Re: [PATCH v4] iio: adc: Add TI ADC128S052

[Hartmut Knaack <knaack.h@gmx.de>]

Angelo Compagnucci schrieb:
> This patch adds support for ADC128S052 from TI.
>
> Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
> ---
Sorry, one more issue in adc128_read_raw() which I should have spotted already reviewing your V2.
>
> * Fixed spi_set_drvdata(spi, indio_dev); in adc128_probe.
>
>  drivers/iio/adc/Kconfig         |  10 +++
>  drivers/iio/adc/Makefile        |   1 +
>  drivers/iio/adc/ti-adc128s052.c | 179 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 190 insertions(+)
>  create mode 100644 drivers/iio/adc/ti-adc128s052.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 11b048a..3ea56a3 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -216,6 +216,16 @@ config TI_ADC081C
>  	  This driver can also be built as a module. If so, the module will be
>  	  called ti-adc081c.
>  
> +config TI_ADC128S052
> +	tristate "Texas Instruments ADC128S052"
> +	depends on SPI
> +	help
> +	  If you say yes here you get support for Texas Instruments ADC128S052
> +	  chip.
> +
> +	  This driver can also be built as a module. If so, the module will be
> +	  called ti-adc128s052.
> +
>  config TI_AM335X_ADC
>  	tristate "TI's AM335X ADC driver"
>  	depends on MFD_TI_AM335X_TSCADC
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index ad81b51..9cc37f6 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_MCP3422) += mcp3422.o
>  obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>  obj-$(CONFIG_NAU7802) += nau7802.o
>  obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> +obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
>  obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
>  obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
>  obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
> diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
> new file mode 100644
> index 0000000..56b78b0
> --- /dev/null
> +++ b/drivers/iio/adc/ti-adc128s052.c
> @@ -0,0 +1,179 @@
> +/*
> + * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
> + *
> + * Driver for Texas Instruments' ADC128S052 ADC chip.
> + * Datasheet can be found here:
> + * http://www.ti.com/lit/ds/symlink/adc128s052.pdf
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/spi/spi.h>
> +#include <linux/module.h>
> +#include <linux/iio/iio.h>
> +#include <linux/regulator/consumer.h>
> +
> +struct adc128 {
> +	struct spi_device *spi;
> +
> +	struct regulator *reg;
> +	struct mutex lock;
> +
> +	u8 buffer[2] ____cacheline_aligned;
> +};
> +
> +static int adc128_adc_conversion(struct adc128 *adc, u8 channel)
> +{
> +	int ret;
> +
> +	mutex_lock(&adc->lock);
> +
> +	adc->buffer[0] = channel << 3;
> +	adc->buffer[1] = 0;
> +
> +	ret = spi_write(adc->spi, &adc->buffer, 2);
> +	if (ret < 0) {
> +		mutex_unlock(&adc->lock);
> +		return ret;
> +	}
> +
> +	ret = spi_read(adc->spi, &adc->buffer, 2);
> +
> +	mutex_unlock(&adc->lock);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	return ((adc->buffer[0] << 8 | adc->buffer[1]) & 0xFFF);
> +}
> +
> +static int adc128_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *channel, int *val,
> +			   int *val2, long mask)
> +{
> +	struct adc128 *adc = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +
> +		ret = adc128_adc_conversion(adc, channel->channel);
> +		if (ret < 0)
> +			return -EINVAL;
return ret; to pass the error code up.
> +
> +		*val = ret;
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +
> +		ret = regulator_get_voltage(adc->reg);
> +		if (ret < 0)
> +			return -EINVAL;
Same here: return ret;
> +
> +		*val = ret / 1000;
> +		*val2 = 12;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +}
> +
> +#define ADC128_VOLTAGE_CHANNEL(num)	\
> +	{ \
> +		.type = IIO_VOLTAGE, \
> +		.indexed = 1, \
> +		.channel = (num), \
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
> +	}
> +
> +static const struct iio_chan_spec adc128_channels[] = {
> +	ADC128_VOLTAGE_CHANNEL(0),
> +	ADC128_VOLTAGE_CHANNEL(1),
> +	ADC128_VOLTAGE_CHANNEL(2),
> +	ADC128_VOLTAGE_CHANNEL(3),
> +	ADC128_VOLTAGE_CHANNEL(4),
> +	ADC128_VOLTAGE_CHANNEL(5),
> +	ADC128_VOLTAGE_CHANNEL(6),
> +	ADC128_VOLTAGE_CHANNEL(7),
> +};
> +
> +static const struct iio_info adc128_info = {
> +	.read_raw = adc128_read_raw,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +static int adc128_probe(struct spi_device *spi)
> +{
> +	struct iio_dev *indio_dev;
> +	struct adc128 *adc;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	adc = iio_priv(indio_dev);
> +	adc->spi = spi;
> +
> +	spi_set_drvdata(spi, indio_dev);
> +
> +	indio_dev->dev.parent = &spi->dev;
> +	indio_dev->name = spi_get_device_id(spi)->name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &adc128_info;
> +
> +	indio_dev->channels = adc128_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(adc128_channels);
> +
> +	adc->reg = devm_regulator_get(&spi->dev, "vref");
> +	if (IS_ERR(adc->reg))
> +		return PTR_ERR(adc->reg);
> +
> +	ret = regulator_enable(adc->reg);
> +	if (ret < 0)
> +		return ret;
> +
> +	mutex_init(&adc->lock);
> +
> +	ret = iio_device_register(indio_dev);
> +
> +	return ret;
> +}
> +
> +static int adc128_remove(struct spi_device *spi)
> +{
> +	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> +	struct adc128 *adc = iio_priv(indio_dev);
> +
> +	iio_device_unregister(indio_dev);
> +	regulator_disable(adc->reg);
> +
> +	return 0;
> +}
> +
> +static const struct spi_device_id adc128_id[] = {
> +	{ "adc128s052", 0},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, adc128_id);
> +
> +static struct spi_driver adc128_driver = {
> +	.driver = {
> +		.name = "adc128s052",
> +		.owner = THIS_MODULE,
> +	},
> +	.probe = adc128_probe,
> +	.remove = adc128_remove,
> +	.id_table = adc128_id,
> +};
> +module_spi_driver(adc128_driver);
> +
> +MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
> +MODULE_DESCRIPTION("Texas Instruments ADC128S052");
> +MODULE_LICENSE("GPL v2");