Hi Rudolf,

same result with the core-image-base.

It seems that depmod is not run before building the image/modules in the deploy folder. I have a custom kernel recipes. How can I make bitbake to run depmod -a on the rootfs?

My recipes inherits kernel

and requires

recipes-kernel/linux/linux-yocto.inc


Cheers,

Markus


On 08.08.2014 17:52, Rudolf Streif wrote:

Hi Markus,

Please try core-image-base instead of core-image-minimal. That should provide you with the necessary network support.

Best regards,
Rudi

On Aug 8, 2014 6:46 AM, "Dr. Markus Eich" <markus.eich@dfki.de> wrote:
Dear all,

I am setting up my Odroid XU with yocto using the core-image-minimal receipe. Almost done and I am able to boot the system and log in via screen (UART), but..

The network is not present at start-up. When I do lsmod I just see "Not tainted" and no modules are loaded.

The module I need to load is the smsc95xx module. When I tried to load the driver with "modpobe" it could not find the driver (although it is in /lib/modules/3.4.98-custom/kernel/drivers/net/usb)
I had to manually add it to /lib/modules/3.4.98-custom/modules.dep (which was empty after the bitbake process in rootfs)

So I added
"kernel/drivers/net/usb/smsc95xx.ko: " to modules.dep.

Then I could load it with modprobe. In order to load it at startup

I created a /etc/modules with the content "smsc95xx". Now my question:

Is there an easier (bitbake) way to make the modules load at startup without editing configs on the target device? Am I missing something? Does core-image-minimal not include network?

Cheers,

Markus




--
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
  Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
  Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   markus.eich@dfki.de

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------

--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto

-- 
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   markus.eich@dfki.de

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster 
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3 
 -----------------------------------------------------------------------