All of lore.kernel.org
 help / color / mirror / Atom feed
From: Prarit Bhargava <prarit@redhat.com>
To: xfs@oss.sgi.com, Eric Sandeen <esandeen@redhat.com>
Subject: lockdep warning when logging in with ssh
Date: Wed, 10 Sep 2014 14:59:31 -0400	[thread overview]
Message-ID: <54109F93.9020206@redhat.com> (raw)

I see this when I attempt to login via ssh.  I do not see it if I login on
the serial console.  I recall seeing it earlier when chasing another patch but
cannot recall the kernel version.


[  201.054547] ======================================================
[  201.082819] [ INFO: possible circular locking dependency detected ]
[  201.112071] 3.17.0-rc4+ #1 Not tainted
[  201.129705] -------------------------------------------------------
[  201.158238] sshd/8554 is trying to acquire lock:
[  201.179054]  (&isec->lock){+.+.+.}, at: [<ffffffff812fc885>]
inode_doinit_with_dentry+0xc5/0x670
[  201.219847]
[  201.219847] but task is already holding lock:
[  201.247255]  (&mm->mmap_sem){++++++}, at: [<ffffffff811d32bf>]
vm_mmap_pgoff+0x8f/0xf0
[  201.283640]
[  201.283640] which lock already depends on the new lock.
[  201.283640]
[  201.321218]
[  201.321218] the existing dependency chain (in reverse order) is:
[  201.356331]
-> #2 (&mm->mmap_sem){++++++}:
[  201.377731]        [<ffffffff810e0d70>] __lock_acquire+0x380/0xb50
[  201.406027]        [<ffffffff810e1d19>] lock_acquire+0x99/0x1d0
[  201.432867]        [<ffffffff811e2cbc>] might_fault+0x8c/0xb0
[  201.458823]        [<ffffffff81251361>] filldir+0x91/0x120
[  201.483514]        [<ffffffffa01b8d7e>]
xfs_dir2_block_getdents.isra.12+0x1be/0x220 [xfs]
[  201.521199]        [<ffffffffa01b8fe4>] xfs_readdir+0x1a4/0x2a0 [xfs]
[  201.550249]        [<ffffffffa01bb79b>] xfs_file_readdir+0x2b/0x30 [xfs]
[  201.581293]        [<ffffffff8125114e>] iterate_dir+0xae/0x140
[  201.607964]        [<ffffffff8125166d>] SyS_getdents+0x9d/0x130
[  201.635824]        [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b
[  201.665367]
-> #1 (&xfs_dir_ilock_class){++++.+}:
[  201.687368]        [<ffffffff810e0d70>] __lock_acquire+0x380/0xb50
[  201.716063]        [<ffffffff810e1d19>] lock_acquire+0x99/0x1d0
[  201.743603]        [<ffffffff810da997>] down_read_nested+0x57/0xa0
[  201.771960]        [<ffffffffa01ca662>] xfs_ilock+0x122/0x250 [xfs]
[  201.800555]        [<ffffffffa01ca804>] xfs_ilock_attr_map_shared+0x34/0x40 [xfs]
[  201.834681]        [<ffffffffa016a4f0>] xfs_attr_get+0xc0/0x1b0 [xfs]
[  201.864877]        [<ffffffffa01dafbd>] xfs_xattr_get+0x3d/0x80 [xfs]
[  201.895005]        [<ffffffff81265f7f>] generic_getxattr+0x4f/0x70
[  201.923173]        [<ffffffff812fc932>] inode_doinit_with_dentry+0x172/0x670
[  201.955329]        [<ffffffff812fcf08>] sb_finish_set_opts+0xd8/0x270
[  201.984446]        [<ffffffff812fd36d>] selinux_set_mnt_opts+0x2cd/0x630
[  202.015726]        [<ffffffff812fd747>] superblock_doinit+0x77/0xf0
[  202.044073]        [<ffffffff812fd7d0>] delayed_superblock_init+0x10/0x20
[  202.074967]        [<ffffffff8123f372>] iterate_supers+0xb2/0x110
[  202.103173]        [<ffffffff812fefe3>] selinux_complete_init+0x33/0x40
[  202.133771]        [<ffffffff8130eea3>] security_load_policy+0x103/0x620
[  202.164131]        [<ffffffff81300d4b>] sel_write_load+0xbb/0x780
[  202.191891]        [<ffffffff8123b64a>] vfs_write+0xba/0x1f0
[  202.217918]        [<ffffffff8123c298>] SyS_write+0x58/0xd0
[  202.243473]        [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b
[  202.273205]
-> #0 (&isec->lock){+.+.+.}:
[  202.292818]        [<ffffffff810dff29>] validate_chain.isra.43+0x10d9/0x1170
[  202.324616]        [<ffffffff810e0d70>] __lock_acquire+0x380/0xb50
[  202.352176]        [<ffffffff810e1d19>] lock_acquire+0x99/0x1d0
[  202.379637]        [<ffffffff817209e8>] mutex_lock_nested+0x88/0x520
[  202.408647]        [<ffffffff812fc885>] inode_doinit_with_dentry+0xc5/0x670
[  202.440389]        [<ffffffff812fda7c>] selinux_d_instantiate+0x1c/0x20
[  202.470704]        [<ffffffff812f138b>] security_d_instantiate+0x1b/0x30
[  202.501868]        [<ffffffff812555f0>] d_instantiate+0x50/0x70
[  202.528664]        [<ffffffff811cef9f>] __shmem_file_setup+0xef/0x1f0
[  202.557658]        [<ffffffff811d2c88>] shmem_zero_setup+0x28/0x70
[  202.585826]        [<ffffffff811ee402>] mmap_region+0x522/0x610
[  202.613190]        [<ffffffff811ee7f1>] do_mmap_pgoff+0x301/0x3d0
[  202.641687]        [<ffffffff811d32e0>] vm_mmap_pgoff+0xb0/0xf0
[  202.668753]        [<ffffffff811ecce6>] SyS_mmap_pgoff+0x116/0x290
[  202.697026]        [<ffffffff810211a2>] SyS_mmap+0x22/0x30
[  202.722424]        [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b
[  202.751931]
[  202.751931] other info that might help us debug this:
[  202.751931]
[  202.788578] Chain exists of:
  &isec->lock --> &xfs_dir_ilock_class --> &mm->mmap_sem

