From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai/Ipipe on arm with LPAE enabled not booting
Date: Thu, 28 Aug 2014 22:59:23 +0200 [thread overview]
Message-ID: <53FF982B.2040203@xenomai.org> (raw)
In-Reply-To: <20140828205109.GC17690@csclub.uwaterloo.ca>
On 08/28/2014 10:51 PM, Lennart Sorensen wrote:
> On Thu, Aug 28, 2014 at 10:49:18PM +0200, Gilles Chanteperdrix wrote:
>> If you have JTAG with gdb server, then simply connect gdb and dump
>> printk_buf.
>
> Yeah I guess I could do that, but then I have to use eclipse because it
> is ti's debugger. But I will if I have to.
Yet another solution is to enable early printk via the "DCC" channel,
which should normally get the early printks to be sent to the JTAG. You
can then ask your JTAG to display the messages.
The openocd command seems to be "target_request debugmsgs charmsg". I
have never tried this on TI processors, but I have tried it on other
processors with other JTAG, which shows that at least, on Linux side, it
works.
--
Gilles.
next prev parent reply other threads:[~2014-08-28 20:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-28 20:35 [Xenomai] Xenomai/Ipipe on arm with LPAE enabled not booting Lennart Sorensen
2014-08-28 20:40 ` Gilles Chanteperdrix
2014-08-28 20:47 ` Lennart Sorensen
2014-08-28 20:49 ` Gilles Chanteperdrix
2014-08-28 20:51 ` Lennart Sorensen
2014-08-28 20:53 ` Gilles Chanteperdrix
2014-08-28 21:41 ` Lennart Sorensen
2014-08-28 20:59 ` Gilles Chanteperdrix [this message]
2014-08-28 22:01 ` [Xenomai] Xenomai/Ipipe on arm with LPAE enabled not booting - now with crash message Lennart Sorensen
2014-08-28 22:13 ` Gilles Chanteperdrix
2014-08-28 23:16 ` Lennart Sorensen
2014-09-03 12:54 ` Lennart Sorensen
2014-09-03 13:21 ` Lennart Sorensen
2014-09-03 13:39 ` Gilles Chanteperdrix
2014-09-03 14:29 ` Lennart Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FF982B.2040203@xenomai.org \
--to=gilles.chanteperdrix@xenomai.org \
--cc=lsorense@csclub.uwaterloo.ca \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.