000cf4b7000-0x00000000cf567000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000cf567000-0x00000000cf56f000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000cf56f000-0x00000000cf595000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000cf595000-0x00000000cf5a1000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000cf5a1000-0x00000000cf5dc000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000cf5dc000-0x00000000cf5ed000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000cf5ed000-0x00000000cf61f000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000cf61f000-0x00000000cf633000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000cf633000-0x00000000cf639000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000cf639000-0x00000000cf642000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000cf642000-0x00000000cf66a000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000cf66a000-0x00000000cf67f000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000cf67f000-0x00000000cf6b7000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000cf6b7000-0x00000000cf6cf000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000cf6cf000-0x00000000cf6ea000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000cf6ea000-0x00000000cf6f7000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000cf6f7000-0x00000000cf713000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000cf713000-0x00000000cf71f000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000cf71f000-0x00000000cf7e9000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000cf7e9000-0x00000000cf7f1000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x00000000cf7f1000-0x00000000cf817000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000cf817000-0x00000000cf823000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000cf823000-0x00000000cf85f000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x00000000cf85f000-0x00000000cf870000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000cf870000-0x00000000cf8a2000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x00000000cf8a2000-0x00000000cf8b6000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000cf8b6000-0x00000000cf8bd000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000cf8bd000-0x00000000cf8c6000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000cf8c6000-0x00000000cf8ed000) (0MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x00000000cf8ed000-0x00000000cf902000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000cf902000-0x00000000cf939000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x00000000cf939000-0x00000000cf951000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000cf951000-0x00000000cf982000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x00000000cf982000-0x00000000cf998000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000cf998000-0x00000000cf9e8000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x00000000cf9e8000-0x00000000cfa04000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000cfa04000-0x00000000cfa6a000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x00000000cfa6a000-0x00000000cfa72000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x00000000cfa72000-0x00000000cfa98000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x00000000cfa98000-0x00000000cfaa4000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x00000000cfaa4000-0x00000000cfadf000) (0MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x00000000cfadf000-0x00000000cfaf0000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000cfaf0000-0x00000000cfb22000) (0MB)
[ 0.000000] efi: mem56: type=7, attr=0xf, range=[0x00000000cfb22000-0x00000000cfb36000) (0MB)
[ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x00000000cfb36000-0x00000000cfb3c000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x00000000cfb3c000-0x00000000cfb45000) (0MB)
[ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x00000000cfb45000-0x00000000cfb6d000) (0MB)
[ 0.000000] efi: mem60: type=7, attr=0xf, range=[0x00000000cfb6d000-0x00000000cfb82000) (0MB)
[ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x00000000cfb82000-0x00000000cfbba000) (0MB)
[ 0.000000] efi: mem62: type=7, attr=0xf, range=[0x00000000cfbba000-0x00000000cfbbc000) (0MB)
[ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x00000000cfbbc000-0x00000000cfcec000) (1MB)
[ 0.000000] efi: mem64: type=7, attr=0xf, range=[0x00000000cfcec000-0x00000000cfcf4000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x00000000cfcf4000-0x00000000cfd1a000) (0MB)
[ 0.000000] efi: mem66: type=7, attr=0xf, range=[0x00000000cfd1a000-0x00000000cfd26000) (0MB)
[ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x00000000cfd26000-0x00000000cfd62000) (0MB)
[ 0.000000] efi: mem68: type=7, attr=0xf, range=[0x00000000cfd62000-0x00000000cfd73000) (0MB)
[ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x00000000cfd73000-0x00000000cfda5000) (0MB)
[ 0.000000] efi: mem70: type=7, attr=0xf, range=[0x00000000cfda5000-0x00000000cfdb9000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x00000000cfdb9000-0x00000000cfdc2000) (0MB)
[ 0.000000] efi: mem72: type=7, attr=0xf, range=[0x00000000cfdc2000-0x00000000cfdcb000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x00000000cfdcb000-0x00000000cfdef000) (0MB)
[ 0.000000] efi: mem74: type=7, attr=0xf, range=[0x00000000cfdef000-0x00000000cfe04000) (0MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000cfe04000-0x00000000cfe3c000) (0MB)
[ 0.000000] efi: mem76: type=7, attr=0xf, range=[0x00000000cfe3c000-0x00000000cfe54000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000cfe54000-0x00000000cfe89000) (0MB)
[ 0.000000] efi: mem78: type=7, attr=0xf, range=[0x00000000cfe89000-0x00000000cfe9f000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x00000000cfe9f000-0x00000000cff6f000) (0MB)
[ 0.000000] efi: mem80: type=7, attr=0xf, range=[0x00000000cff6f000-0x00000000cff77000) (0MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x00000000cff77000-0x00000000cffa0000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x00000000cffa0000-0x00000000cffa3000) (0MB)
[ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x00000000cffa3000-0x00000000d00c1000) (1MB)
[ 0.000000] efi: mem84: type=7, attr=0xf, range=[0x00000000d00c1000-0x00000000d00c3000) (0MB)
[ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x00000000d00c3000-0x00000000d010d000) (0MB)
[ 0.000000] efi: mem86: type=7, attr=0xf, range=[0x00000000d010d000-0x00000000d010e000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000d010e000-0x00000000d01f9000) (0MB)
[ 0.000000] efi: mem88: type=7, attr=0xf, range=[0x00000000d01f9000-0x00000000d0201000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000d0201000-0x00000000d0348000) (1MB)
[ 0.000000] efi: mem90: type=7, attr=0xf, range=[0x00000000d0348000-0x00000000d034b000) (0MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000d034b000-0x00000000d03a0000) (0MB)
[ 0.000000] efi: mem92: type=7, attr=0xf, range=[0x00000000d03a0000-0x00000000d03a4000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000d03a4000-0x00000000d0491000) (0MB)
[ 0.000000] efi: mem94: type=7, attr=0xf, range=[0x00000000d0491000-0x00000000d0499000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000d0499000-0x00000000d0595000) (0MB)
[ 0.000000] efi: mem96: type=7, attr=0xf, range=[0x00000000d0595000-0x00000000d0596000) (0MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000d0596000-0x00000000d05df000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x00000000d05df000-0x00000000d05e1000) (0MB)
[ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x00000000d05e1000-0x00000000d061b000) (0MB)
[ 0.000000] efi: mem100: type=7, attr=0xf, range=[0x00000000d061b000-0x00000000d061c000) (0MB)
[ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x00000000d061c000-0x00000000d067e000) (0MB)
[ 0.000000] efi: mem102: type=7, attr=0xf, range=[0x00000000d067e000-0x00000000d0683000) (0MB)
[ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x00000000d0683000-0x00000000d0715000) (0MB)
[ 0.000000] efi: mem104: type=7, attr=0xf, range=[0x00000000d0715000-0x00000000d071d000) (0MB)
[ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x00000000d071d000-0x00000000d07ce000) (0MB)
[ 0.000000] efi: mem106: type=7, attr=0xf, range=[0x00000000d07ce000-0x00000000d07d5000) (0MB)
[ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x00000000d07d5000-0x00000000d0818000) (0MB)
[ 0.000000] efi: mem108: type=7, attr=0xf, range=[0x00000000d0818000-0x00000000d081c000) (0MB)
[ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x00000000d081c000-0x00000000d0866000) (0MB)
