From: Arthur Marsh <arthur.marsh@internode.on.net>
To: linux-scsi@vger.kernel.org
Subject: Re: [PATCH] eata: remove driver_lock
Date: Sun, 10 Aug 2014 22:12:34 +0930 [thread overview]
Message-ID: <53E768BA.7000308@internode.on.net> (raw)
In-Reply-To: <1405326393-18559-1-git-send-email-hch@lst.de>
Christoph Hellwig wrote, on 14/07/14 17:56:
> port_detect is only called from the module_init routine and thus implicitly
> serialized, so remove the driver lock which was held over potentially
> sleeping function calls.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
> ---
> drivers/scsi/eata.c | 9 ---------
> 1 file changed, 9 deletions(-)
>
> diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
> index 03372cf..980898e 100644
> --- a/drivers/scsi/eata.c
> +++ b/drivers/scsi/eata.c
> @@ -837,7 +837,6 @@ struct hostdata {
> static struct Scsi_Host *sh[MAX_BOARDS];
> static const char *driver_name = "EATA";
> static char sha[MAX_BOARDS];
> -static DEFINE_SPINLOCK(driver_lock);
>
> /* Initialize num_boards so that ihdlr can work while detect is in progress */
> static unsigned int num_boards = MAX_BOARDS;
> @@ -1097,8 +1096,6 @@ static int port_detect(unsigned long port_base, unsigned int j,
> goto fail;
> }
>
> - spin_lock_irq(&driver_lock);
> -
> if (do_dma(port_base, 0, READ_CONFIG_PIO)) {
> #if defined(DEBUG_DETECT)
> printk("%s: detect, do_dma failed at 0x%03lx.\n", name,
> @@ -1265,10 +1262,7 @@ static int port_detect(unsigned long port_base, unsigned int j,
> }
> #endif
>
> - spin_unlock_irq(&driver_lock);
> sh[j] = shost = scsi_register(tpnt, sizeof(struct hostdata));
> - spin_lock_irq(&driver_lock);
> -
> if (shost == NULL) {
> printk("%s: unable to register host, detaching.\n", name);
> goto freedma;
> @@ -1345,8 +1339,6 @@ static int port_detect(unsigned long port_base, unsigned int j,
> else
> sprintf(dma_name, "DMA %u", dma_channel);
>
> - spin_unlock_irq(&driver_lock);
> -
> for (i = 0; i < shost->can_queue; i++)
> ha->cp[i].cp_dma_addr = pci_map_single(ha->pdev,
> &ha->cp[i],
> @@ -1439,7 +1431,6 @@ static int port_detect(unsigned long port_base, unsigned int j,
> freeirq:
> free_irq(irq, &sha[j]);
> freelock:
> - spin_unlock_irq(&driver_lock);
> release_region(port_base, REGION_SIZE);
> fail:
> return 0;
>
Not sure if this is related but it only appeared in the last few days in
Linus' git master:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0+ (root@am64) (gcc version 4.9.1
(Debian 4.9.1-5) ) #1141 SMP Sun Aug 10 20:50:33 ACST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fffbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fffc000-0x000000005fffefff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005ffff000-0x000000005fffffff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff]
reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/P4S800, BIOS ASUS
P4S800 ACPI BIOS Revision 1011 Beta 001 08/30/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5fffc max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new
0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01f50000, 0x01f50fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x5f19d000-0x5fff1fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x369a9000-0x377fd7ad]
[ 0.000000] Move RAMDISK from [mem 0x5f19d000-0x5fff17ad] to [mem
0x369a9000-0x377fd7ad]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F5710 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x5FFFC000 000030 (v01 ASUS P4S800
42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x5FFFC0C0 000074 (v01 ASUS P4S800
42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x5FFFC134 0025D4 (v01 ASUS P4S800
00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0x5FFFF000 000040
[ 0.000000] ACPI: BOOT 0x5FFFC030 000028 (v01 ASUS P4S800
42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 0x5FFFC058 000068 (v01 ASUS P4S800
42302E31 MSFT 31313031)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01f51000, 0x01f51fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x5fffbfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5fffbfff]
[ 0.000000] On node 0 totalpages: 393114
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1296 pages used for memmap
[ 0.000000] HighMem zone: 165886 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 128, address 0xfec00000,
GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f5d12000 s35840 r0 d21504
u57344
[ 0.000000] pcpu-alloc: s35840 r0 d21504 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 391338
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0
root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005fffc)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1528328K/1572456K available (4409K kernel code,
512K rwdata, 1976K rodata, 488K init, 8224K bss, 44128K reserved,
663544K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc16bf000 - 0xc1739000 ( 488 kB)
[ 0.000000] .data : 0xc144ea0d - 0xc16be000 (2493 kB)
[ 0.000000] .text : 0xc1000000 - 0xc144ea0d (4410 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] allocated 3145728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2999.897 MHz processor
[ 0.000066] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5999.79 BogoMIPS (lpj=11999588)
[ 0.000154] pid_max: default: 32768 minimum: 301
[ 0.000275] ACPI: Core revision 20140724
[ 0.004000] ACPI: All ACPI Tables successfully acquired
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor disabled by boot time parameter
[ 0.004000] Yama: becoming mindful.
