From: Li Ye-B37916 <b37916@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board
Date: Fri, 5 Sep 2014 20:15:22 +0800 [thread overview]
Message-ID: <5409A95A.6040202@freescale.com> (raw)
In-Reply-To: <CAP9ODKoL32Gw5PNacFDUCLOVrNLrF_dm6HZJbvOx=9sQOG1GAg@mail.gmail.com>
On 9/5/2014 2:43 AM, Otavio Salvador wrote:
> Hello Ye,
>
> On Thu, Sep 4, 2014 at 11:17 AM, Ye.Li <B37916@freescale.com> wrote:
>> This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
>> shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
>> pin-pin compatible with i.MX6Q.
>>
>> The patch also support the DDR 32-BIT mode option. Please define
>> CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
>> mode.But due to the board design, it's 64bit DDR buswidth physically,
>> so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
>>
>> Signed-off-by: Ye.Li <B37916@freescale.com>
> Your patch short log could be improved for:
>
> imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
>
> This could be reworked on the other patches as well.
>
> My 2c.
>
Thanks for your comments. I will rework the short logs in v3.
Best regards,
Ye Li
next prev parent reply other threads:[~2014-09-05 12:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 18:43 [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board Otavio Salvador
2014-09-05 12:15 ` Li Ye-B37916 [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-09-04 14:17 [U-Boot] [PATCH v2 1/5] iMX6Q:arm2: Add the kernel FDT Loading support Ye.Li
2014-09-04 14:17 ` [U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board Ye.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5409A95A.6040202@freescale.com \
--to=b37916@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.