[ 0.000000] efi: mem110: type=7, attr=0xf, range=[0x00000000d0866000-0x00000000d086c000) (0MB)
[ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x00000000d086c000-0x00000000d0888000) (0MB)
[ 0.000000] efi: mem112: type=7, attr=0xf, range=[0x00000000d0888000-0x00000000d088a000) (0MB)
[ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x00000000d088a000-0x00000000d08bb000) (0MB)
[ 0.000000] efi: mem114: type=7, attr=0xf, range=[0x00000000d08bb000-0x00000000d08bc000) (0MB)
[ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x00000000d08bc000-0x00000000d0920000) (0MB)
[ 0.000000] efi: mem116: type=7, attr=0xf, range=[0x00000000d0920000-0x00000000d0921000) (0MB)
[ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x00000000d0921000-0x00000000d0d17000) (3MB)
[ 0.000000] efi: mem118: type=7, attr=0xf, range=[0x00000000d0d17000-0x00000000d0d1d000) (0MB)
[ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x00000000d0d1d000-0x00000000d0e93000) (1MB)
[ 0.000000] efi: mem120: type=7, attr=0xf, range=[0x00000000d0e93000-0x00000000d0e94000) (0MB)
[ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x00000000d0e94000-0x00000000d1163000) (2MB)
[ 0.000000] efi: mem122: type=7, attr=0xf, range=[0x00000000d1163000-0x00000000d1165000) (0MB)
[ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x00000000d1165000-0x00000000d1171000) (0MB)
[ 0.000000] efi: mem124: type=7, attr=0xf, range=[0x00000000d1171000-0x00000000d1172000) (0MB)
[ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x00000000d1172000-0x00000000d1877000) (7MB)
[ 0.000000] efi: mem126: type=7, attr=0xf, range=[0x00000000d1877000-0x00000000d1879000) (0MB)
[ 0.000000] efi: mem127: type=4, attr=0xf, range=[0x00000000d1879000-0x00000000dbf98000) (167MB)
[ 0.000000] efi: mem128: type=7, attr=0xf, range=[0x00000000dbf98000-0x00000000dc54a000) (5MB)
[ 0.000000] efi: mem129: type=2, attr=0xf, range=[0x00000000dc54a000-0x00000000dc556000) (0MB)
[ 0.000000] efi: mem130: type=3, attr=0xf, range=[0x00000000dc556000-0x00000000dcd1d000) (7MB)
[ 0.000000] efi: mem131: type=0, attr=0xf, range=[0x00000000dcd1d000-0x00000000dcdf5000) (0MB)
[ 0.000000] efi: mem132: type=0, attr=0xf, range=[0x00000000dcdf5000-0x00000000dd155000) (3MB)
[ 0.000000] efi: mem133: type=9, attr=0xf, range=[0x00000000dd155000-0x00000000dd15c000) (0MB)
[ 0.000000] efi: mem134: type=9, attr=0xf, range=[0x00000000dd15c000-0x00000000dd165000) (0MB)
[ 0.000000] efi: mem135: type=10, attr=0xf, range=[0x00000000dd165000-0x00000000dd484000) (3MB)
[ 0.000000] efi: mem136: type=10, attr=0xf, range=[0x00000000dd484000-0x00000000dd6d1000) (2MB)
[ 0.000000] efi: mem137: type=6, attr=0x800000000000000f, range=[0x00000000dd6d1000-0x00000000dddf2000) (7MB)
[ 0.000000] efi: mem138: type=6, attr=0x800000000000000f, range=[0x00000000dddf2000-0x00000000de439000) (6MB)
[ 0.000000] efi: mem139: type=6, attr=0x800000000000000f, range=[0x00000000de439000-0x00000000de43d000) (0MB)
[ 0.000000] efi: mem140: type=6, attr=0x800000000000000f, range=[0x00000000de43d000-0x00000000de50b000) (0MB)
[ 0.000000] efi: mem141: type=5, attr=0x800000000000000f, range=[0x00000000de50b000-0x00000000de51d000) (0MB)
[ 0.000000] efi: mem142: type=5, attr=0x800000000000000f, range=[0x00000000de51d000-0x00000000de566000) (0MB)
[ 0.000000] efi: mem143: type=4, attr=0xf, range=[0x00000000de566000-0x00000000de567000) (0MB)
[ 0.000000] efi: mem144: type=10, attr=0xf, range=[0x00000000de567000-0x00000000de76d000) (2MB)
[ 0.000000] efi: mem145: type=4, attr=0xf, range=[0x00000000de76d000-0x00000000de8bf000) (1MB)
[ 0.000000] efi: mem146: type=3, attr=0xf, range=[0x00000000de8bf000-0x00000000deb65000) (2MB)
[ 0.000000] efi: mem147: type=4, attr=0xf, range=[0x00000000deb65000-0x00000000deb7f000) (0MB)
[ 0.000000] efi: mem148: type=3, attr=0xf, range=[0x00000000deb7f000-0x00000000deb9b000) (0MB)
[ 0.000000] efi: mem149: type=4, attr=0xf, range=[0x00000000deb9b000-0x00000000deba7000) (0MB)
[ 0.000000] efi: mem150: type=6, attr=0x800000000000000f, range=[0x00000000deba7000-0x00000000deff4000) (4MB)
[ 0.000000] efi: mem151: type=4, attr=0xf, range=[0x00000000deff4000-0x00000000df000000) (0MB)
[ 0.000000] efi: mem152: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f000000) (4592MB)
[ 0.000000] efi: mem153: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem154: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
[ 0.000000] efi: mem155: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem156: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/A88X-PRO, BIOS 1001 04/01/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000D0000000 mask FFFFF8000000 write-back
[ 0.000000] 4 base 0000D8000000 mask FFFFFC000000 write-back
[ 0.000000] 5 base 0000DC000000 mask FFFFFE000000 write-back
[ 0.000000] 6 base 0000DE000000 mask FFFFFF000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02980000, 0x02980fff] PGTABLE
[ 0.000000] BRK [0x02981000, 0x02981fff] PGTABLE
[ 0.000000] BRK [0x02982000, 0x02982fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x02983000, 0x02983fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdcd1cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xdcbfffff] page 2M
[ 0.000000] [mem 0xdcc00000-0xdcd1cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xde566000-0xde566fff]
[ 0.000000] [mem 0xde566000-0xde566fff] page 4k
[ 0.000000] BRK [0x02984000, 0x02984fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xde76d000-0xdeba6fff]
[ 0.000000] [mem 0xde76d000-0xde7fffff] page 4k
[ 0.000000] [mem 0xde800000-0xde9fffff] page 2M
[ 0.000000] [mem 0xdea00000-0xdeba6fff] page 4k
[ 0.000000] BRK [0x02985000, 0x02985fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[ 0.000000] [mem 0xdeff4000-0xdeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x378b2000-0x37c50fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DD15C000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD15C080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD162CA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000DD15C188 006B16 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DD6C6080 000040
[ 0.000000] ACPI: APIC 0x00000000DD162DB0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD162E30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DD162E78 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: CRAT 0x00000000DD163ED8 000528 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DD162F10 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x00000000DD162F48 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x00000000DD162FC0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DD162FF8 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DD163B98 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[ 0.000000] NODE_DATA [mem 0x21eff7000-0x21effbfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xdcd1cfff]
[ 0.000000] node 0: [mem 0xde566000-0xde566fff]
[ 0.000000] node 0: [mem 0xde76d000-0xdeba6fff]
[ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
[ 0.000000] On node 0 totalpages: 2081027
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12325 pages used for memmap
[ 0.000000] DMA32 zone: 901476 pages, LIFO batch:31
[ 0.000000] Normal zone: 16072 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcd1d000-0xdd154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd155000-0xdd164fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd165000-0xdd6d0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd6d1000-0xde50afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde50b000-0xde565fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde567000-0xde76cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdeba7000-0xdeff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff88021de00000 s1920832 r8192 d20672 u2097152
[ 0.000000] pcpu-alloc: s1920832 r8192 d20672 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052548
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-rc6+ root=/dev/mapper/VG--Debian-LV--sid ro init=/bin/systemd quiet radeon.lockup_timeout=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 7819496K/8324108K available (4001K kernel code, 826K rwdata, 2284K rodata, 2700K init, 14368K bss, 504612K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8671 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4100.463 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 8200.92 BogoMIPS (lpj=16401852)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140424
[ 0.008056] ACPI: All ACPI Tables successfully acquired
[ 0.264378] Security Framework initialized
[ 0.264381] SELinux: Disabled at boot.
