From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-arm/master
Date: Thu, 28 Aug 2014 23:19:49 +0200 [thread overview]
Message-ID: <53FF9CF5.1060309@redhat.com> (raw)
In-Reply-To: <20140828195008.GQ19374@bill-the-cat>
Hi,
On 08/28/2014 09:50 PM, Tom Rini wrote:
> On Thu, Aug 28, 2014 at 01:02:57PM -0400, Tom Rini wrote:
>
>> Hi me,
>>
>> The following changes since commit e76b933e02e1b38e48754c435e9dba1c0deeb3c6:
>>
>> Prepare v2014.10-rc1 (2014-08-06 09:12:58 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm next
>>
>> for you to fetch changes up to 1899fac925eda817e12234aef3d01d354788662e:
>>
>> Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master' (2014-08-09 16:48:34 +0200)
>>
>> ----------------------------------------------------------------
>>
>> Albert ARIBAUD (1):
>> Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'
>>
>> Hans de Goede (8):
>> sun4i: add USB EHCI settings
>> sun5i: add USB EHCI settings
>> sunxi: Enable EHCI on various sunxi boards
>> sunxi: Add CONFIG_MACPWR option
>> sun4i: Add support for a number of new sun4i boards
>> sun5i: Add support for a number of new sun5i boards
>> sun7i: Add support for a number of new sun7i boards
>> sun7i: Add bananapi board
>>
>> Ian Campbell (2):
>> ahci: provide sunxi SATA driver using AHCI platform framework
>> cubieboard2: Enable AXP209 power controller
>>
>> Marc Zyngier (2):
>> sunxi: HYP/non-sec: add sun7i PSCI backend
>> sunxi: HYP/non-sec: configure CNTFRQ on all CPUs
>>
>> Roman Byshko (5):
>> sunxi: add defines to control USB Host clocks/resets
>> sunxi: add USB EHCI driver
>> sunxi: add general USB settings
>> sun7i: add USB EHCI settings
>> sun7i: cubietruck: enable USB EHCI
>>
>> arch/arm/cpu/armv7/sunxi/Makefile | 3 +
>> arch/arm/cpu/armv7/sunxi/board.c | 5 +
>> arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 4 +
>> arch/arm/cpu/armv7/sunxi/psci.S | 162 ++++++++++++++++++++
>> arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 15 +-
>> board/sunxi/MAINTAINERS | 19 ++-
>> board/sunxi/Makefile | 16 ++
>> board/sunxi/ahci.c | 84 +++++++++++
>> board/sunxi/dram_a10_olinuxino_l.c | 31 ++++
>> board/sunxi/dram_a10s_olinuxino_m.c | 31 ++++
>> board/sunxi/dram_a13_olinuxino.c | 31 ++++
>> board/sunxi/dram_bananapi.c | 31 ++++
>> board/sunxi/dram_linksprite_pcduino3.c | 31 ++++
>> board/sunxi/dram_sun4i_360_1024_iow16.c | 31 ++++
>> board/sunxi/dram_sun4i_360_1024_iow8.c | 31 ++++
>> board/sunxi/dram_sun4i_360_512.c | 31 ++++
>> board/sunxi/dram_sun4i_384_1024_iow8.c | 31 ++++
>> board/sunxi/dram_sun7i_384_1024_iow16.c | 31 ++++
>> board/sunxi/dram_sun7i_384_512_busw16_iow16.c | 31 ++++
>> configs/A10-OLinuXino-Lime_defconfig | 4 +
>> configs/A10s-OLinuXino-M_defconfig | 4 +
>> configs/A13-OLinuXinoM_defconfig | 2 +-
>> configs/A13-OLinuXino_defconfig | 4 +
>> configs/A20-OLinuXino_MICRO_defconfig | 4 +
>> configs/Auxtek-T004_defconfig | 4 +
>> configs/Bananapi_defconfig | 4 +
>> configs/Cubieboard2_FEL_defconfig | 2 +-
