From: John Edwards <john.edwards@linguamatics.com>
To: stgt@vger.kernel.org
Subject: Fwd: Forcing release of rx on CentOS 6
Date: Thu, 28 Aug 2014 15:53:42 +0100 [thread overview]
Message-ID: <53FF4276.3010006@linguamatics.com> (raw)
In-Reply-To: <53FF3FDD.7040400@linguamatics.com>
Hi,
I'm suffering some serious performance issues with a pair of iSCSI
servers based on CentOS 6 and tgtg. VMs using the storage regularly lock
up for a while before returning to normal operation.
I have matched up VM lockups to errors like this in the logs of the
iSCSI servers.
Aug 28 14:32:26 delia-mgt tgtd: conn_close(101) connection closed,
0x1264a88 1
Aug 28 14:32:26 delia-mgt tgtd: conn_close(107) sesson 0x1242330 1
Aug 28 14:32:26 delia-mgt tgtd: conn_close(101) connection closed,
0x1249068 4
Aug 28 14:32:26 delia-mgt tgtd: conn_close(107) sesson 0x1244520 1
Aug 28 14:32:26 delia-mgt tgtd: conn_close(165) Forcing release of rx
task 0x1255210 e000001a
Aug 28 14:32:26 delia-mgt tgtd: conn_close(101) connection closed,
0x12647b8 3
Aug 28 14:32:26 delia-mgt tgtd: conn_close(107) sesson 0x1255fe0 1
Aug 28 14:32:26 delia-mgt tgtd: conn_close(165) Forcing release of rx
task 0x1255770 b000004d
DD tests from within the VMs show very poor write performance, the DD
tests also trigger the above errors:
[root@centos65 ~]# dd if=/dev/zero of=/dev/drbd0 bs=1M count=1024
conv=sync
1024+0 records in
1024+0 records out
1073741824 bytes (1.1 GB) copied, 176.358 s, 6.1 MB/s
But iperf tests between VMs and the iSCSI server show ~800Mbs and the
raw sequential writes to the DRBD volume is ~1.8Gbs
To elaborate on my setup I have:
* 2 CentOS 6 servers in a Red Hat Cluster (CMAN) cluster
o They operate in a Primary/Secondary configuration
o They replicate using DRBD
o They only serve a single target to a pool of 3 xenservers
My targets.conf is very simple:
default-driver iscsi
<target iqn.2014-07.com.linguamatics:iscsi0>
backing-store /dev/drbd0
initiator-address 10.252.15.0/24
incominguser iscsi $secret_goes_here
</target>
Here is my cluster conf if it is of any use:
<?xml version="1.0"?>
<cluster config_version="1" name="cluiscsi">
<cman expected_votes="1" two_node="1"/>
<clusternodes>
<clusternode name="delia-mgt.linguamatics.com" nodeid="1">
<fence>
<method name="ipmi">
<device action="reboot" delay="15" name="idrac01"/>
</method>
</fence>
</clusternode>
<clusternode name="deirdre-mgt.linguamatics.com" nodeid="2">
<fence>
<method name="ipmi">
<device action="reboot" name="idrac02"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice agent="fence_ipmilan"
ipaddr="delia-idrac.linguamatics.com" login="root" name="idrac01"
passwd="$secret"/>
<fencedevice agent="fence_ipmilan"
ipaddr="deirdre-idrac.linguamatics.com" login="root" name="idrac02"
passwd="$secret"/>
</fencedevices>
<fence_daemon post_join_delay="30"/>
<totem rrp_mode="none" secauth="off"/>
<rm>
<failoverdomains>
<failoverdomain name="drbd-delia" nofailback="0"
ordered="1" restricted="1">
<failoverdomainnode name="delia-mgt.linguamatics.com"
priority="1"/>
</failoverdomain>
<failoverdomain name="drbd-deirdre" nofailback="0"
ordered="1" restricted="1">
<failoverdomainnode name="deirdre-mgt.linguamatics.com"
priority="1"/>
</failoverdomain>
<failoverdomain name="iscsi" nofailback="1" ordered="1"
restricted="1">
<failoverdomainnode name="delia-mgt.linguamatics.com"
priority="1"/>
<failoverdomainnode name="deirdre-mgt.linguamatics.com"
priority="2"/>
</failoverdomain>
</failoverdomains>
<resources>
<drbd name="res0" resource="r0"/>
<script file="/etc/init.d/drbd" name="drbd"/>
<script file="/etc/init.d/tgtd" name="iscsid"/>
</resources>
<service autostart="1" domain="drbd-delia" exclusive="0"
name="drbddelia" recovery="restart">
<script ref="drbd"/>
</service>
<service autostart="1" domain="drbd-deirdre" exclusive="0"
name="drbddeirdre" recovery="restart">
<script ref="drbd"/>
</service>
<service autostart="1" domain="iscsi" exclusive="0"
name="iscsi" recovery="relocate">
<drbd ref="res0">
<ip address="10.252.15.15" monitor_link="on"
sleeptime="10">
<script ref="iscsid"/>
</ip>
</drbd>
</service>
</rm>
</cluster>
Does anyone have any idea what is causing these errors?
Thanks in advance,
John Edwards
next parent reply other threads:[~2014-08-28 14:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <53FF3FDD.7040400@linguamatics.com>
2014-08-28 14:53 ` John Edwards [this message]
2014-08-29 6:59 ` Fwd: Forcing release of rx on CentOS 6 John Edwards
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FF4276.3010006@linguamatics.com \
--to=john.edwards@linguamatics.com \
--cc=stgt@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.