[  202.824995]  Possible unsafe locking scenario:
[  202.824995]
[  202.851334]        CPU0                    CPU1
[  202.872186]        ----                    ----
[  202.892929]   lock(&mm->mmap_sem);
[  202.908542]                                lock(&xfs_dir_ilock_class);
[  202.938063]                                lock(&mm->mmap_sem);
[  202.964735]   lock(&isec->lock);
[  202.979226]
[  202.979226]  *** DEADLOCK ***
[  202.979226]
[  203.006150] 1 lock held by sshd/8554:
[  203.023836]  #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff811d32bf>]
vm_mmap_pgoff+0x8f/0xf0
[  203.062439]
[  203.062439] stack backtrace:
[  203.082082] CPU: 1 PID: 8554 Comm: sshd Not tainted 3.17.0-rc4+ #1
[  203.110336] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 08/24/2013
[  203.143994]  0000000000000 00000000d8562903 ffff88006c333a58 ffffffff8171b358
[  203.671383]  ffffffff82accf70 ffff88006c333a98 ffffffff8171444a ffff88006c333ad0
[  203.705097]  ffff88003507b718 ffff88003507b718 0000000000000000 ffff88003507aa10
[  203.738777] Call Trace:
[  203.749696]  [<ffffffff8171b358>] dump_stack+0x4d/0x66
[  203.774113]  [<ffffffff8171444a>] print_circular_bug+0x1f9/0x207
[  203.801532]  [<ffffffff810dff29>] validate_chain.isra.43+0x10d9/0x1170
[  203.831325]  [<ffffffff810e0d70>] __lock_acquire+0x380/0xb50
[  203.857340]  [<ffffffff810e1d19>] lock_acquire+0x99/0x1d0
[  203.882653]  [<ffffffff812fc885>] ? inode_doinit_with_dentry+0xc5/0x670
[  203.913148]  [<ffffffff817209e8>] mutex_lock_nested+0x88/0x520
[  203.939761]  [<ffffffff812fc885>] ? inode_doinit_with_dentry+0xc5/0x670
[  203.969908]  [<ffffffff812fc885>] ? inode_doinit_with_dentry+0xc5/0x670
[  203.999854]  [<ffffffff810252c5>] ? native_sched_clock+0x35/0xa0
[  204.029374]  [<ffffffff81025339>] ? sched_clock+0x9/0x10
[  204.053170]  [<ffffffff812fc885>] inode_doinit_with_dentry+0xc5/0x670
[  204.181571]  [<ffffffff810dc67f>] ? lock_release_holdtime.part.28+0xf/0x190
[  204.213464]  [<ffffffff812fda7c>] selinux_d_instantiate+0x1c/0x20
[  204.241190]  [<ffffffff812f138b>] security_d_instantiate+0x1b/0x30
[  204.269524]  [<ffffffff812555f0>] d_instantiate+0x50/0x70
[  204.293826]  [<ffffffff811cef9f>] __shmem_file_setup+0xef/0x1f0
[  204.320845]  [<ffffffff811d2c88>] shmem_zero_setup+0x28/0x70
[  204.346843]  [<ffffffff811ee402>] mmap_region+0x522/0x610
[  204.371943]  [<ffffffff811ee7f1>] do_mmap_pgoff+0x301/0x3d0
[  204.398095]  [<ffffffff811d32e0>] vm_mmap_pgoff+0xb0/0xf0
[  204.422903]  [<ffffffff811ecce6>] SyS_mmap_pgoff+0x116/0x290
[  204.448487]  [<ffffffff810e05cd>] ? trace_hardirqs_on+0xd/0x10
[  204.475204]  [<ffffffff810211a2>] SyS_mmap+0x22/0x30
[  204.498005]  [<ffffffff81725b69>] system_call_fastpath+0x16/0x1b
[  204.526495] [sched_delayed] sched: RT throttling activated

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

             reply	other threads:[~2014-09-10 18:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-10 18:59 Prarit Bhargava [this message]
2014-09-10 20:23 ` lockdep warning when logging in with ssh Dave Chinner
2014-09-10 22:40   ` Prarit Bhargava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54109F93.9020206@redhat.com \
    --to=prarit@redhat.com \
    --cc=esandeen@redhat.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.