[ 0.265632] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.268018] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.268935] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.268958] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.269582] Initializing cgroup subsys devices
[ 0.269608] Initializing cgroup subsys freezer
[ 0.269621] Initializing cgroup subsys net_cls
[ 0.269630] Initializing cgroup subsys blkio
[ 0.269639] Initializing cgroup subsys net_prio
[ 0.269679] tseg: 00df000000
[ 0.269681] CPU: Physical Processor ID: 0
[ 0.269682] CPU: Processor Core ID: 0
[ 0.269684] mce: CPU supports 7 MCE banks
[ 0.269689] LVT offset 1 assigned for vector 0xf9
[ 0.269696] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.269696] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.269696] tlb_flushall_shift: 6
[ 0.269798] Freeing SMP alternatives memory: 12K (ffffffff81b73000 - ffffffff81b76000)
[ 0.280095] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.319825] smpboot: CPU0: AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G (fam: 15, model: 30, stepping: 01)
[ 0.425951] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.425961] ... version: 0
[ 0.425962] ... bit width: 48
[ 0.425963] ... generic registers: 6
[ 0.425964] ... value mask: 0000ffffffffffff
[ 0.425965] ... max period: 00007fffffffffff
[ 0.425966] ... fixed-purpose events: 0
[ 0.425967] ... event mask: 000000000000003f
[ 0.426767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.427188] x86: Booting SMP configuration:
[ 0.427190] .... node #0, CPUs: #1 #2 #3
[ 0.467132] x86: Booted up 1 node, 4 CPUs
[ 0.467136] smpboot: Total of 4 processors activated (32803.70 BogoMIPS)
[ 0.467570] __sdt_alloc: allocated ffff8802155ea4c0 with cpus:
[ 0.467574] __sdt_alloc: allocated ffff8802155ea3c0 with cpus:
[ 0.467576] __sdt_alloc: allocated ffff8802155ea2c0 with cpus:
[ 0.467577] __sdt_alloc: allocated ffff8802155ea1c0 with cpus:
[ 0.467582] __sdt_alloc: allocated ffff8802155ea0c0 with cpus:
[ 0.467589] __sdt_alloc: allocated ffff880215798f40 with cpus:
[ 0.467591] __sdt_alloc: allocated ffff880215798e40 with cpus:
[ 0.467593] __sdt_alloc: allocated ffff880215798d40 with cpus:
[ 0.467599] __sdt_alloc: allocated ffff880215798c40 with cpus:
[ 0.467600] __sdt_alloc: allocated ffff880215798b40 with cpus:
[ 0.467602] __sdt_alloc: allocated ffff880215798a40 with cpus:
[ 0.467604] __sdt_alloc: allocated ffff880215798940 with cpus:
[ 0.467627] build_sched_domain: cpu: 0 level: SMT cpu_map: 0-3 tl->mask: 0-1
[ 0.467629] build_sched_domain: cpu: 0 level: MC cpu_map: 0-3 tl->mask: 0-3
[ 0.467631] build_sched_domain: cpu: 1 level: SMT cpu_map: 0-3 tl->mask: 0-1
[ 0.467632] build_sched_domain: cpu: 1 level: MC cpu_map: 0-3 tl->mask: 0-3
[ 0.467634] build_sched_domain: cpu: 2 level: SMT cpu_map: 0-3 tl->mask: 2-3
[ 0.467635] build_sched_domain: cpu: 2 level: MC cpu_map: 0-3 tl->mask: 0-3
[ 0.467637] build_sched_domain: cpu: 3 level: SMT cpu_map: 0-3 tl->mask: 2-3
[ 0.467638] build_sched_domain: cpu: 3 level: MC cpu_map: 0-3 tl->mask: 0-3
[ 0.467640] build_sched_groups: got group ffff8802155ea4c0 with cpus:
[ 0.467642] build_sched_groups: got group ffff8802155ea3c0 with cpus:
[ 0.467643] build_sched_groups: got group ffff8802155ea0c0 with cpus:
[ 0.467644] build_sched_groups: got group ffff880215798e40 with cpus:
[ 0.467646] build_sched_groups: got group ffff8802155ea2c0 with cpus:
[ 0.467647] build_sched_groups: got group ffff8802155ea1c0 with cpus:
[ 0.468285] devtmpfs: initialized
[ 0.474492] PM: Registering ACPI NVS region [mem 0xdd165000-0xdd6d0fff] (5685248 bytes)
[ 0.474688] PM: Registering ACPI NVS region [mem 0xde567000-0xde76cfff] (2121728 bytes)
[ 0.475517] regulator-dummy: no parameters
[ 0.475766] NET: Registered protocol family 16
[ 0.476056] cpuidle: using governor ladder
[ 0.476060] cpuidle: using governor menu
[ 0.476125] ACPI: bus type PCI registered
[ 0.476348] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.476350] PCI: not using MMCONFIG
[ 0.476352] PCI: Using configuration type 1 for base access
[ 0.476353] PCI: Using configuration type 1 for extended access
[ 0.491522] ACPI: Added _OSI(Module Device)
[ 0.491526] ACPI: Added _OSI(Processor Device)
[ 0.491528] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.491529] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.499582] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.505694] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.506466] ACPI: Interpreter enabled
[ 0.506473] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.506477] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.506512] ACPI: (supports S0 S3 S4 S5)
[ 0.506514] ACPI: Using IOAPIC for interrupt routing
[ 0.506693] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.506747] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.506847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.508397] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.508850] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.509403] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.618719] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.618727] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.619104] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.619451] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.619887] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.620033] PCI host bridge to bus 0000:00
[ 0.620036] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.620038] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.620040] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.620042] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.620044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.620046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.620048] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.620049] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.620077] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.620400] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.620708] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.620946] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
[ 0.621040] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.621197] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.621327] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.621572] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.621856] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.621886] pci 0000:00:10.0: reg 0x10: [mem 0xfeb06000-0xfeb07fff 64bit]
[ 0.622026] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.622160] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.622315] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.622344] pci 0000:00:10.1: reg 0x10: [mem 0xfeb04000-0xfeb05fff 64bit]
[ 0.622482] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.622613] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.622750] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.622774] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.622787] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.622798] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.622810] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.622822] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.622834] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0c000-0xfeb0c7ff]
[ 0.623096] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.623113] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0b000-0xfeb0bfff]
[ 0.623297] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.623435] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.623459] pci 0000:00:12.2: reg 0x10: [mem 0xfeb0a000-0xfeb0a0ff]
[ 0.623568] pci 0000:00:12.2: supports D1 D2
[ 0.623570] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.623689] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.623817] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.623833] pci 0000:00:13.0: reg 0x10: [mem 0xfeb09000-0xfeb09fff]
[ 0.624015] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.624142] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.624166] pci 0000:00:13.2: reg 0x10: [mem 0xfeb08000-0xfeb080ff]
[ 0.624275] pci 0000:00:13.2: supports D1 D2
[ 0.624276] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.624394] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.624537] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.624815] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.624842] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.624929] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.625047] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.625167] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.625451] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.625603] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.625733] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.625842] pci 0000:00:15.0: supports D1 D2
[ 0.625844] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[ 0.625973] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.626099] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.626209] pci 0000:00:15.1: supports D1 D2
[ 0.626210] pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
[ 0.626342] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.626467] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.626576] pci 0000:00:15.2: supports D1 D2
