From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board
Date: Thu, 14 Aug 2014 10:19:03 -0700 [thread overview]
Message-ID: <53ECEF87.5020000@freescale.com> (raw)
In-Reply-To: <1407998707-9632-16-git-send-email-b18965@freescale.com>
On 08/13/2014 11:45 PM, Alison Wang wrote:
> From: Wang Huan <b18965@freescale.com>
>
> This patch is to add LETECH support for LS1021AQDS/TWR board.
> For LETECH, lpuart is used as console.
>
> Signed-off-by: Jason Jin <jason.jin@freescale.com>
> Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
> Signed-off-by: Alison Wang <alison.wang@freescale.com>
> ---
> Change log:
> v4: No change.
> v3: New file.
>
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021atwr/MAINTAINERS | 1 +
> configs/ls1021aqds_letech_defconfig | 3 +++
> configs/ls1021atwr_letech_defconfig | 3 +++
> include/configs/ls1021aqds.h | 13 +++++++++++++
> include/configs/ls1021atwr.h | 12 ++++++++++++
> 6 files changed, 33 insertions(+)
> create mode 100644 configs/ls1021aqds_letech_defconfig
> create mode 100644 configs/ls1021atwr_letech_defconfig
I suggest you update README to add some information about this LETECH. I have no
idea what it is until I dig into some internal documents.
York
next prev parent reply other threads:[~2014-08-14 17:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-14 6:44 [U-Boot] [PATCH v4 0/18] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 01/18] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 02/18] ls102xa: i2c: Add i2c support for LS102xA Alison Wang
2014-08-14 17:04 ` York Sun
2014-08-15 14:33 ` AlisonWang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 03/18] net: Merge asm/fsl_enet.h into fsl_mdio.h Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 04/18] net: mdio: Add private MDIO read/write function Alison Wang
2014-08-14 16:57 ` York Sun
2014-08-15 14:29 ` AlisonWang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 05/18] net: mdio: Use mb() to be compatible for both ARM and PowerPC Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 06/18] ls102xa: etsec: Add etsec support for LS102xA Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 07/18] ls102xa: esdhc: Add esdhc " Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 08/18] driver/ddr/freescale: Add support of accumulate ECC Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 09/18] driver/ddr/freescale: Fix DDR3 driver for ARM Alison Wang
2014-08-14 6:44 ` [U-Boot] [PATCH v4 10/18] driver/ddr/fsl: Add support of overriding chip select write leveling Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 11/18] arm: ls102xa: Add basic support for LS1021AQDS board Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 12/18] arm: ls102xa: Add basic support for LS1021ATWR board Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 13/18] net: tsec: Remove tx snooping support from LS1 Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 14/18] serial: lpuart: add 32-bit registers lpuart support Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 15/18] arm: ls102xa: Add LETECH support for LS1021AQDS/TWR board Alison Wang
2014-08-14 17:19 ` York Sun [this message]
2014-08-15 14:44 ` AlisonWang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 16/18] video: dcu: Add Sii9022A HDMI Transmitter support Alison Wang
2014-08-14 17:17 ` York Sun
2014-08-15 14:42 ` AlisonWang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 17/18] video: dcu: Add DCU driver support Alison Wang
2014-08-14 6:45 ` [U-Boot] [PATCH v4 18/18] ls102xa: dcu: Add platform support for DCU on LS1021ATWR board Alison Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53ECEF87.5020000@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.