All of lore.kernel.org
 help / color / mirror / Atom feed
From: Murali Karicheri <m-karicheri2@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: Re: [GIT PULL] PCI changes for v3.17 (part 3)
Date: Tue, 19 Aug 2014 13:02:32 -0400	[thread overview]
Message-ID: <53F38328.3060409@ti.com> (raw)
In-Reply-To: <CAErSpo6GfCE8yT2Dda1JJsoPQhFD_b0GhB=OZ6w854ZB_B6eqA@mail.gmail.com>

Bjorn,

On 08/19/2014 12:30 PM, Bjorn Helgaas wrote:
> On Tue, Aug 19, 2014 at 10:10 AM, Murali Karicheri<m-karicheri2@ti.com>  wrote:
>> Hi Bjorn,
>>
>> I see you have pulled in my designware related patches for Keystone PCI in
>> this request. When do you think you can pull in Keystone PCI driver (v8) on
>> the list?
>
> The things in this pull request have been in linux-next for a month.
> I'm ready to apply the Keystone driver, but since we're after the
> merge window and the Keystone driver hasn't been in -next at all, I
> plan to put it in v3.18.
>
> I know I hoped to get this in v3.17, but even if I merged it today I
> would let it soak in -next for a week or so, and then we'd be past
> v3.17-rc2, and that feels past the reasonable point for a pull
> request.
>

Looks good to me. Thanks and regards,

Murali
> Bjorn
>
>> -------- Original Message --------
>> Subject: [GIT PULL] PCI changes for v3.17 (part 3)
>> Date: Mon, 18 Aug 2014 22:40:50 -0600
>> From: Bjorn Helgaas<bhelgaas@google.com>
>> To: Linus Torvalds<torvalds@linux-foundation.org>
>> CC:<linux-pci@vger.kernel.org>,<linux-kernel@vger.kernel.org>, "Murali
>> Karicheri"<m-karicheri2@ti.com>, Kishon Vijay Abraham I<kishon@ti.com>,
>> Thierry Reding<treding@nvidia.com>, Andrew Lunn<andrew@lunn.ch>
>>
>> Hi Linus,
>>
>> I screwed up.  I intended these changes for v3.17, and I put them in my
>> 'next' branch just before leaving on vacation, but I forgot to include them
>> in my merge window pull request when I returned.  They're low-risk, so I'm
>> sending them to you now (late), but the world won't end if they wait until
>> v3.18.
>>
>> The main reason to include them would be to support the TI DRA7xx.
>>
>> Bjorn
>>
>>
>> The following changes since commit 792688fde431b4fdb2cf10a6f7589a8176b6b14a:
>>
>>    Merge branches 'pci/host-generic', 'pci/host-mvebu', 'pci/host-rcar',
>> 'pci/host-tegra', 'pci/msi', 'pci/misc', 'pci/resource' and
>> 'pci/virtualization' into next (2014-07-16 17:09:47 -0600)
>>
>> are available in the git repository at:
>>
>>    git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
>> tags/pci-v3.17-changes-3
>>
>> for you to fetch changes up to 981c191778a4f92bc82456205a444d522843a630:
>>
>>    Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next (2014-07-22 17:55:50 -0600)
>>
>> ----------------------------------------------------------------
>> PCI changes for v3.17 (part 3):
>>
>>    Marvell MVEBU
>>      - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)
>>
>>    NVIDIA Tegra
>>      - Add debugfs support (Thierry Reding)
>>
>>    Synopsys DesignWare
>>      - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay
>> Abraham I)
>>      - Program ATU with untranslated address (Kishon Vijay Abraham I)
>>      - Add config access-related pcie_host_ops for v3.65 hardware (Murali
>> Karicheri)
>>      - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
>>
>>    TI DRA7xx
>>      - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)
>>
>> ----------------------------------------------------------------
>> Andrew Lunn (1):
>>        PCI: mvebu: Remove ARCH_KIRKWOOD dependency
>>
>> Bjorn Helgaas (1):
>>        Merge branches 'pci/host-designware', 'pci/host-mvebu' and
>> 'pci/host-tegra' into next
>>
>> Kishon Vijay Abraham I (3):
>>        PCI: designware: Look for configuration space in 'reg', not 'ranges'
>>        PCI: designware: Program ATU with untranslated address
>>        PCI: dra7xx: Add TI DRA7xx PCIe driver
>>
>> Murali Karicheri (2):
>>        PCI: designware: Add config access-related pcie_host_ops for v3.65
>> hardware
>>        PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
>>
>> Thierry Reding (1):
>>        PCI: tegra: Add debugfs support
>>
>>   .../devicetree/bindings/pci/designware-pcie.txt    |   4 +
>>   Documentation/devicetree/bindings/pci/ti-pci.txt   |  59 +++
>>   MAINTAINERS                                        |   8 +
>>   drivers/pci/host/Kconfig                           |  11 +-
>>   drivers/pci/host/Makefile                          |   1 +
>>   drivers/pci/host/pci-dra7xx.c                      | 458
>> +++++++++++++++++++++
>>   drivers/pci/host/pci-tegra.c                       | 118 ++++++
>>   drivers/pci/host/pcie-designware.c                 | 134 ++++--
>>   drivers/pci/host/pcie-designware.h                 |  11 +
>>   9 files changed, 771 insertions(+), 33 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
>>   create mode 100644 drivers/pci/host/pci-dra7xx.c


  reply	other threads:[~2014-08-19 17:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-19  4:40 [GIT PULL] PCI changes for v3.17 (part 3) Bjorn Helgaas
2014-08-19 15:10 ` Fwd: " Murali Karicheri
2014-08-19 16:30   ` Bjorn Helgaas
2014-08-19 17:02     ` Murali Karicheri [this message]
2014-09-02 14:52     ` Murali Karicheri
2014-09-04 21:05       ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53F38328.3060409@ti.com \
    --to=m-karicheri2@ti.com \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.