[ 0.626577] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[ 0.626703] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.626833] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.627058] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.627278] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.627509] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.627744] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.627962] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.628312] pci 0000:01:00.0: [1002:665c] type 00 class 0x030000
[ 0.628335] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.628350] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.628361] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.628371] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[ 0.628381] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.628465] pci 0000:01:00.0: supports D1 D2
[ 0.628467] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.628652] pci 0000:01:00.1: [1002:0002] type 00 class 0x040300
[ 0.628671] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.628767] pci 0000:01:00.1: supports D1 D2
[ 0.628960] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.628966] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.628970] pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.628976] pci 0000:00:02.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
[ 0.629117] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.629128] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.629130] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.629132] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.629133] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.629136] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.629138] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.629140] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.629257] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.629415] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.629450] pci 0000:04:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[ 0.629623] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.635595] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.635608] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.635792] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.635815] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.635844] pci 0000:05:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
[ 0.635864] pci 0000:05:00.0: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.635988] pci 0000:05:00.0: supports D1 D2
[ 0.635990] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.636068] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.643602] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.643613] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.643618] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.643625] pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.644780] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.644888] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.644999] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.645109] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.645201] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.645277] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.645352] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.645427] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.645824] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.646369] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.646375] vgaarb: loaded
[ 0.646376] vgaarb: bridge control possible 0000:01:00.0
[ 0.646752] PCI: Using ACPI for IRQ routing
[ 0.649030] PCI: pci_cache_line_size set to 64 bytes
[ 0.649133] e820: reserve RAM buffer [mem 0xdcd1d000-0xdfffffff]
[ 0.649139] e820: reserve RAM buffer [mem 0xde567000-0xdfffffff]
[ 0.649142] e820: reserve RAM buffer [mem 0xdeba7000-0xdfffffff]
[ 0.649144] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.649145] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.649677] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.649681] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.651859] Switched to clocksource hpet
[ 0.663212] pnp: PnP ACPI init
[ 0.663257] ACPI: bus type PNP registered
[ 0.663463] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.663482] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.663658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.663834] system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.663839] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664120] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.664125] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664224] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.664451] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.664456] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664580] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664956] pnp 00:07: [dma 0 disabled]
[ 0.665062] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.665490] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.665493] system 00:08: [io 0x040b] has been reserved
[ 0.665496] system 00:08: [io 0x04d6] has been reserved
[ 0.665499] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.665501] system 00:08: [io 0x0c14] has been reserved
[ 0.665503] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.665506] system 00:08: [io 0x0c52] has been reserved
[ 0.665508] system 00:08: [io 0x0c6c] has been reserved
[ 0.665510] system 00:08: [io 0x0c6f] has been reserved
[ 0.665512] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.665514] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.665517] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.665519] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.665521] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.665523] system 00:08: [io 0x0800-0x089f] could not be reserved
[ 0.665526] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.665528] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.665530] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.665532] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.665536] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.665538] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.665541] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.665543] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.665546] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.665548] system 00:08: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.665551] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.665555] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.665848] pnp: PnP ACPI: found 9 devices
[ 0.665849] ACPI: bus type PNP unregistered
[ 0.676214] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.676219] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.676225] pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.676229] pci 0000:00:02.1: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
[ 0.676235] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.676249] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.676262] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.676268] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.676277] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.676280] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.676285] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.676289] pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.676297] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.676298] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.676300] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.676301] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.676303] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.676304] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.676306] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff]
[ 0.676308] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.676309] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.676311] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
[ 0.676313] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.676314] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.676316] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.676317] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.676319] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.676320] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.676322] pci_bus 0000:02: resource 10 [mem 0xe0000000-0xffffffff]
[ 0.676323] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.676325] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.676326] pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.676328] pci_bus 0000:05: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.676495] NET: Registered protocol family 2
[ 0.677181] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.678115] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
[ 0.681223] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.681297] TCP: reno registered
[ 0.681421] UDP hash table entries: 4096 (order: 7, 786432 bytes)
[ 0.681933] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes)
[ 0.682613] NET: Registered protocol family 1
[ 0.852864] pci 0000:01:00.0: Boot video device
[ 0.853174] PCI: CLS 64 bytes, default 64
[ 0.853369] Unpacking initramfs...