[ 0.004000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] Initializing cgroup subsys blkio
[ 0.004000] Initializing cgroup subsys perf_event
[ 0.004000] Initializing cgroup subsys net_prio
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.004000] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[ 0.004000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.004000] Freeing SMP alternatives memory: 20K (c1739000 - c173e000)
[ 0.004000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.042423] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam:
0f, model: 03, stepping: 04)
[ 0.044000] Performance Events: Netburst events, Broken PMU hardware
detected, using software events only.
[ 0.044000] Failed to access perfctr msr (MSR 300 is fc29bd727e)
[ 0.044000] CPU 1 irqstacks, hard=f500e000 soft=f5010000
[ 0.044000] x86: Booting SMP configuration:
[ 0.044000] .... node #0, CPUs: #1
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.054124] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.056169] x86: Booted up 1 node, 2 CPUs
[ 0.056214] smpboot: Total of 2 processors activated (11999.58 BogoMIPS)
[ 0.057698] devtmpfs: initialized
[ 0.062342] PM: Registering ACPI NVS region [mem
0x5ffff000-0x5fffffff] (4096 bytes)
[ 0.062342] reboot: ASUS P4S800 series board detected. Selecting
BIOS-method for reboots.
[ 0.062342] pinctrl core: initialized pinctrl subsystem
[ 0.064126] NET: Registered protocol family 16
[ 0.064887] cpuidle: using governor ladder
[ 0.064934] cpuidle: using governor menu
[ 0.065102] ACPI: bus type PCI registered
[ 0.065147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.067171] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
[ 0.067216] PCI: Using configuration type 1 for base access
[ 0.080441] ACPI: Added _OSI(Module Device)
[ 0.080441] ACPI: Added _OSI(Processor Device)
[ 0.080441] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080441] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096440] ACPI: Interpreter enabled
[ 0.096520] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20140724/hwxface-580)
[ 0.096639] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S3_] (20140724/hwxface-580)
[ 0.096807] ACPI: (supports S0 S1 S4 S5)
[ 0.096850] ACPI: Using IOAPIC for interrupt routing
[ 0.097644] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.115163] acpi LNXCPU:00: Invalid PBLK length [5]
[ 0.115842] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.116524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.117185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.117844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.118502] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.119160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.119817] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.120488] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.121133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.121187] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments
MSI]
[ 0.121305] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.122201] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
(ignored)
[ 0.122207] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff]
(ignored)
[ 0.122212] acpi PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.122216] acpi PNP0A03:00: host bridge window [mem
0x000c8000-0x000dffff] (ignored)
[ 0.122220] acpi PNP0A03:00: host bridge window [mem
0x60000000-0xfebfffff] (ignored)
[ 0.122225] PCI: root bus 00: using default resources
[ 0.122266] acpi PNP0A03:00: fail to add MMCONFIG information, can't
access extended PCI configuration space under this bridge.
