Re: [PATCH] scsi: Fix qemu boot hang problem

[Jens Axboe <axboe@kernel.dk>]

On 2014-08-10 06:54, Guenter Roeck wrote:
> The latest kernel fails to boot qemu arm images when using scsi
> for disk access. Boot gets stuck after the following messages.
>
> brd: module loaded
> sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103)
> sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym0: SCSI BUS has been reset.
> scsi host0: sym-2.2.3
>
> Bisect points to commit 71e75c97f97a ("scsi: convert device_busy to
> atomic_t"). Code inspection shows the following suspicious change
> in scsi_request_fn.
>
> out_delay:
> -       if (sdev->device_busy == 0 && !scsi_device_blocked(sdev))
> +       if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
> 		blk_delay_queue(q, SCSI_QUEUE_DELAY);
> 	}
>
> 'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)',
> meaning the logic was reversed. Changing this expression to
> '!atomic_read(&sdev->device_busy)' fixes the problem.
>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Webb Scales <webbnh@hp.com>
> Cc: Jens Axboe <axboe@kernel.dk>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
>   drivers/scsi/scsi_lib.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 9c44392..ce62e87 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1774,7 +1774,7 @@ static void scsi_request_fn(struct request_queue *q)
>   	blk_requeue_request(q, req);
>   	atomic_dec(&sdev->device_busy);
>   out_delay:
> -	if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
> +	if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
>   		blk_delay_queue(q, SCSI_QUEUE_DELAY);
>   }
>
>

That's a no-brainer obvious fix!

Acked-by: Jens Axboe <axboe@fb.com>


-- 
Jens Axboe