[ 0.914792] Freeing initrd memory: 3708K (ffff8800378b2000 - ffff880037c51000)
[ 1.029176] AMD-Vi: IOMMU performance counters supported
[ 1.029402] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 1.029405] pci 0000:00:00.2: PCI INT A: no GSI
[ 1.029882] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.029884] AMD-Vi: Extended features: PPR GT IA PC
[ 1.029929] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[ 1.037599] AMD-Vi: Using passthrough domain for device 0000:01:00.0
[ 1.038463] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.038923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.038925] software IO TLB [mem 0xcb4b7000-0xcf4b7000] (64MB) mapped at [ffff8800cb4b7000-ffff8800cf4b6fff]
[ 1.039521] perf: AMD NB counters detected
[ 1.039542] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 1.039551] LVT offset 0 assigned for vector 0x400
[ 1.039569] perf: AMD IBS detected (0x000001ff)
[ 1.040375] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.040433] Initialise system trusted keyring
[ 1.040507] audit: initializing netlink subsys (disabled)
[ 1.040570] audit: type=2000 audit(1406102416.688:1): initialized
[ 1.041454] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.041527] zbud: loaded
[ 1.041847] VFS: Disk quotas dquot_6.5.2
[ 1.041877] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.042086] msgmni has been set to 15704
[ 1.042608] alg: No test for stdrng (krng)
[ 1.042661] bounce: pool size: 64 pages
[ 1.042687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.042698] io scheduler noop registered
[ 1.042701] io scheduler deadline registered
[ 1.042820] io scheduler cfq registered (default)
[ 1.042823] start plist test
[ 1.044206] end plist test
[ 1.045517] GHES: HEST is not enabled!
[ 1.045707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.066224] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.067420] Linux agpgart interface v0.103
[ 1.067709] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.070109] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.070132] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.070640] mousedev: PS/2 mouse device common for all mice
[ 1.070814] rtc_cmos 00:04: RTC can wake from S4
[ 1.071059] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.071086] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.071126] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.071142] drop_monitor: Initializing network drop monitor service
[ 1.071241] TCP: cubic registered
[ 1.071352] NET: Registered protocol family 10
[ 1.071888] mip6: Mobile IPv6
[ 1.071899] NET: Registered protocol family 17
[ 1.071923] Key type dns_resolver registered
[ 1.072996] Loading compiled-in X.509 certificates
[ 1.073029] registered taskstats version 1
[ 1.074026] rtc_cmos 00:04: setting system clock to 2014-07-23 08:00:17 UTC (1406102417)
[ 1.074204] PM: Hibernation image not present or could not be loaded.
[ 1.077247] Freeing unused kernel memory: 2700K (ffffffff818d0000 - ffffffff81b73000)
[ 1.077250] Write protecting the kernel read-only data: 8192k
[ 1.077957] Freeing unused kernel memory: 84K (ffff8800013eb000 - ffff880001400000)
[ 1.082375] Freeing unused kernel memory: 1812K (ffff88000163b000 - ffff880001800000)
[ 1.100960] systemd-udevd[70]: starting version 204
[ 1.142548] SCSI subsystem initialized
[ 1.143663] libata version 3.00 loaded.
[ 1.144652] ahci 0000:00:11.0: version 3.0
[ 1.145200] ahci 0000:00:11.0: irq 73 for MSI/MSI-X
[ 1.145363] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.145366] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
[ 1.149456] scsi0 : ahci
[ 1.150745] scsi1 : ahci
[ 1.151548] scsi2 : ahci
[ 1.152216] scsi3 : ahci
[ 1.153484] scsi4 : ahci
[ 1.154277] scsi5 : ahci
[ 1.154529] scsi6 : ahci
[ 1.155197] scsi7 : ahci
[ 1.156358] ata1: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c100 irq 73
[ 1.156362] ata2: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c180 irq 73
[ 1.156365] ata3: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c200 irq 73
[ 1.156368] ata4: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c280 irq 73
[ 1.156370] ata5: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c300 irq 73
[ 1.156372] ata6: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c380 irq 73
[ 1.156375] ata7: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c400 irq 73
[ 1.156377] ata8: SATA max UDMA/133 abar m2048@0xfeb0c000 port 0xfeb0c480 irq 73
[ 1.476940] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.477095] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.477140] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.477201] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.477236] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.477270] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.649111] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.649239] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.649964] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.649968] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 1.649970] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.650255] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.650259] ata1.00: configured for UDMA/133
[ 1.650505] ata3.00: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133
[ 1.650507] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.650847] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 1.652041] ata3.00: configured for UDMA/133
[ 1.652202] scsi 2:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5
[ 1.660511] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.660550] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.660554] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.660681] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.660684] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.660687] sd 0:0:0:0: [sda] Write Protect is off
[ 1.660690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.660733] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.660741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.663652] sda: sda1 sda2 sda3 sda4 sda5
[ 1.665090] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.678011] sdb: sdb1 sdb2 < sdb5 >
[ 1.678973] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.861738] device-mapper: uevent: version 1.0.3
[ 1.861991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.866890] random: lvm urandom read with 42 bits of entropy available
[ 1.981813] PM: Starting manual resume from disk
[ 1.981820] PM: Hibernation image partition 254:1 present
[ 1.981821] PM: Looking for hibernation image.
[ 1.982091] PM: Image not found (code -22)
[ 1.982093] PM: Hibernation image not present or could not be loaded.
[ 1.996986] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.037486] tsc: Refined TSC clocksource calibration: 4100.302 MHz
[ 2.065387] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.071807] systemd[1]: Inserted module 'autofs4'
[ 2.072416] systemd[1]: Set hostname to <kaveri>.
[ 2.157818] systemd[1]: Starting Syslog Socket.
[ 2.157907] systemd[1]: Listening on Syslog Socket.
[ 2.157919] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.158080] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.158091] systemd[1]: Starting Remote File Systems (Pre).
[ 2.158107] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.158117] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.158159] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.158168] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.158213] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.158222] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.158277] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.158296] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.158395] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.158403] systemd[1]: Starting Paths.
[ 2.158418] systemd[1]: Reached target Paths.
[ 2.158490] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.158821] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.158832] systemd[1]: Starting Journal Socket.
[ 2.158956] systemd[1]: Listening on Journal Socket.
[ 2.158968] systemd[1]: Starting Syslog.
[ 2.158983] systemd[1]: Reached target Syslog.
[ 2.159017] systemd[1]: Mounting Huge Pages File System...
[ 2.160420] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.161850] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.164111] systemd[1]: Starting Load Kernel Modules...
[ 2.165105] systemd[1]: Mounting Debug File System...
[ 2.166849] systemd[1]: Starting Apply Kernel Variables...
[ 2.168719] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.169807] systemd[1]: Starting Journal Service...
[ 2.171223] systemd[1]: Started Journal Service.