[ 0.123043] PCI host bridge to bus 0000:00
[ 0.123099] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.123144] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.123189] pci_bus 0000:00: root bus resource [mem
0x00000000-0xffffffff]
[ 0.123280] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
[ 0.123300] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff]
[ 0.123757] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.124068] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.124337] pci 0000:00:02.0: [1039:0963] type 00 class 0x060100
[ 0.124719] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.124799] pci 0000:00:02.1: reg 0x20: [io 0xe600-0xe61f]
[ 0.125085] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[ 0.125185] pci 0000:00:02.5: reg 0x20: [io 0xa400-0xa40f]
[ 0.125223] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]
[ 0.125269] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.125313] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]
[ 0.125358] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.125685] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.125711] pci 0000:00:03.0: reg 0x10: [mem 0xbe800000-0xbe800fff]
[ 0.125905] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.126168] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.126195] pci 0000:00:03.1: reg 0x10: [mem 0xbe000000-0xbe000fff]
[ 0.126387] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.126655] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.126686] pci 0000:00:03.3: reg 0x10: [mem 0xbd800000-0xbd800fff]
[ 0.126818] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.126965] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 0.127245] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[ 0.127277] pci 0000:00:04.0: reg 0x10: [io 0x8800-0x88ff]
[ 0.127296] pci 0000:00:04.0: reg 0x14: [mem 0xbd000000-0xbd000fff]
[ 0.127369] pci 0000:00:04.0: reg 0x30: [mem 0xdffe0000-0xdfffffff pref]
[ 0.127422] pci 0000:00:04.0: supports D1 D2
[ 0.127426] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127727] pci 0000:00:0a.0: [1102:0004] type 00 class 0x040100
[ 0.127759] pci 0000:00:0a.0: reg 0x10: [io 0x8400-0x843f]
[ 0.127891] pci 0000:00:0a.0: supports D1 D2
[ 0.128161] pci 0000:00:0a.1: [1102:7003] type 00 class 0x098000
[ 0.128191] pci 0000:00:0a.1: reg 0x10: [io 0x8000-0x8007]
[ 0.128323] pci 0000:00:0a.1: supports D1 D2
[ 0.128580] pci 0000:00:0a.2: [1102:4001] type 00 class 0x0c0010
[ 0.128613] pci 0000:00:0a.2: reg 0x10: [mem 0xbc800000-0xbc8007ff]
[ 0.128631] pci 0000:00:0a.2: reg 0x14: [mem 0xbc000000-0xbc003fff]
[ 0.128753] pci 0000:00:0a.2: supports D1 D2
[ 0.128757] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot
[ 0.129065] pci 0000:00:0b.0: [10ec:8169] type 00 class 0x020000
[ 0.129097] pci 0000:00:0b.0: reg 0x10: [io 0x7800-0x78ff]
[ 0.129116] pci 0000:00:0b.0: reg 0x14: [mem 0xbb800000-0xbb8000ff]
[ 0.129188] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.129240] pci 0000:00:0b.0: supports D1 D2
[ 0.129244] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot
[ 0.129526] pci 0000:00:0c.0: [1044:a400] type 00 class 0x010000
[ 0.129552] pci 0000:00:0c.0: reg 0x10: [io 0x7400-0x741f]
[ 0.129639] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
[ 0.130085] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[ 0.130118] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.130135] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.130151] pci 0000:01:00.0: reg 0x18: [mem 0xbf800000-0xbf80ffff]
[ 0.130203] pci 0000:01:00.0: reg 0x30: [mem 0xeffe0000-0xefffffff pref]
[ 0.130268] pci 0000:01:00.0: supports D1 D2
[ 0.130475] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[ 0.130499] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.130513] pci 0000:01:00.1: reg 0x14: [mem 0xbf000000-0xbf00ffff]
[ 0.130602] pci 0000:01:00.1: supports D1 D2
[ 0.130861] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.130911] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.130919] pci 0000:00:01.0: bridge window [mem 0xbf000000-0xbfffffff]
[ 0.130927] pci 0000:00:01.0: bridge window [mem
0xe0000000-0xfebfffff pref]
[ 0.130942] pci_bus 0000:00: on NUMA node 0
[ 0.134572] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134572] vgaarb: loaded
[ 0.134572] vgaarb: bridge control possible 0000:01:00.0
[ 0.134572] PCI: Using ACPI for IRQ routing
[ 0.134572] PCI: pci_cache_line_size set to 64 bytes
[ 0.134572] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.134572] e820: reserve RAM buffer [mem 0x5fffc000-0x5fffffff]
[ 0.136650] Switched to clocksource refined-jiffies
[ 0.156582] pnp: PnP ACPI init
[ 0.157211] system 00:00: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.157263] system 00:00: [mem 0x000f0000-0x000fffff] could not be
reserved
[ 0.157311] system 00:00: [mem 0x00100000-0x5fffffff] could not be
reserved
[ 0.157359] system 00:00: [mem 0xfec00000-0xfec000ff] could not be
