From: Paolo Bonzini <pbonzini@redhat.com>
To: Wanpeng Li <wanpeng.li@linux.intel.com>,
Jan Kiszka <jan.kiszka@siemens.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>,
Gleb Natapov <gleb@kernel.org>, Bandan Das <bsd@redhat.com>,
Zhang Yang <yang.z.zhang@intel.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] KVM: nVMX: nested TPR shadow/threshold emulation
Date: Mon, 04 Aug 2014 14:53:23 +0200 [thread overview]
Message-ID: <53DF8243.4070706@redhat.com> (raw)
In-Reply-To: <1407149907-13483-1-git-send-email-wanpeng.li@linux.intel.com>
Il 04/08/2014 12:58, Wanpeng Li ha scritto:
> This patch fix bug https://bugzilla.kernel.org/show_bug.cgi?id=61411
>
> TPR shadow/threshold feature is important to speed up the Windows guest.
> Besides, it is a must feature for certain VMM.
>
> We map virtual APIC page address and TPR threshold from L1 VMCS. If
> TPR_BELOW_THRESHOLD VM exit is triggered by L2 guest and L1 interested
> in, we inject it into L1 VMM for handling.
>
> Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
> ---
> v2 -> v3:
> * nested vm entry failure if both tpr shadow and cr8 exiting bits are not set
> v1 -> v2:
> * don't take L0's "virtualize APIC accesses" setting into account
> * virtual_apic_page do exactly the same thing that is done for apic_access_page
> * add the tpr threshold field to the read-write fields for shadow VMCS
>
> arch/x86/kvm/vmx.c | 38 ++++++++++++++++++++++++++++++++++++--
> 1 file changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index c604f3c..7a56e2c 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -379,6 +379,7 @@ struct nested_vmx {
> * we must keep them pinned while L2 runs.
> */
> struct page *apic_access_page;
> + struct page *virtual_apic_page;
> u64 msr_ia32_feature_control;
>
> struct hrtimer preemption_timer;
> @@ -533,6 +534,7 @@ static int max_shadow_read_only_fields =
> ARRAY_SIZE(shadow_read_only_fields);
>
> static unsigned long shadow_read_write_fields[] = {
> + TPR_THRESHOLD,
> GUEST_RIP,
> GUEST_RSP,
> GUEST_CR0,
> @@ -2330,7 +2332,7 @@ static __init void nested_vmx_setup_ctls_msrs(void)
> CPU_BASED_MOV_DR_EXITING | CPU_BASED_UNCOND_IO_EXITING |
> CPU_BASED_USE_IO_BITMAPS | CPU_BASED_MONITOR_EXITING |
> CPU_BASED_RDPMC_EXITING | CPU_BASED_RDTSC_EXITING |
> - CPU_BASED_PAUSE_EXITING |
> + CPU_BASED_PAUSE_EXITING | CPU_BASED_TPR_SHADOW |
> CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
> /*
> * We can allow some features even when not supported by the
> @@ -6148,6 +6150,10 @@ static void free_nested(struct vcpu_vmx *vmx)
> nested_release_page(vmx->nested.apic_access_page);
> vmx->nested.apic_access_page = 0;
> }
> + if (vmx->nested.virtual_apic_page) {
> + nested_release_page(vmx->nested.virtual_apic_page);
> + vmx->nested.virtual_apic_page = 0;
> + }
>
> nested_free_all_saved_vmcss(vmx);
> }
> @@ -6936,7 +6942,7 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
> case EXIT_REASON_MCE_DURING_VMENTRY:
> return 0;
> case EXIT_REASON_TPR_BELOW_THRESHOLD:
> - return 1;
> + return nested_cpu_has(vmcs12, CPU_BASED_TPR_SHADOW);
> case EXIT_REASON_APIC_ACCESS:
> return nested_cpu_has2(vmcs12,
> SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
> @@ -7057,6 +7063,9 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
>
> static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
> {
> + if (is_guest_mode(vcpu))
> + return;
> +
> if (irr == -1 || tpr < irr) {
> vmcs_write32(TPR_THRESHOLD, 0);
> return;
> @@ -8024,6 +8033,27 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
> exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
> exec_control &= ~CPU_BASED_TPR_SHADOW;
> exec_control |= vmcs12->cpu_based_vm_exec_control;
> +
> + if (exec_control & CPU_BASED_TPR_SHADOW) {
> + if (vmx->nested.virtual_apic_page)
> + nested_release_page(vmx->nested.virtual_apic_page);
> + vmx->nested.virtual_apic_page =
> + nested_get_page(vcpu, vmcs12->virtual_apic_page_addr);
> + if (!vmx->nested.virtual_apic_page)
> + exec_control &=
> + ~CPU_BASED_TPR_SHADOW;
> + else
> + vmcs_write64(VIRTUAL_APIC_PAGE_ADDR,
> + page_to_phys(vmx->nested.virtual_apic_page));
> +
> + if (!(exec_control & CPU_BASED_TPR_SHADOW) &&
> + !((exec_control & CPU_BASED_CR8_LOAD_EXITING) &&
> + (exec_control & CPU_BASED_CR8_STORE_EXITING)))
> + nested_vmx_failValid(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
> +
> + vmcs_write32(TPR_THRESHOLD, vmcs12->tpr_threshold);
> + }
> +
> /*
> * Merging of IO and MSR bitmaps not currently supported.
> * Rather, exit every time.
> @@ -8802,6 +8832,10 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
> nested_release_page(vmx->nested.apic_access_page);
> vmx->nested.apic_access_page = 0;
> }
> + if (vmx->nested.virtual_apic_page) {
> + nested_release_page(vmx->nested.virtual_apic_page);
> + vmx->nested.virtual_apic_page = 0;
> + }
>
> /*
> * Exiting from L2 to L1, we're now back to L1 which thinks it just
>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
I will apply this for 3.18. Thanks,
Paolo
next prev parent reply other threads:[~2014-08-04 12:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 10:58 [PATCH v3] KVM: nVMX: nested TPR shadow/threshold emulation Wanpeng Li
2014-08-04 12:53 ` Paolo Bonzini [this message]
2014-08-05 7:56 ` Zhang, Yang Z
2014-08-05 11:00 ` Paolo Bonzini
2014-08-06 6:38 ` Zhang, Yang Z
2014-08-07 6:26 ` Wanpeng Li
2014-08-07 14:05 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DF8243.4070706@redhat.com \
--to=pbonzini@redhat.com \
--cc=bsd@redhat.com \
--cc=gleb@kernel.org \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=wanpeng.li@linux.intel.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.