From: Alex Elder <elder@ieee.org>
To: Ilya Dryomov <ilya.dryomov@inktank.com>, ceph-devel@vger.kernel.org
Subject: Re: [PATCH 2/8] rbd: introduce rbd_dev_header_info()
Date: Thu, 24 Jul 2014 07:34:43 -0500 [thread overview]
Message-ID: <53D0FD63.8030905@ieee.org> (raw)
In-Reply-To: <1406191369-6746-3-git-send-email-ilya.dryomov@inktank.com>
On 07/24/2014 03:42 AM, Ilya Dryomov wrote:
> A wrapper around rbd_dev_v{1,2}_header_info() to reduce duplication.
Looks good.
Reviewed-by: Alex Elder <elder@linaro.org>
> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
> ---
> drivers/block/rbd.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
> index 7847fbb949ff..0d3be608f16f 100644
> --- a/drivers/block/rbd.c
> +++ b/drivers/block/rbd.c
> @@ -514,7 +514,7 @@ static void rbd_dev_remove_parent(struct rbd_device *rbd_dev);
>
> static int rbd_dev_refresh(struct rbd_device *rbd_dev);
> static int rbd_dev_v2_header_onetime(struct rbd_device *rbd_dev);
> -static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev);
> +static int rbd_dev_header_info(struct rbd_device *rbd_dev);
> static const char *rbd_dev_v2_snap_name(struct rbd_device *rbd_dev,
> u64 snap_id);
> static int _rbd_dev_v2_snap_size(struct rbd_device *rbd_dev, u64 snap_id,
> @@ -3506,13 +3506,10 @@ static int rbd_dev_refresh(struct rbd_device *rbd_dev)
> u64 mapping_size;
> int ret;
>
> - rbd_assert(rbd_image_format_valid(rbd_dev->image_format));
> down_write(&rbd_dev->header_rwsem);
> mapping_size = rbd_dev->mapping.size;
> - if (rbd_dev->image_format == 1)
> - ret = rbd_dev_v1_header_info(rbd_dev);
> - else
> - ret = rbd_dev_v2_header_info(rbd_dev);
> +
> + ret = rbd_dev_header_info(rbd_dev);
>
> /* If it's a mapped snapshot, validate its EXISTS flag */
>
> @@ -4501,6 +4498,16 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev)
> return ret;
> }
>
> +static int rbd_dev_header_info(struct rbd_device *rbd_dev)
> +{
> + rbd_assert(rbd_image_format_valid(rbd_dev->image_format));
> +
> + if (rbd_dev->image_format == 1)
> + return rbd_dev_v1_header_info(rbd_dev);
> +
> + return rbd_dev_v2_header_info(rbd_dev);
> +}
> +
> static int rbd_bus_add_dev(struct rbd_device *rbd_dev)
> {
> struct device *dev;
> @@ -5149,10 +5156,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, bool mapping)
> goto out_header_name;
> }
>
> - if (rbd_dev->image_format == 1)
> - ret = rbd_dev_v1_header_info(rbd_dev);
> - else
> - ret = rbd_dev_v2_header_info(rbd_dev);
> + ret = rbd_dev_header_info(rbd_dev);
> if (ret)
> goto err_out_watch;
>
>
next prev parent reply other threads:[~2014-07-24 12:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 8:42 [PATCH 0/8] wip-overlap Ilya Dryomov
2014-07-24 8:42 ` [PATCH 1/8] rbd: show the entire chain of parent images Ilya Dryomov
2014-07-24 12:31 ` Alex Elder
2014-07-24 12:45 ` Ilya Dryomov
2014-07-24 8:42 ` [PATCH 2/8] rbd: introduce rbd_dev_header_info() Ilya Dryomov
2014-07-24 12:34 ` Alex Elder [this message]
2014-07-24 8:42 ` [PATCH 3/8] rbd: remove unnecessary asserts in rbd_dev_image_probe() Ilya Dryomov
2014-07-24 12:40 ` Alex Elder
2014-07-24 8:42 ` [PATCH 4/8] rbd: split rbd_dev_spec_update() into two functions Ilya Dryomov
2014-07-24 12:55 ` Alex Elder
2014-07-24 8:42 ` [PATCH 5/8] rbd: harden rbd_dev_refresh() caller Ilya Dryomov
2014-07-24 13:09 ` Alex Elder
2014-07-24 8:42 ` [PATCH 6/8] rbd: update mapping size only on refresh Ilya Dryomov
2014-07-24 13:25 ` Alex Elder
2014-07-24 13:46 ` Ilya Dryomov
2014-07-24 15:10 ` Ilya Dryomov
2014-07-25 13:31 ` Alex Elder
2014-07-24 17:59 ` Alex Elder
2014-07-24 8:42 ` [PATCH 7/8] rbd: do not read in parent info before snap context Ilya Dryomov
2014-07-25 8:14 ` Alex Elder
2014-07-25 8:36 ` Ilya Dryomov
2014-07-25 12:46 ` Alex Elder
2014-07-24 8:42 ` [PATCH 8/8] rbd: take snap_id into account when reading in parent info Ilya Dryomov
2014-07-24 18:43 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53D0FD63.8030905@ieee.org \
--to=elder@ieee.org \
--cc=ceph-devel@vger.kernel.org \
--cc=ilya.dryomov@inktank.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.