reserved
[ 0.157406] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.157535] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.158293] system 00:01: [io 0xe400-0xe47f] has been reserved
[ 0.158341] system 00:01: [io 0xe480-0xe4ff] has been reserved
[ 0.158388] system 00:01: [io 0xe600-0xe61f] has been reserved
[ 0.158433] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.158480] system 00:01: [mem 0xffee0000-0xffefffff] has been reserved
[ 0.158530] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.158748] system 00:02: [mem 0xfffe0000-0xffffffff] could not be
reserved
[ 0.158801] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159042] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.159094] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159438] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.160830] pnp 00:05: [dma 3]
[ 0.160983] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.161848] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.162072] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.162400] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.163335] system 00:09: [io 0x0295-0x0296] has been reserved
[ 0.163388] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.163444] pnp: PnP ACPI: found 10 devices
[ 0.208987] Switched to clocksource acpi_pm
[ 0.209080] pci 0000:00:0b.0: BAR 6: assigned [mem
0x60000000-0x6001ffff pref]
[ 0.209137] pci 0000:00:0c.0: BAR 6: assigned [mem
0x60020000-0x60027fff pref]
[ 0.209192] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.209238] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.209289] pci 0000:00:01.0: bridge window [mem 0xbf000000-0xbfffffff]
[ 0.209338] pci 0000:00:01.0: bridge window [mem
0xe0000000-0xfebfffff pref]
[ 0.209398] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.209402] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.209406] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.209410] pci_bus 0000:01: resource 1 [mem 0xbf000000-0xbfffffff]
[ 0.209414] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xfebfffff pref]
[ 0.209580] NET: Registered protocol family 2
[ 0.210731] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.210852] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.211771] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.211929] TCP: reno registered
[ 0.211976] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.211976] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.211976] NET: Registered protocol family 1
[ 0.325101] pci 0000:01:00.0: Boot video device
[ 0.325114] PCI: CLS 32 bytes, default 64
[ 0.325493] Unpacking initramfs...
[ 0.874415] Freeing initrd memory: 14676K (f69a9000 - f77fe000)
[ 0.874613] Simple Boot Flag at 0x3a set to 0x1
[ 0.875354] microcode: CPU0 sig=0xf34, pf=0x4, revision=0x17
[ 0.875439] microcode: CPU1 sig=0xf34, pf=0x4, revision=0x17
[ 0.875760] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.877258] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.877428] audit: initializing netlink subsys (disabled)
[ 0.877591] audit: type=2000 audit(1407708024.875:1): initialized
[ 0.878595] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.879190] VFS: Disk quotas dquot_6.5.2
[ 0.879287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.879811] msgmni has been set to 1717
[ 0.881526] alg: No test for stdrng (krng)
[ 0.881666] bounce: pool size: 64 pages
[ 0.881763] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.882008] io scheduler noop registered
[ 0.882055] io scheduler deadline registered
[ 0.882148] io scheduler cfq registered (default)
[ 0.882653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.882897] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.883390] GHES: HEST is not enabled!
[ 0.883659] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.904488] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.906568] Linux agpgart interface v0.103
[ 0.906916] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
[ 0.924536] agpgart-sis 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.925055] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 0.925795] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.925891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.926951] mousedev: PS/2 mouse device common for all mice
[ 0.927422] rtc_cmos 00:04: RTC can wake from S4
[ 0.927958] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.928073] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
[ 0.928393] TCP: cubic registered
[ 0.928597] NET: Registered protocol family 10
[ 0.929753] mip6: Mobile IPv6
[ 0.929823] NET: Registered protocol family 17
[ 0.929880] mpls_gso: MPLS GSO support
[ 0.930801] Using IPI No-Shortcut mode
[ 0.931489] registered taskstats version 1
[ 0.933064] rtc_cmos 00:04: setting system clock to 2014-08-10
22:00:26 UTC (1407708026)
[ 0.933427] PM: Hibernation image not present or could not be loaded.
