From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephen Warren <swarren@wwwdotorg.org>
Date: Tue, 26 Aug 2014 11:04:56 -0600
Subject: [U-Boot] [PATCH v2 01/40] vsprintf: Add modifier for phys_addr_t
In-Reply-To: <1409067268-956-2-git-send-email-thierry.reding@gmail.com>
References: <1409067268-956-1-git-send-email-thierry.reding@gmail.com>
	<1409067268-956-2-git-send-email-thierry.reding@gmail.com>
Message-ID: <53FCBE38.9020304@wwwdotorg.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 08/26/2014 09:33 AM, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> Provide a new modifier to vsprintf() to print phys_addr_t variables to
> avoid having to cast or #ifdef when printing them out. The %pa modifier
> is used for this purpose, so phys_addr_t variables need to be passed by
> reference, like so:
>
> 	phys_addr_t start = 0;
>
> 	printf("start: %pa\n", &start);
>
> Depending on the size of phys_addr_t this will print out the address
> with 8 or 16 hexadecimal digits following a 0x prefix.

The series,

Tested-by: Stephen Warren <swarren@nvidia.com>

Note that I did see the following printed a couple of times when I 
executed "run bootcmd_pxe":

pci_hose_bus_to_phys: invalid physical address

... but everything worked perfectly, so I guess we can track that down 
later.