From: "Dr. Markus Eich" <markus.eich@dfki.de>
To: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: Building yocto for Odroid XU. No login after boot.
Date: Wed, 06 Aug 2014 18:13:39 +0200 [thread overview]
Message-ID: <53E25433.5020003@dfki.de> (raw)
Dear all,
I am trying to build an image for the Odroid XU, featuring the Samsung
Octa 5 CPU
I managed to build everything needed (modules, kernel, u-boot, etc.)
The recipes can be found at: https://github.com/MarkusEich/meta-odroid.
The last problem (hopefully last :-) I have is that I cannot log in
after the kernel is loaded via UART console
Maybe init.d or systemd is not setup properly?
I am using the console-image-minimal.bb from meta.
Here is the last console output. It seems that the kernel is loaded
(including modules) and the rootfs is properly mounted. There is no
error, there is simply no login or shell.
Any ideas why I cannot login? Its a bit poking in the dark ATM.
Cheers,
Markus
==
[ 5.722795] CPUFREQ of CA7 L5 : 962500 uV
[ 5.726871] CPUFREQ of CA7 L6 : 950000 uV
[ 5.730947] CPUFREQ of CA7 L7 : 950000 uV
[ 5.735025] CPUFREQ of CA7 L8 : 950000 uV
[ 5.739095] CPUFREQ of CA7 L9 : 950000 uV
[ 5.743146] CPUFREQ of CA7 L10 : 950000 uV
[ 5.747336] CPUFREQ of CA7 L11 : 950000 uV
[ 5.751583] CPUFREQ of CA15 L0 : 1362500 uV
[ 5.755663] CPUFREQ of CA15 L1 : 1362500 uV
[ 5.759826] CPUFREQ of CA15 L2 : 1225000 uV
[ 5.764012] CPUFREQ of CA15 L3 : 1175000 uV
[ 5.768129] CPUFREQ of CA15 L4 : 1137500 uV
[ 5.772313] CPUFREQ of CA15 L5 : 1112500 uV
[ 5.776474] CPUFREQ of CA15 L6 : 1075000 uV
[ 5.780638] CPUFREQ of CA15 L7 : 1037500 uV
[ 5.784800] CPUFREQ of CA15 L8 : 1000000 uV
[ 5.788962] CPUFREQ of CA15 L9 : 975000 uV
[ 5.793010] CPUFREQ of CA15 L10 : 937500 uV
[ 5.797201] CPUFREQ of CA15 L11 : 912500 uV
[ 5.801368] CPUFREQ of CA15 L12 : 900000 uV
[ 5.805526] CPUFREQ of CA15 L13 : 900000 uV
[ 5.809689] CPUFREQ of CA15 L14 : 900000 uV
[ 5.813822] CPUFREQ of CA15 L15 : 900000 uV
[ 5.818018] CPUFREQ of CA15 L16 : 900000 uV
[ 5.822173] CPUFREQ of CA15 L17 : 900000 uV
[ 5.826338] CPUFREQ of CA15 L18 : 900000 uV
[ 5.830583] fout_apll[900000000]
[ 5.836287] S divider change for DFS of MIF block
[ 5.984276] init_volt[975000], freq[800000]
[ 5.987809] ALSA device list:
[ 5.989956] #0: Odroid-max98090
[ 5.993533] Freeing init memory: 256K
[ 5.996898] Write protecting the kernel text section c0008000 - c09e2000
[ 6.003931] rodata_test: attempting to write to read-only section:
[ 6.009728] write to read-only section trapped, success
[ 6.055010] systemd-udevd[1299]: starting version 204
[ 6.350360] EXT4-fs (mmcblk0p2): recovery complete
[ 6.356827] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
INIT: version 2.88 booting
Starting udev
[ 6.880415] udevd[1376]: starting version 182
[ 7.075108] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
Starting Bootlog daemon: bootlogd.
[ 7.369381] max77802_rtc_read_time: 114/7/6 16:10:3(3)
INIT: Entering runlevel: 5
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
[ 7.431705] max77802_rtc_read_time: 114/7/6 16:10:4(3)
Starting syslogd/klogd: done
Stopping Bootlog daemon: bootlogd.
==
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
next reply other threads:[~2014-08-06 16:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-06 16:13 Dr. Markus Eich [this message]
2014-08-06 16:26 ` Building yocto for Odroid XU. No login after boot Gary Thomas
2014-08-07 6:24 ` Khem Raj
2014-08-07 12:51 ` Dr. Markus Eich
2014-08-07 13:05 ` Gary Thomas
2014-08-08 11:41 ` Dr. Markus Eich
2014-09-16 6:24 ` Ravikant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53E25433.5020003@dfki.de \
--to=markus.eich@dfki.de \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.