[ 0.934254] Freeing unused kernel memory: 488K (c16bf000 - c1739000)
[ 0.934352] Write protecting the kernel text: 4412k
[ 0.934593] Write protecting the kernel read-only data: 1980k
[ 0.948804] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.043259] systemd-udevd[63]: starting version 208
[ 1.045786] random: systemd-udevd urandom read with 0 bits of entropy
available
[ 1.115834] ACPI: bus type USB registered
[ 1.116242] usbcore: registered new interface driver usbfs
[ 1.117192] usbcore: registered new interface driver hub
[ 1.118047] usbcore: registered new device driver usb
[ 1.120384] SCSI subsystem initialized
[ 1.123363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.127546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.128744] ehci-pci: EHCI PCI platform driver
[ 1.132881] libata version 3.00 loaded.
[ 1.133856] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.135842] ehci-pci 0000:00:03.3: new USB bus registered, assigned
bus number 1
[ 1.138930] ehci-pci 0000:00:03.3: irq 23, io mem 0xbd800000
[ 1.148578] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.149860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.149932] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.149998] usb usb1: Product: EHCI Host Controller
[ 1.150054] usb usb1: Manufacturer: Linux 3.16.0+ ehci_hcd
[ 1.150113] usb usb1: SerialNumber: 0000:00:03.3
[ 1.152763] sis900.c: v1.08.10 Apr. 2 2006
[ 1.153195] hub 1-0:1.0: USB hub found
[ 1.153354] hub 1-0:1.0: 6 ports detected
[ 1.157615] pata_sis 0000:00:02.5: version 0.5.2
[ 1.157824] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133
controller
[ 1.163387] ohci-pci: OHCI PCI platform driver
[ 1.166704] scsi host0: pata_sis
[ 1.175319] EATA0: warning, DMA protocol support not asserted.
[ 1.175401] EATA0: IRQ 11 mapped to IO-APIC IRQ 16.
[ 1.175446] ------------[ cut here ]------------
[ 1.175496] WARNING: CPU: 0 PID: 66 at kernel/locking/lockdep.c:2744
lockdep_trace_alloc+0xd3/0xd5()
[ 1.175548] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
[ 1.175584] Modules linked in: eata(+) r8169(+) firewire_ohci(+)
ohci_pci(+) firewire_core crc_itu_t sis900(+) mii floppy(+) pata_sis(+)
ehci_pci ohci_hcd libata ehci_hcd usbcore usb_common scsi_mod
[ 1.176090] CPU: 0 PID: 66 Comm: systemd-udevd Not tainted 3.16.0+ #1141
[ 1.176090] Hardware name: System Manufacturer System Name/P4S800,
BIOS ASUS P4S800 ACPI BIOS Revision 1011 Beta 001 08/30/2005
[ 1.176090] 00000000 00000000 f43e7a40 c1446a24 f43e7a84 f43e7a74
c1043f4a c159c994
[ 1.176603] f43e7aa0 00000042 c159ec53 00000ab8 c107f845 00000ab8
c107f845 00000082
[ 1.176603] f712c800 000080d0 f43e7a8c c1043f8f 00000009 f43e7a84
c159c994 f43e7aa0
[ 1.176603] Call Trace:
[ 1.176603] [<c1446a24>] dump_stack+0x41/0x52
[ 1.176603] [<c1043f4a>] warn_slowpath_common+0x7d/0x94
[ 1.176603] [<c107f845>] ? lockdep_trace_alloc+0xd3/0xd5
[ 1.176603] [<c107f845>] ? lockdep_trace_alloc+0xd3/0xd5
[ 1.176603] [<c1043f8f>] warn_slowpath_fmt+0x2e/0x30
[ 1.176603] [<c107f845>] lockdep_trace_alloc+0xd3/0xd5
[ 1.176603] [<c11421ea>] kmem_cache_alloc_trace+0x24/0x3f7
