From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register
Date: Thu, 28 Aug 2014 13:12:41 +0200 [thread overview]
Message-ID: <53FF0EA9.9020000@gmail.com> (raw)
In-Reply-To: <1403605086-3975-1-git-send-email-josh.wu@atmel.com>
On 06/24/2014 12:18 PM, Josh Wu wrote:
> We defined the macro pmecc_readl(b)/pmecc_writel for pmecc register access.
> But in the driver we also use the readl(b)/writel.
> To keep consistent, this patch make all use pmecc_readl(b)/pmecc_writel.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Andreas Bie?mann <andreas.devel@googlemail.com>
> ---
> drivers/mtd/nand/atmel_nand.c | 21 +++++++++++----------
> drivers/mtd/nand/atmel_nand_ecc.h | 3 +++
> 2 files changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index e73834d..ccc4dc0 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -164,7 +164,7 @@ static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
>
> /* Fill odd syndromes */
> for (i = 0; i < host->pmecc_corr_cap; i++) {
> - value = readl(&host->pmecc->rem_port[sector].rem[i / 2]);
> + value = pmecc_readl(host->pmecc, rem_port[sector].rem[i / 2]);
> if (i & 1)
> value >>= 16;
> value &= 0xffff;
> @@ -392,10 +392,11 @@ static int pmecc_err_location(struct mtd_info *mtd)
> int16_t *smu = host->pmecc_smu;
> int timeout = PMECC_MAX_TIMEOUT_US;
>
> - writel(PMERRLOC_DISABLE, &host->pmerrloc->eldis);
> + pmecc_writel(host->pmerrloc, eldis, PMERRLOC_DISABLE);
>
> for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
> - writel(smu[(cap + 1) * num + i], &host->pmerrloc->sigma[i]);
> + pmecc_writel(host->pmerrloc, sigma[i],
> + smu[(cap + 1) * num + i]);
> err_nbr++;
> }
>
> @@ -403,12 +404,12 @@ static int pmecc_err_location(struct mtd_info *mtd)
> if (sector_size == 1024)
> val |= PMERRLOC_ELCFG_SECTOR_1024;
>
> - writel(val, &host->pmerrloc->elcfg);
> - writel(sector_size * 8 + host->pmecc_degree * cap,
> - &host->pmerrloc->elen);
> + pmecc_writel(host->pmerrloc, elcfg, val);
> + pmecc_writel(host->pmerrloc, elen,
> + sector_size * 8 + host->pmecc_degree * cap);
>
> while (--timeout) {
> - if (readl(&host->pmerrloc->elisr) & PMERRLOC_CALC_DONE)
> + if (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_CALC_DONE)
> break;
> WATCHDOG_RESET();
> udelay(1);
> @@ -419,7 +420,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
> return -1;
> }
>
> - roots_nbr = (readl(&host->pmerrloc->elisr) & PMERRLOC_ERR_NUM_MASK)
> + roots_nbr = (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_ERR_NUM_MASK)
> >> 8;
> /* Number of roots == degree of smu hence <= cap */
> if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
> @@ -443,7 +444,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
> sector_size = host->pmecc_sector_size;
>
> while (err_nbr) {
> - tmp = readl(&host->pmerrloc->el[i]) - 1;
> + tmp = pmecc_readl(host->pmerrloc, el[i]) - 1;
> byte_pos = tmp / 8;
> bit_pos = tmp % 8;
>
> @@ -597,7 +598,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
>
> pos = i * host->pmecc_bytes_per_sector + j;
> chip->oob_poi[eccpos[pos]] =
> - readb(&host->pmecc->ecc_port[i].ecc[j]);
> + pmecc_readb(host->pmecc, ecc_port[i].ecc[j]);
> }
> }
> chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
> diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
> index 55d7711..92d4ec5 100644
> --- a/drivers/mtd/nand/atmel_nand_ecc.h
> +++ b/drivers/mtd/nand/atmel_nand_ecc.h
> @@ -34,6 +34,9 @@
> #define pmecc_readl(addr, reg) \
> readl(&addr->reg)
>
> +#define pmecc_readb(addr, reg) \
> + readb(&addr->reg)
> +
> #define pmecc_writel(addr, reg, value) \
> writel((value), &addr->reg)
>
>
next prev parent reply other threads:[~2014-08-28 11:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 10:18 [U-Boot] [PATCH] mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register Josh Wu
2014-08-28 11:12 ` Andreas Bießmann [this message]
2014-09-19 6:31 ` [U-Boot] " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FF0EA9.9020000@gmail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.