From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx1.redhat.com (ext-mx12.extmail.prod.ext.phx2.redhat.com [10.5.110.17]) by int-mx14.intmail.prod.int.phx2.redhat.com (8.14.4/8.14.4) with ESMTP id s6V7UJ2n001093 for ; Thu, 31 Jul 2014 03:30:19 -0400 Received: from michael.mail.tiscali.it (michael.mail.tiscali.it [213.205.33.246]) by mx1.redhat.com (8.14.4/8.14.4) with ESMTP id s6V7UGVr023621 for ; Thu, 31 Jul 2014 03:30:17 -0400 Message-ID: <53D9F08A.5050503@assyoma.it> Date: Thu, 31 Jul 2014 09:30:18 +0200 From: Gionatan Danti MIME-Version: 1.0 References: <53B41EA2.3010203@assyoma.it> In-Reply-To: <53B41EA2.3010203@assyoma.it> Content-Transfer-Encoding: 7bit Subject: Re: [linux-lvm] LVM and I/O block size (max_sectors_kb) Reply-To: LVM general discussion and development List-Id: LVM general discussion and development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-lvm@redhat.com Cc: g.danti@assyoma.it On 02/07/2014 17:00, Gionatan Danti wrote: > Hi all, > it seems that, when using LVM, I/O block transfer size has an hard limit > at about 512 KB/iop. Large I/O transfers can be crucial for performance, > so I am trying to understand if I can change that. > > Some info: uname -a (CentOS 6.5 x86_64) > Linux blackhole.assyoma.it 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 > 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux > > From my understanding, maximum I/O block size for physical device can > be tuned from /sys/block/sdX/queue/max_sectors_kb. > > Some quick iostat -k -x 1 show that, for physical device, the tunable > works: > > # max_sectors_kb=512 (default) > dd if=/dev/zero of=/dev/sdd1 bs=2M count=16 oflag=direct > iostat -x -k 1 /dev/sdd: avgrq-sz=1024 (1024 sectors = 512KB = > max_sectors_kb) > > # max_sectors_kb=2048 > dd if=/dev/zero of=/dev/sdd1 bs=2M count=16 oflag=direct > iostat -x -k 1 /dev/sdd: avgrq-sz=2048 (2048 sectors = 1024 KB) > > dd if=/dev/zero of=/dev/sdd1 bs=4M count=16 oflag=direct > iostat -x -k 1 /dev/sdd: avgrq-sz=2730.67 (2730 sectors = ~1350 KB) > > As you can see, I can't always reach 100% efficienty but I came > reasonably close. > > > The problem is that, when using LVM2 (on software raid10), I can not > really increase I/O transfer size. Setting both sd*, md* and dm-* to > max_sectors_kb=2048 leads to _no_ increase in I/O blocks, while > decreasing the max_sectors_kb works properly: > > # max_sectors_kb=2048 > dd if=/dev/zero of=/dev/vg_kvm/TEST bs=2M count=64 oflag=direct > iostat -x -k 1 /dev/vg_kvm/TEST: avgrq-sz=1024.00 (it remains as 512KB) > > # max_sectors_kb=256 > dd if=/dev/zero of=/dev/vg_kvm/TEST bs=2M count=64 oflag=direct > iostat -x -k 1 /dev/vg_kvm/TEST: avgrq-sz=512.00 (512 sectors = 256KB = > max_sectors_kb) > > Now, two questions: > 1) why I see this hard limit? > 2) can I change this behavior? > > Thank you very much. > Anyone with some ideas? :) -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.danti@assyoma.it - info@assyoma.it GPG public key ID: FF5F32A8