[ 2.172046] fuse init (API version 7.23)
[ 2.182502] systemd-journald[183]: Vacuuming done, freed 0 bytes
[ 2.272611] systemd-udevd[207]: starting version 204
[ 2.343982] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.344042] ACPI: Power Button [PWRB]
[ 2.344212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.344216] ACPI: Power Button [PWRF]
[ 2.356941] ACPI: acpi_idle registered with cpuidle
[ 2.357028] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 2.357124] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 2.357528] ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 2.357534] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB21.VGA_.LCD_._BCM] (Node ffff88021d84b770), AE_NOT_FOUND (20140424/psparse-536)
[ 2.357546] ACPI Error: Evaluating _BCM failed (20140424/video-384)
[ 2.357847] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input4
[ 2.370457] wmi: Mapper loaded
[ 2.370998] ACPI: bus type USB registered
[ 2.371082] usbcore: registered new interface driver usbfs
[ 2.371149] usbcore: registered new interface driver hub
[ 2.372488] usbcore: registered new device driver usb
[ 2.380836] QUIRK: Enable AMD PLL fix
[ 2.380876] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.380991] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.381336] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 2.381344] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 2.381351] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 2.381359] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 2.381366] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[ 2.385140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.385144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.385146] usb usb1: Product: xHCI Host Controller
[ 2.385148] usb usb1: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.385151] usb usb1: SerialNumber: 0000:00:10.0
[ 2.387051] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.401247] hub 1-0:1.0: USB hub found
[ 2.401328] hub 1-0:1.0: 2 ports detected
[ 2.409901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.410146] ehci-pci: EHCI PCI platform driver
[ 2.410492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 2.411030] [drm] Initialized drm 1.1.0 20060810
[ 2.415093] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.437920] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.437935] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.439573] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.439579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.439581] usb usb2: Product: xHCI Host Controller
[ 2.439584] usb usb2: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.439586] usb usb2: SerialNumber: 0000:00:10.0
[ 2.446896] hub 2-0:1.0: USB hub found
[ 2.446951] hub 2-0:1.0: 2 ports detected
[ 2.447902] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.447921] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 2.447928] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.447942] ehci-pci 0000:00:12.2: debug port 1
[ 2.448054] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb0a000
[ 2.458325] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.458487] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.458492] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.458495] usb usb3: Product: EHCI Host Controller
[ 2.458498] usb usb3: Manufacturer: Linux 3.16.0-rc6+ ehci_hcd
[ 2.458501] usb usb3: SerialNumber: 0000:00:12.2
[ 2.460341] hub 3-0:1.0: USB hub found
[ 2.460371] hub 3-0:1.0: 5 ports detected
[ 2.462177] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.462197] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.462207] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.462225] ehci-pci 0000:00:13.2: debug port 1
[ 2.462281] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb08000
[ 2.464503] [drm] radeon kernel modesetting enabled.
[ 2.471977] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665C 0x1787:0x200F).
[ 2.472009] [drm] register mmio base: 0xFEA00000
[ 2.472010] [drm] register mmio size: 262144
[ 2.472016] [drm] doorbell mmio base: 0xF0000000
[ 2.472017] [drm] doorbell mmio size: 8388608
[ 2.472118] radeon 0000:01:00.0: Invalid ROM contents
[ 2.472218] ATOM BIOS: BONAIRE
[ 2.472306] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.472308] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.472310] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.472311] [drm] RAM width 128bits DDR
[ 2.473838] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.475043] [TTM] Zone kernel: Available graphics memory: 4022742 kiB
[ 2.475046] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.475048] [TTM] Initializing pool allocator
[ 2.475081] [TTM] Initializing DMA pool allocator
[ 2.475503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.475508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.475511] usb usb4: Product: EHCI Host Controller
[ 2.475514] usb usb4: Manufacturer: Linux 3.16.0-rc6+ ehci_hcd
[ 2.475516] usb usb4: SerialNumber: 0000:00:13.2
[ 2.478858] [drm] radeon: 1024M of VRAM memory ready
[ 2.478863] [drm] radeon: 1024M of GTT memory ready.
[ 2.478965] [drm] Loading BONAIRE Microcode
[ 2.479971] hub 4-0:1.0: USB hub found
[ 2.479997] hub 4-0:1.0: 5 ports detected
[ 2.482162] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.485085] ohci-pci: OHCI PCI platform driver
[ 2.485546] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.488767] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.489189] [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
[ 2.489322] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.490056] [drm] Internal thermal controller with fan control
[ 2.494742] [drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[ 2.495303] random: nonblocking pool is initialized
[ 2.495425] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.495447] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 2.495737] xhci_hcd 0000:00:10.1: irq 79 for MSI/MSI-X
[ 2.495750] xhci_hcd 0000:00:10.1: irq 80 for MSI/MSI-X
[ 2.495762] xhci_hcd 0000:00:10.1: irq 81 for MSI/MSI-X
[ 2.495772] xhci_hcd 0000:00:10.1: irq 82 for MSI/MSI-X
[ 2.495783] xhci_hcd 0000:00:10.1: irq 83 for MSI/MSI-X
[ 2.496246] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.496250] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.496253] usb usb5: Product: xHCI Host Controller
[ 2.496256] usb usb5: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.496258] usb usb5: SerialNumber: 0000:00:10.1
[ 2.506828] [drm] radeon: dpm initialized
[ 2.509104] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 2.509149] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.511131] hub 5-0:1.0: USB hub found
[ 2.511195] hub 5-0:1.0: 2 ports detected
[ 2.511344] [drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[ 2.511360] [drm] PCIE gen 3 link speeds already enabled
[ 2.514643] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 2.514890] radeon 0000:01:00.0: WB enabled
[ 2.514919] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880212014c00
[ 2.514922] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880212014c04
[ 2.514924] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880212014c08
[ 2.514926] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880212014c0c
[ 2.514928] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880212014c10
[ 2.515326] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900055b6c98
[ 2.515392] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880212014c18
[ 2.515394] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880212014c1c
[ 2.515399] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.515400] [drm] Driver supports precise vblank timestamp query.
[ 2.515475] radeon 0000:01:00.0: irq 84 for MSI/MSI-X
[ 2.515502] radeon 0000:01:00.0: radeon: using MSI.
[ 2.515586] [drm] radeon: irq initialized.
[ 2.516013] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 2.516025] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 2.516572] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.516576] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.516579] usb usb6: Product: xHCI Host Controller
[ 2.516581] usb usb6: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.516583] usb usb6: SerialNumber: 0000:00:10.1
[ 2.526223] hub 6-0:1.0: USB hub found
[ 2.526465] hub 6-0:1.0: 2 ports detected
[ 2.527533] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.527550] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[ 2.527957] [drm] ring test on 0 succeeded in 2 usecs
[ 2.528073] [drm] ring test on 1 succeeded in 2 usecs
[ 2.528104] [drm] ring test on 2 succeeded in 2 usecs
[ 2.528254] [drm] ring test on 3 succeeded in 2 usecs
[ 2.528264] [drm] ring test on 4 succeeded in 2 usecs
[ 2.534483] EDAC MC: Ver: 3.0.0
[ 2.538846] MCE: In-kernel MCE decoding enabled.
