From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pannirselvam Kanagaratnam Date: Sun, 03 Aug 2014 07:05:50 +0800 Subject: [ath9k-devel] Enabling 4.9 GHz In-Reply-To: References: <53DB568C.1070505@xsmail.com> Message-ID: <53DD6ECE.5030108@xsmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Thanks Adrian. 2 & 3 are done. Will look into regdb. Regards, Pannir On 03/08/2014 6:18 AM, Adrian Chadd wrote: > hi! > > I think you'll have to hack up a custom regulatory domain database > that includes the frequencies your device is licenced to work on. > > The things that need to happen: > > * regdb support, or the driver/802.11 layer won't let you do anything; > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the > OTP EEPROM set, or the NIC may not let you; > * then make sure the AR9590 has calibration data for the 4.9GHz > channel(s), or things won't work very well. > > > -a > > > On 1 August 2014 01:57, Pannirselvam Kanagaratnam wrote: >> Hello, >> >> I would like to know how to enable 4.9 GHz on ath9k. The module I am >> using is based on AR9590. >> >> Regards, >> >> Pannir >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel