Re: [PATCH 13/15] ARM: tegra: apalis-tk1: fix pcie switch vendor compatible

[Stefan Agner <stefan@agner.ch>]

On 24.07.2018 12:43, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> PLX got bought by Broadcom therefore fix device tree compatible string
> vendor which silences the following checkpatch.pl warning:
> 
> WARNING: DT compatible string vendor "plx" appears un-documented
>  -- check ./Documentation/devicetree/bindings/vendor-prefixes.txt

This seems to be not the only instance, there are other places where plx
prefix is used. There are 8 instances in total, 4 ARM (in fact all
Toradex device trees) and 4 PowerPC.

One device is already documented in
Documentation/devicetree/bindings/trivial-devices.txt:
plx,pex8648               48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s)
Switch

I suggest to just add plx as a valid vendor prefix by adding plx to
Documentation/devicetree/bindings/vendor-prefixes.txt:
plx	Broadcom Corporation (formerly PLX Technology)

--
Stefan

> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> ---
> 
>  arch/arm/boot/dts/tegra124-apalis-eval.dts      | 2 +-
>  arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts
> b/arch/arm/boot/dts/tegra124-apalis-eval.dts
> index d9805fc97f5e..84ab7dc9febb 100644
> --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
> +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
> @@ -109,7 +109,7 @@
>  		clock-frequency = <400000>;
>  
>  		pcie-switch@58 {
> -			compatible = "plx,pex8605";
> +			compatible = "brcm,pex8605";
>  			reg = <0x58>;
>  		};
>  
> diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
> b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
> index 89783fe76f65..5319f88d3cab 100644
> --- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
> +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
> @@ -74,7 +74,7 @@
>  		clock-frequency = <400000>;
>  
>  		pcie-switch@58 {
> -			compatible = "plx,pex8605";
> +			compatible = "brcm,pex8605";
>  			reg = <0x58>;
>  		};