[ 2.539718] AMD64 EDAC driver v3.4.0
[ 2.539781] EDAC amd64: DRAM ECC disabled.
[ 2.539787] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 2.539787] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 2.539787] (Note that use of the override may cause unknown side effects.)
[ 2.546928] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.546956] r8169 0000:05:00.0: enabling device (0000 -> 0003)
[ 2.554298] r8169 0000:05:00.0: irq 85 for MSI/MSI-X
[ 2.554956] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc90005488000, d8:50:e6:4e:62:1d, XID 0c000800 IRQ 85
[ 2.554959] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.561619] microcode: CPU0: patch_level=0x06003104
[ 2.561753] microcode: CPU1: patch_level=0x06003104
[ 2.561768] microcode: CPU2: patch_level=0x06003104
[ 2.561782] microcode: CPU3: patch_level=0x06003104
[ 2.561933] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.569451] AVX version of gcm_enc/dec engaged.
[ 2.573312] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.574227] [drm] ring test on 5 succeeded in 1 usecs
[ 2.584279] [drm] UVD initialized successfully.
[ 2.585115] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.585130] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 2.585229] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0b000
[ 2.585790] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.587062] xhci_hcd 0000:04:00.0: irq 86 for MSI/MSI-X
[ 2.587072] xhci_hcd 0000:04:00.0: irq 87 for MSI/MSI-X
[ 2.587079] xhci_hcd 0000:04:00.0: irq 88 for MSI/MSI-X
[ 2.587086] xhci_hcd 0000:04:00.0: irq 89 for MSI/MSI-X
[ 2.587094] xhci_hcd 0000:04:00.0: irq 90 for MSI/MSI-X
[ 2.587387] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.587390] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.587392] usb usb7: Product: xHCI Host Controller
[ 2.587394] usb usb7: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.587396] usb usb7: SerialNumber: 0000:04:00.0
[ 2.587954] hub 7-0:1.0: USB hub found
[ 2.587974] hub 7-0:1.0: 2 ports detected
[ 2.588000] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.588326] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.588336] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 2.588443] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.588445] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.588447] usb usb9: Product: xHCI Host Controller
[ 2.588449] usb usb9: Manufacturer: Linux 3.16.0-rc6+ xhci_hcd
[ 2.588450] usb usb9: SerialNumber: 0000:04:00.0
[ 2.593400] hub 9-0:1.0: USB hub found
[ 2.593420] hub 9-0:1.0: 2 ports detected
[ 2.601848] alg: No test for crc32 (crc32-pclmul)
[ 2.602448] sound hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 2.602988] sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.602992] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.602995] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.602997] sound hdaudioC0D0: mono: mono_out=0x0
[ 2.602999] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 2.603001] sound hdaudioC0D0: inputs:
[ 2.603005] sound hdaudioC0D0: Front Mic=0x19
[ 2.603009] sound hdaudioC0D0: Rear Mic=0x18
[ 2.603011] sound hdaudioC0D0: Line=0x1a
[ 2.612435] kvm: Nested Virtualization enabled
[ 2.612442] kvm: Nested Paging enabled
[ 2.617273] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input7
[ 2.623200] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 2.623381] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 2.623505] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 2.623787] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 2.623900] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 2.624037] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 2.624578] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 2.643927] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.643931] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.643933] usb usb8: Product: OHCI PCI host controller
[ 2.643934] usb usb8: Manufacturer: Linux 3.16.0-rc6+ ohci_hcd
[ 2.643936] usb usb8: SerialNumber: 0000:00:12.0
[ 2.644355] hub 8-0:1.0: USB hub found
[ 2.644374] hub 8-0:1.0: 5 ports detected
[ 2.645188] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.645203] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 2.645261] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb09000
[ 2.694199] [drm] ring test on 6 succeeded in 19 usecs
[ 2.694210] [drm] ring test on 7 succeeded in 2 usecs
[ 2.694212] [drm] VCE initialized successfully.
[ 2.698142] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.702449] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.702452] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.702454] usb usb10: Product: OHCI PCI host controller
[ 2.702456] usb usb10: Manufacturer: Linux 3.16.0-rc6+ ohci_hcd
[ 2.702458] usb usb10: SerialNumber: 0000:00:13.0
[ 2.702731] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.702887] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.703063] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.703247] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.706323] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.719370] hub 10-0:1.0: USB hub found
[ 2.719949] hub 10-0:1.0: 5 ports detected
[ 2.726494] [drm] ib test on ring 5 succeeded
[ 2.747564] [drm] ib test on ring 6 succeeded
[ 2.748318] [drm] ib test on ring 7 succeeded
[ 2.798435] [drm] Radeon Display Connectors
[ 2.798439] [drm] Connector 0:
[ 2.798441] [drm] DP-1
[ 2.798443] [drm] HPD2
[ 2.798446] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.798447] [drm] Encoders:
[ 2.798449] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.798451] [drm] Connector 1:
[ 2.798452] [drm] HDMI-A-1
[ 2.798454] [drm] HPD3
[ 2.798456] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.798457] [drm] Encoders:
[ 2.798459] [drm] DFP2: INTERNAL_UNIPHY2
[ 2.798460] [drm] Connector 2:
[ 2.798462] [drm] DVI-D-1
[ 2.798463] [drm] HPD1
[ 2.798465] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 2.798466] [drm] Encoders:
[ 2.798468] [drm] DFP3: INTERNAL_UNIPHY1
[ 2.798469] [drm] Connector 3:
[ 2.798471] [drm] DVI-I-1
[ 2.798472] [drm] HPD6
[ 2.798474] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 2.798475] [drm] Encoders:
[ 2.798477] [drm] DFP4: INTERNAL_UNIPHY
[ 2.798479] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.798850] Adding 7999484k swap on /dev/mapper/VG--Debian-LV--swap. Priority:-1 extents:1 across:7999484k SSFS
[ 2.826216] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[ 2.851971] [drm] fb mappable at 0xE098E000
[ 2.851975] [drm] vram apper at 0xE0000000
[ 2.851977] [drm] size 8294400
[ 2.851978] [drm] fb depth is 24
[ 2.851980] [drm] pitch is 7680
[ 2.852915] fbcon: radeondrmfb (fb0) is primary device
[ 2.876516] Console: switching to colour frame buffer device 240x67
[ 2.885387] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.885392] radeon 0000:01:00.0: registered panic notifier
[ 2.895331] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
[ 2.895590] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.895829] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.896061] snd_hda_intel 0000:01:00.1: irq 91 for MSI/MSI-X
[ 2.949781] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input15
[ 2.950515] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input16
[ 2.951056] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input17
[ 2.951475] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input18
[ 2.951892] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input19
[ 2.952337] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input20
[ 2.988652] usb 5-1: New USB device found, idVendor=045e, idProduct=0752
[ 2.988657] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.988660] usb 5-1: Product: Wired Keyboard 400
[ 2.988662] usb 5-1: Manufacturer: Microsoft
[ 2.989797] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.019910] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.035148] usbcore: registered new interface driver usbhid
[ 3.035152] usbhid: USB HID core driver
[ 3.038597] input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.0/0003:045E:0752.0001/input/input21
[ 3.038907] Switched to clocksource tsc
[ 3.040287] hid-generic 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:10.1-1/input0
[ 3.162907] usb 7-2: new low-speed USB device number 2 using xhci_hcd
[ 3.438907] usb 7-2: New USB device found, idVendor=192f, idProduct=0416
[ 3.438915] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.438920] usb 7-2: Product: USB Optical Mouse
[ 3.439335] usb 7-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.444337] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.1/0000:04:00.0/usb7/7-2/7-2:1.0/0003:192F:0416.0002/input/input22
[ 3.445357] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:04:00.0-2/input0
[ 3.824436] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 4.098927] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 4.114831] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 4.320549] RPC: Registered named UNIX socket transport module.