>> configs/Cubieboard2_defconfig | 2 +-
>> configs/Cubieboard_defconfig | 2 +-
>> configs/Cubietruck_FEL_defconfig | 2 +-
>> configs/Cubietruck_defconfig | 2 +-
>> configs/Linksprite_pcDuino3_defconfig | 4 +
>> configs/Mele_A1000G_defconfig | 4 +
>> configs/Mele_A1000_defconfig | 4 +
>> configs/Mini-X-1Gb_defconfig | 4 +
>> configs/Mini-X_defconfig | 4 +
>> configs/ba10_tv_box_defconfig | 4 +
>> configs/i12-tvbox_defconfig | 4 +
>> configs/qt840a_defconfig | 4 +
>> configs/r7-tv-dongle_defconfig | 2 +-
>> drivers/block/ahci.c | 16 ++
>> drivers/usb/host/Makefile | 1 +
>> drivers/usb/host/ehci-sunxi.c | 201 +++++++++++++++++++++++++
>> include/ahci.h | 4 +
>> include/configs/sun4i.h | 12 ++
>> include/configs/sun5i.h | 5 +
>> include/configs/sun7i.h | 19 +++
>> include/configs/sunxi-common.h | 18 +++
>> 48 files changed, 982 insertions(+), 13 deletions(-)
>> create mode 100644 arch/arm/cpu/armv7/sunxi/psci.S
>> create mode 100644 board/sunxi/ahci.c
>> create mode 100644 board/sunxi/dram_a10_olinuxino_l.c
>> create mode 100644 board/sunxi/dram_a10s_olinuxino_m.c
>> create mode 100644 board/sunxi/dram_a13_olinuxino.c
>> create mode 100644 board/sunxi/dram_bananapi.c
>> create mode 100644 board/sunxi/dram_linksprite_pcduino3.c
>> create mode 100644 board/sunxi/dram_sun4i_360_1024_iow16.c
>> create mode 100644 board/sunxi/dram_sun4i_360_1024_iow8.c
>> create mode 100644 board/sunxi/dram_sun4i_360_512.c
>> create mode 100644 board/sunxi/dram_sun4i_384_1024_iow8.c
>> create mode 100644 board/sunxi/dram_sun7i_384_1024_iow16.c
>> create mode 100644 board/sunxi/dram_sun7i_384_512_busw16_iow16.c
>> create mode 100644 configs/A10-OLinuXino-Lime_defconfig
>> create mode 100644 configs/A10s-OLinuXino-M_defconfig
>> create mode 100644 configs/A13-OLinuXino_defconfig
>> create mode 100644 configs/A20-OLinuXino_MICRO_defconfig
>> create mode 100644 configs/Auxtek-T004_defconfig
>> create mode 100644 configs/Bananapi_defconfig
>> create mode 100644 configs/Linksprite_pcDuino3_defconfig
>> create mode 100644 configs/Mele_A1000G_defconfig
>> create mode 100644 configs/Mele_A1000_defconfig
>> create mode 100644 configs/Mini-X-1Gb_defconfig
>> create mode 100644 configs/Mini-X_defconfig
>> create mode 100644 configs/ba10_tv_box_defconfig
>> create mode 100644 configs/i12-tvbox_defconfig
>> create mode 100644 configs/qt840a_defconfig
>> create mode 100644 drivers/usb/host/ehci-sunxi.c
>
> Applied to u-boot/master, thanks!
Many thanks for pulling this in!
Note I've had a second pull req pending to Albert on top
of the one which he had already merged. I'll re-send
the pull-req mail to you right away.
Regards,
Hans
prev parent reply other threads:[~2014-08-28 21:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-28 17:02 [U-Boot] Please pull u-boot-arm/master Tom Rini
2014-08-28 19:50 ` Tom Rini
2014-08-28 21:19 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FF9CF5.1060309@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.