[ 1.176603] [<c108cdee>] ? vprintk_emit+0x2d9/0x633
[ 1.176603] [<c123d2b1>] ? radix_tree_lookup+0x14/0x16
[ 1.176603] [<f814650d>] ? eata2x_eh_host_reset+0x4d8/0x4d8 [eata]
[ 1.176603] [<c1090287>] request_threaded_irq+0x63/0x107
[ 1.176603] [<f81481ac>] port_detect+0xa66/0xf14 [eata]
[ 1.176603] [<c1030d66>] ? ioapic_write_entry+0x17/0x43
[ 1.176603] [<c107cb76>] ? trace_hardirqs_on_caller+0x12f/0x1b7
[ 1.176603] [<c107cc09>] ? trace_hardirqs_on+0xb/0xd
[ 1.176603] [<c1030d8b>] ? ioapic_write_entry+0x3c/0x43
[ 1.176603] [<c1031c3c>] ? io_apic_setup_irq_pin+0x175/0x319
[ 1.176603] [<c107cb76>] ? trace_hardirqs_on_caller+0x12f/0x1b7
[ 1.176603] [<c1032d7f>] ? io_apic_setup_irq_pin_once+0x83/0xd1
[ 1.176603] [<c107ce2a>] ? debug_check_no_locks_freed+0x9d/0x152
[ 1.176603] [<c1142514>] ? kmem_cache_alloc_trace+0x34e/0x3f7
[ 1.176603] [<c134d1bc>] ? pci_conf1_read+0x43/0xdd
[ 1.176603] [<c144064c>] ? klist_next+0x1b/0xef
[ 1.176603] [<c144071e>] ? klist_next+0xed/0xef
[ 1.176603] [<c144c5b4>] ? _raw_spin_unlock+0x1d/0x20
[ 1.176603] [<c144071e>] ? klist_next+0xed/0xef
[ 1.176603] [<c126b586>] ? pci_do_find_bus+0x36/0x36
[ 1.176603] [<c12ffeb8>] ? bus_find_device+0x5b/0x7d
[ 1.176603] [<c12fde7b>] ? put_device+0xf/0x11
[ 1.176603] [<c126a0d2>] ? pci_dev_put+0xf/0x11
[ 1.176603] [<c126b71e>] ? pci_get_dev_by_id+0x3f/0x8a
[ 1.176603] [<c126b586>] ? pci_do_find_bus+0x36/0x36
[ 1.176603] [<c126b864>] ? pci_get_class+0x46/0x48
[ 1.176603] [<f8148733>] eata2x_detect+0xd9/0x3ef [eata]
[ 1.176603] [<c107cb76>] ? trace_hardirqs_on_caller+0x12f/0x1b7
[ 1.176603] [<f8024000>] ? 0xf8024000
[ 1.176603] [<f8024054>] init_this_scsi_driver+0x54/0x1000 [eata]
[ 1.176603] [<f8024000>] ? 0xf8024000
[ 1.176603] [<c1000452>] do_one_initcall+0x9c/0x1c4
[ 1.176603] [<f8024000>] ? 0xf8024000
[ 1.176603] [<c107cc09>] ? trace_hardirqs_on+0xb/0xd
[ 1.176603] [<c1134787>] ? __vunmap+0x77/0xcd
[ 1.176603] [<c10b39d7>] load_module+0x1cd3/0x256a
[ 1.176603] [<c10b43d4>] SyS_finit_module+0x6e/0xa7
[ 1.176603] [<c10797ce>] ? up_write+0x16/0x32
[ 1.176603] [<c111b474>] ? vm_mmap_pgoff+0x75/0x92
[ 1.176603] [<c144d02a>] syscall_call+0x7/0x7
[ 1.176603] ---[ end trace 0a1b5d775e787003 ]---
[ 1.181449] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 1.181508] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n,
ip:n, ep:n, pp:y.
[ 1.181579] EATA0: 2.0C, PCI 0x7410, IRQ 16, BMST, SG 122, MB 64.
[ 1.181632] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 1.181684] EATA0: SCSI channel 0 enabled, host target ID 7.
[ 1.181751] scsi host2: EATA/DMA 2.0x rev. 8.10.00
Arthur.
prev parent reply other threads:[~2014-08-10 12:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 8:26 [PATCH] eata: remove driver_lock Christoph Hellwig
2014-07-26 16:25 ` Christoph Hellwig
2014-07-26 16:45 ` Martin K. Petersen
2014-07-31 17:30 ` Christoph Hellwig
2014-08-05 15:20 ` Hannes Reinecke
2014-08-10 12:42 ` Arthur Marsh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53E768BA.7000308@internode.on.net \
--to=arthur.marsh@internode.on.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.