[ 4.320553] RPC: Registered udp transport module.
[ 4.320554] RPC: Registered tcp transport module.
[ 4.320556] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.324118] FS-Cache: Loaded
[ 4.331387] FS-Cache: Netfs 'nfs' registered for caching
[ 4.340813] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.651452] Bluetooth: Core ver 2.19
[ 4.651498] NET: Registered protocol family 31
[ 4.651500] Bluetooth: HCI device and connection manager initialized
[ 4.651565] Bluetooth: HCI socket layer initialized
[ 4.651572] Bluetooth: L2CAP socket layer initialized
[ 4.651597] Bluetooth: SCO socket layer initialized
[ 4.663484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.663488] Bluetooth: BNEP filters: protocol multicast
[ 4.663499] Bluetooth: BNEP socket layer initialized
[ 4.686224] r8169 0000:05:00.0 eth0: link down
[ 4.686305] r8169 0000:05:00.0 eth0: link down
[ 4.686462] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.471432] r8169 0000:05:00.0 eth0: link up
[ 7.471453] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
next prev parent reply other threads:[~2014-07-23 8:05 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <53C77BB8.6030804@daenzer.net>
2014-07-17 7:58 ` Random panic in load_balance() with 3.16-rc Peter Zijlstra
2014-07-18 9:29 ` Michel Dänzer
2014-07-22 6:13 ` Michel Dänzer
2014-07-23 3:53 ` Michel Dänzer
2014-07-23 4:21 ` Linus Torvalds
2014-07-23 6:49 ` Peter Zijlstra
2014-07-23 8:05 ` Michel Dänzer [this message]
2014-07-23 8:28 ` Peter Zijlstra
2014-07-23 9:25 ` Peter Zijlstra
2014-07-23 9:31 ` Michel Dänzer
2014-07-23 9:45 ` Dietmar Eggemann
2014-07-23 11:11 ` Peter Zijlstra
2014-07-23 11:30 ` Peter Zijlstra
2014-07-23 14:24 ` Peter Zijlstra
2014-07-23 14:38 ` Michel Dänzer
2014-07-23 15:51 ` Linus Torvalds
[not found] ` <20140723155526.GW3935@laptop>
2014-07-23 16:54 ` Linus Torvalds
2014-07-23 17:03 ` Peter Zijlstra
2014-07-23 17:12 ` Linus Torvalds
2014-07-23 17:26 ` Linus Torvalds
2014-07-23 18:25 ` Peter Zijlstra
2014-07-23 18:35 ` Linus Torvalds
2014-07-23 18:41 ` Peter Zijlstra
2014-07-23 18:55 ` Linus Torvalds
2014-07-23 19:02 ` Peter Zijlstra
2014-07-23 19:20 ` Linus Torvalds
2014-07-24 1:43 ` Michel Dänzer
2014-07-24 18:47 ` Linus Torvalds
2014-07-24 18:59 ` Peter Zijlstra
2014-07-25 1:25 ` Michel Dänzer
2014-07-25 2:33 ` Linus Torvalds
2014-07-25 2:50 ` Nick Krause
2014-07-25 2:36 ` Nick Krause
2014-07-25 3:55 ` Alexei Starovoitov
2014-07-25 4:00 ` Nick Krause
2014-07-25 14:02 ` Steven Rostedt
2014-07-25 18:29 ` Linus Torvalds
2014-07-25 19:10 ` Steven Rostedt
2014-07-25 20:01 ` Linus Torvalds
2014-07-25 20:13 ` Steven Rostedt
2014-07-25 21:25 ` Jakub Jelinek
2014-07-26 18:28 ` Linus Torvalds
2014-07-26 18:39 ` Linus Torvalds
2014-07-26 19:35 ` Markus Trippelsdorf
2014-07-26 19:55 ` Theodore Ts'o
2014-07-26 20:20 ` Markus Trippelsdorf
2014-07-26 22:08 ` Jakub Jelinek
2014-07-26 19:56 ` Linus Torvalds
2014-07-26 20:03 ` Linus Torvalds
2014-07-26 20:19 ` Markus Trippelsdorf
2014-07-26 20:39 ` Linus Torvalds
2014-07-28 12:26 ` Frank Ch. Eigler
2014-07-28 13:10 ` Theodore Ts'o
2014-07-28 14:11 ` Frank Ch. Eigler
2014-07-28 16:45 ` Linus Torvalds
2014-07-28 17:27 ` Alexei Starovoitov
2014-07-28 18:09 ` Markus Trippelsdorf
2014-07-28 18:28 ` Linus Torvalds
2014-07-28 18:41 ` Markus Trippelsdorf
2014-07-29 8:58 ` Jakub Jelinek
2014-07-28 19:50 ` Theodore Ts'o
2014-07-28 3:47 ` Michel Dänzer
2014-07-28 16:48 ` Linus Torvalds
2014-07-29 2:29 ` Michel Dänzer
2014-08-05 3:19 ` Steven Rostedt
2014-07-26 18:02 ` Steven Chamberlain
2014-07-29 9:20 ` Michel Dänzer
2014-07-25 6:48 ` Jakub Jelinek
2014-07-25 8:15 ` Linus Torvalds
2014-07-25 9:03 ` Michel Dänzer
2014-07-25 9:21 ` Markus Trippelsdorf
2014-07-25 9:42 ` Markus Trippelsdorf
2014-07-23 18:07 ` Linus Torvalds
2014-07-23 18:31 ` Peter Zijlstra
2014-07-23 18:24 ` Peter Zijlstra
2014-07-23 17:04 ` Peter Zijlstra
2014-07-23 17:15 ` Linus Torvalds
2014-07-23 18:25 ` Peter Zijlstra
2014-07-23 18:23 ` Peter Zijlstra
2014-07-23 10:52 ` Peter Zijlstra
2014-07-24 7:18 ` Michel Dänzer
2014-07-24 7:51 ` Peter Zijlstra
2014-07-24 9:55 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53CF6CC4.6090207@daenzer.net \
--to=michel@daenzer.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.