From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <540A23A6.8040205@xenomai.org> Date: Fri, 05 Sep 2014 22:57:10 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <20140905184346.GN17690@csclub.uwaterloo.ca> <540A0A92.2000405@xenomai.org> <20140905191447.GO17690@csclub.uwaterloo.ca> <540A19DC.10507@xenomai.org> <540A1B2C.2050309@xenomai.org> <540A1DA7.8090906@xenomai.org> <20140905205404.GP17690@csclub.uwaterloo.ca> In-Reply-To: <20140905205404.GP17690@csclub.uwaterloo.ca> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] How to get debug symbols in xenomai libraries List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Lennart Sorensen Cc: xenomai@xenomai.org On 09/05/2014 10:54 PM, Lennart Sorensen wrote: > On Fri, Sep 05, 2014 at 10:31:35PM +0200, Gilles Chanteperdrix wrote: >> Just tried a fresh build with minimal flags, simply: >> >> configure --enable-debug CFLAGS="-fomit-frame-pointer" >> --host=arm-linux-gnueabihf >> make >> arm-linux-gnueabihf-gdb src/skins/common/.libs/libxenomai.so.0.0.0 >> >> and gdb says it can find symbols. (-fomit-frame-pointer is needed with >> the toolchain I use, otherwise gcc complains that it can not use the r7 >> register). > > I tried adding that option, and still gdb says no symbols. > > Toolchain is debian wheezy's gcc 4.6, and everything is natively compiled. > Do you build the package manually, like I just did? Or do you use the debian/rules stuff? -- Gilles.